From: Julian Margetson <runaway@candw.ms>
To: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave@sr71.net>,
Maling list - DRI developers <dri-devel@lists.freedesktop.org>,
aperez@alexperez.com, chzigotzky@xenosoft.de
Subject: Re: [BUG/REGRESSION] Kernel 4.5-rc1 on Acube Sam460ex AMCC 460ex Power PC motherboards
Date: Mon, 25 Jan 2016 16:35:14 -0400 [thread overview]
Message-ID: <56A68702.5040909@candw.ms> (raw)
In-Reply-To: <CAPcyv4j-b0yANLfXstehDHFNdOdRNjjASremTN9yNmj9rTs2Og@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 57976 bytes --]
On 1/25/2016 3:20 PM, Dan Williams wrote:
> On Mon, Jan 25, 2016 at 4:46 AM, Julian Margetson <runaway@candw.ms> wrote:
>> Oops starting Xorg with kernel 4.5-rc1 on Acube Sam460ex amcc460ex powerpc
>> motherboard.
>>
>> ======================================================================================================================
>> 01c8f1c44b83a0825b573e7c723b033cece37b86 is the first bad commit
>> commit 01c8f1c44b83a0825b573e7c723b033cece37b86
>> Author: Dan Williams <dan.j.williams@intel.com>
>> Date: Fri Jan 15 16:56:40 2016 -0800
>>
>> mm, dax, gpu: convert vm_insert_mixed to pfn_t
>>
>> Convert the raw unsigned long 'pfn' argument to pfn_t for the purpose of
>> evaluating the PFN_MAP and PFN_DEV flags. When both are set it triggers
>> _PAGE_DEVMAP to be set in the resulting pte.
>>
>> There are no functional changes to the gpu drivers as a result of this
>> conversion.
>>
>> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>> Cc: Dave Hansen <dave@sr71.net>
>> Cc: David Airlie <airlied@linux.ie>
>> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
>> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
>>
>> :040000 040000 dc71b6dc188dea4b6ce95f5fd1e4e73cc3663cbe
>> 8a745459a14cd2a6f4e1c71fda3e54333d023f43 M arch
>> :040000 040000 9e8103b65698f677e17becdac53914ca029a6197
>> f656e15bffef4ea8c848176a79eb50a071ec323e M drivers
>> :040000 040000 3ffc222d7e0f1067772798d08777aeb54136026e
>> e2b423f85aaaf0cb25d48d1e15771fc5bddf7981 M fs
>> :040000 040000 392d2dea8185ba8f0d1c101782831ceed9aa9812
>> 9e3001b04052daa1b3204b6f2a6e26138a4ed7dd M include
>> :040000 040000 f81d8cfe3052b7259b75a58656a65efdaad40284
>> 969d0ff262020f27a695172ce89ae5f6088e8d44 M mm
>>
> Hmm, this commit could only cause a behavior change if it modifies the
> value of the pfn as seen by insert_pfn(). Can you try the attached
> debug patch to see if that assumption is being violated?
Had to manually delete the lines in the second part of the patch.
=====================================================================================================
U-Boot 2015.a (May 16 2015 - 14:20:11)
CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex/cr, PCIe 4x + SATA-2
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)
PCI: Bus Dev VenId DevId Class Int
00 04 1095 3512 0104 00
00 06 126f 0501 0380 00
PCIE1: successfully set as root-complex
02 00 1002 683f 0300 ff
Net: ppc_4xx_eth0
FPGA: Revision 03 (2010-10-07)
SM502: found
PERMD2:not found
VGA: 1
VESA: OK
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sdb8 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2002928K/2097152K available (6792K kernel code, 288K rwdata, 3228K rodata, 236K init, 345K bss, 94224K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000026] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000153] Console: colour dummy device 80x25
[ 0.000701] console [tty0] enabled
[ 0.000736] pid_max: default: 32768 minimum: 301
[ 0.000857] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000887] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003319] devtmpfs: initialized
[ 0.005924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006415] xor: measuring software checksum speed
[ 0.016352] 8regs : 856.000 MB/sec
[ 0.026364] 8regs_prefetch: 800.000 MB/sec
[ 0.036395] 32regs : 1116.000 MB/sec
[ 0.046431] 32regs_prefetch: 968.000 MB/sec
[ 0.046452] xor: using function: 32regs (1116.000 MB/sec)
[ 0.046500] prandom: seed boundary self test passed
[ 0.048968] prandom: 100 self tests passed
[ 0.049578] NET: Registered protocol family 16
[ 0.052553] cpuidle: using governor ladder
[ 0.055588] cpuidle: using governor menu
[ 0.056010] 256k L2-cache enabled
[ 0.056114] PCIE0: Port disabled via device-tree
[ 0.056174] PCIE1: Checking link...
[ 0.056191] PCIE1: Device detected, waiting for link...
[ 0.056210] PCIE1: link is up !
[ 0.158442] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158492] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158528] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158560] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158597] 4xx PCI DMA offset set to 0x00000000
[ 0.158615] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158634] DMA window size 0x0000000080000000
[ 0.158669] PCIE1: successfully set as root-complex
[ 0.158763] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158792] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158827] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158859] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158888] 4xx PCI DMA offset set to 0x00000000
[ 0.158906] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158924] DMA window size 0x0000000080000000
[ 0.167634] PCI: Probing PCI hardware
[ 0.167833] PCI host bridge to bus 0000:80
[ 0.167868] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.167906] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.167943] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.167982] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.168148] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.169020] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.169276] PCI host bridge to bus 0001:00
[ 0.169304] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.169330] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.169367] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.169403] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.170007] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170050] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.170093] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.170128] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170172] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.170211] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.170245] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.170283] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.170311] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.170335] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.170361] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.170387] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170486] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.170514] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.170542] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.170574] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.170601] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.170626] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.170652] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.170677] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.170703] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.198367] raid6: int32x1 gen() 304 MB/s
[ 0.215530] raid6: int32x1 xor() 173 MB/s
[ 0.232551] raid6: int32x2 gen() 433 MB/s
[ 0.249639] raid6: int32x2 xor() 246 MB/s
[ 0.266698] raid6: int32x4 gen() 476 MB/s
[ 0.283727] raid6: int32x4 xor() 273 MB/s
[ 0.300818] raid6: int32x8 gen() 234 MB/s
[ 0.317987] raid6: int32x8 xor() 218 MB/s
[ 0.318011] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.318030] raid6: .... xor() 273 MB/s, rmw enabled
[ 0.318049] raid6: using intx1 recovery algorithm
[ 0.318354] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.318396] vgaarb: loaded
[ 0.318412] vgaarb: bridge control possible 0000:81:00.0
[ 0.318692] SCSI subsystem initialized
[ 0.319112] usbcore: registered new interface driver usbfs
[ 0.319184] usbcore: registered new interface driver hub
[ 0.319254] usbcore: registered new device driver usb
[ 0.319376] pps_core: LinuxPPS API ver. 1 registered
[ 0.319396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.319442] PTP clock support registered
[ 0.319603] EDAC MC: Ver: 3.0.0
[ 0.320015] Advanced Linux Sound Architecture Driver Initialized.
[ 0.339804] DMA-API: preallocated 65536 debug entries
[ 0.339849] DMA-API: debugging enabled by kernel config
[ 0.339901] clocksource: Switched to clocksource timebase
[ 0.346495] NET: Registered protocol family 2
[ 0.347119] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.347254] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.347578] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.347705] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.347787] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.348145] NET: Registered protocol family 1
[ 0.348494] RPC: Registered named UNIX socket transport module.
[ 0.348527] RPC: Registered udp transport module.
[ 0.348545] RPC: Registered tcp transport module.
[ 0.348562] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.349271] Could not remap bcsr
[ 0.352416] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.355322] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.365603] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.366065] fuse init (API version 7.24)
[ 0.370192] async_tx: api initialized (async)
[ 0.370292] bounce: pool size: 64 pages
[ 0.370371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.370408] io scheduler noop registered
[ 0.370444] io scheduler cfq registered (default)
[ 0.372509] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.372539] crc32: self tests passed, processed 225944 bytes in 892267 nsec
[ 0.373526] crc32c: CRC_LE_BITS = 64
[ 0.373547] crc32c: self tests passed, processed 225944 bytes in 446410 nsec
[ 0.441126] crc32_combine: 8373 self tests passed
[ 0.508495] crc32c_combine: 8373 self tests passed
[ 0.508555] glob: 64 self-tests passed, 0 failed
[ 0.546490] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.547353] console [ttyS0] disabled
[ 0.567522] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.498925] console [ttyS0] enabled
[ 1.523118] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.533064] console [ttyS0] disabled
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sdb8 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2002928K/2097152K available (6792K kernel code, 288K rwdata, 3228K rodata, 236K init, 345K bss, 94224K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000014] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000026] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000153] Console: colour dummy device 80x25
[ 0.000701] console [tty0] enabled
[ 0.000736] pid_max: default: 32768 minimum: 301
[ 0.000857] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000887] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003319] devtmpfs: initialized
[ 0.005924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006415] xor: measuring software checksum speed
[ 0.016352] 8regs : 856.000 MB/sec
[ 0.026364] 8regs_prefetch: 800.000 MB/sec
[ 0.036395] 32regs : 1116.000 MB/sec
[ 0.046431] 32regs_prefetch: 968.000 MB/sec
[ 0.046452] xor: using function: 32regs (1116.000 MB/sec)
[ 0.046500] prandom: seed boundary self test passed
[ 0.048968] prandom: 100 self tests passed
[ 0.049578] NET: Registered protocol family 16
[ 0.052553] cpuidle: using governor ladder
[ 0.055588] cpuidle: using governor menu
[ 0.056010] 256k L2-cache enabled
[ 0.056114] PCIE0: Port disabled via device-tree
[ 0.056174] PCIE1: Checking link...
[ 0.056191] PCIE1: Device detected, waiting for link...
[ 0.056210] PCIE1: link is up !
[ 0.158442] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158492] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158528] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158560] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158597] 4xx PCI DMA offset set to 0x00000000
[ 0.158615] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158634] DMA window size 0x0000000080000000
[ 0.158669] PCIE1: successfully set as root-complex
[ 0.158763] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158792] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158827] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158859] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158888] 4xx PCI DMA offset set to 0x00000000
[ 0.158906] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158924] DMA window size 0x0000000080000000
[ 0.167634] PCI: Probing PCI hardware
[ 0.167833] PCI host bridge to bus 0000:80
[ 0.167868] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.167906] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.167943] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.167982] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.168148] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.169020] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.169276] PCI host bridge to bus 0001:00
[ 0.169304] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.169330] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.169367] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.169403] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.170007] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170050] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.170093] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.170128] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170172] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.170211] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.170245] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.170283] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.170311] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.170335] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.170361] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.170387] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.170486] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.170514] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.170542] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.170574] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.170601] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.170626] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.170652] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.170677] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.170703] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.198367] raid6: int32x1 gen() 304 MB/s
[ 0.215530] raid6: int32x1 xor() 173 MB/s
[ 0.232551] raid6: int32x2 gen() 433 MB/s
[ 0.249639] raid6: int32x2 xor() 246 MB/s
[ 0.266698] raid6: int32x4 gen() 476 MB/s
[ 0.283727] raid6: int32x4 xor() 273 MB/s
[ 0.300818] raid6: int32x8 gen() 234 MB/s
[ 0.317987] raid6: int32x8 xor() 218 MB/s
[ 0.318011] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.318030] raid6: .... xor() 273 MB/s, rmw enabled
[ 0.318049] raid6: using intx1 recovery algorithm
[ 0.318354] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.318396] vgaarb: loaded
[ 0.318412] vgaarb: bridge control possible 0000:81:00.0
[ 0.318692] SCSI subsystem initialized
[ 0.319112] usbcore: registered new interface driver usbfs
[ 0.319184] usbcore: registered new interface driver hub
[ 0.319254] usbcore: registered new device driver usb
[ 0.319376] pps_core: LinuxPPS API ver. 1 registered
[ 0.319396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.319442] PTP clock support registered
[ 0.319603] EDAC MC: Ver: 3.0.0
[ 0.320015] Advanced Linux Sound Architecture Driver Initialized.
[ 0.339804] DMA-API: preallocated 65536 debug entries
[ 0.339849] DMA-API: debugging enabled by kernel config
[ 0.339901] clocksource: Switched to clocksource timebase
[ 0.346495] NET: Registered protocol family 2
[ 0.347119] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.347254] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.347578] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.347705] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.347787] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.348145] NET: Registered protocol family 1
[ 0.348494] RPC: Registered named UNIX socket transport module.
[ 0.348527] RPC: Registered udp transport module.
[ 0.348545] RPC: Registered tcp transport module.
[ 0.348562] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.349271] Could not remap bcsr
[ 0.352416] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.355322] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.365603] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.366065] fuse init (API version 7.24)
[ 0.370192] async_tx: api initialized (async)
[ 0.370292] bounce: pool size: 64 pages
[ 0.370371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.370408] io scheduler noop registered
[ 0.370444] io scheduler cfq registered (default)
[ 0.372509] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.372539] crc32: self tests passed, processed 225944 bytes in 892267 nsec
[ 0.373526] crc32c: CRC_LE_BITS = 64
[ 0.373547] crc32c: self tests passed, processed 225944 bytes in 446410 nsec
[ 0.441126] crc32_combine: 8373 self tests passed
[ 0.508495] crc32c_combine: 8373 self tests passed
[ 0.508555] glob: 64 self-tests passed, 0 failed
[ 0.546490] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.547353] console [ttyS0] disabled
[ 0.567522] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.498925] console [ttyS0] enabled
[ 1.523118] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.533064] console [ttyS0] disabled
[ 1.536749] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 2.492913] console [ttyS0] enabled
[ 2.497137] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 2.506495] Generic non-volatile memory driver v1.1
[ 2.511662] [drm] Initialized drm 1.1.0 20060810
[ 2.516388] [drm] radeon kernel modesetting enabled.
[ 2.522128] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 2.530153] [drm] register mmio base: 0xe90000000
[ 2.534920] [drm] register mmio size: 262144
[ 2.870869] ATOM BIOS: C44501
[ 2.874147] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.883075] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 2.890762] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.895655] [drm] RAM width 128bits DDR
[ 2.899693] [TTM] Zone kernel: Available graphics memory: 379080 kiB
[ 2.906182] [TTM] Zone highmem: Available graphics memory: 1034440 kiB
[ 2.912742] [TTM] Initializing pool allocator
[ 2.917144] [TTM] Initializing DMA pool allocator
[ 2.921968] [drm] radeon: 1024M of VRAM memory ready
[ 2.926969] [drm] radeon: 2048M of GTT memory ready.
[ 2.932023] [drm] Loading verde Microcode
[ 2.936089] [drm] Internal thermal controller with fan control
[ 2.942172] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 2.996161] [drm] radeon: dpm initialized
[ 3.002596] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 3.008858] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.025546] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.083870] [drm] PCIE GART of 2048M enabled (table at 0x00000000002E8000).
[ 3.091222] radeon 0000:81:00.0: WB enabled
[ 3.095467] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xee502c00
[ 3.105591] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xee502c04
[ 3.115712] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xee502c08
[ 3.125834] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xee502c0c
[ 3.135955] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xee502c10
[ 3.176198] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.213058] radeon 0000:81:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xee502c18
[ 3.223227] radeon 0000:81:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xee502c1c
[ 3.233352] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.239986] [drm] Driver supports precise vblank timestamp query.
[ 3.246100] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.252019] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.260286] radeon 0000:81:00.0: radeon: using MSI.
[ 3.265244] [drm] radeon: irq initialized.
[ 4.023305] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 4.032164] radeon 0000:81:00.0: disabling GPU acceleration
[ 4.240830] [drm] Radeon Display Connectors
[ 4.245116] [drm] Connector 0:
[ 4.248218] [drm] HDMI-A-1
[ 4.251131] [drm] HPD4
[ 4.253688] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.261113] [drm] Encoders:
[ 4.264101] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.268389] [drm] Connector 1:
[ 4.271461] [drm] DVI-I-1
[ 4.274275] [drm] HPD2
[ 4.276830] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.284255] [drm] Encoders:
[ 4.287242] [drm] DFP2: INTERNAL_UNIPHY
[ 4.291445] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.408527] [drm] fb mappable at 0x806E9000
[ 4.412752] [drm] vram apper at 0x80000000
[ 4.416871] [drm] size 8294400
[ 4.419941] [drm] fb depth is 24
[ 4.423189] [drm] pitch is 7680
[ 4.700950] Console: switching to colour frame buffer device 240x67
[ 4.779001] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 4.787966] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 4.805061] brd: module loaded
[ 4.812839] loop: module loaded
[ 4.816388] sm501 0001:00:06.0: enabling device (0004 -> 0006)
[ 4.822658] sm501 0001:00:06.0: SM501 At f6980000: Version 050100c0, 64 Mb, IRQ 21
[ 4.830721] sm501 0001:00:06.0: setting M1XCLK to 144000000
[ 4.852915] sm501 0001:00:06.0: setting MCLK to 72000000
[ 4.908970] serial8250 serial8250.9: unable to register port at index 0 (IO0 MEMd84030000 IRQ21): -28
[ 4.918737] serial8250 serial8250.9: unable to register port at index 1 (IO0 MEMd84030020 IRQ21): -28
[ 6.456828] sm501-fb sm501-fb.80: fb sm501fb-crt disabled at start
[ 6.463400] sm501-fb sm501-fb.80: using mode default mode
[ 6.469336] sm501-fb sm501-fb.80: fb1: sm501fb-crt frame buffer
[ 6.475620] sm501-fb sm501-fb.80: fb sm501fb-panel enabled at start
[ 6.482250] sm501-fb sm501-fb.80: using mode default mode
[ 6.488122] sm501-fb sm501-fb.80: fb2: sm501fb-panel frame buffer
[ 6.494929] sata-dwc 4bffd1000.sata: no dma-channel property set. Use channel 0
[ 6.502711] sata-dwc 4bffd1000.sata: id 0, controller version 1.82
[ 6.509321] sata-dwc 4bffd1000.sata: DMA initialized
[ 6.515380] scsi host0: sata-dwc
[ 6.519011] ata1: SATA max UDMA/133 irq 36
[ 6.523640] sata_sil 0001:00:04.0: Applying R_ERR on DMA activate FIS errata fix
[ 6.532151] scsi host1: sata_sil
[ 6.535863] scsi host2: sata_sil
[ 6.539448] ata2: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd84280080 irq 21
[ 6.547187] ata3: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd842800c0 irq 21
[ 6.555544] PPC 4xx OCP EMAC driver, version 3.54
[ 6.561094] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 6.567298] ZMII /plb/opb/emac-zmii@ef600d00 initialized
[ 6.573030] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 6.580600] TAH /plb/opb/emac-tah@ef601350 initialized
[ 6.586087] TAH /plb/opb/emac-tah@ef601450 initialized
[ 6.591783] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
[ 6.599260] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5
[ 6.606545] eth0: found Generic MII PHY (0x00)
[ 6.611436] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
[ 6.618877] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00
[ 6.639937] eth1: found Generic MII PHY (0x01)
[ 6.658284] PPP generic driver version 2.4.2
[ 6.676468] PPP BSD Compression module registered
[ 6.694886] PPP Deflate Compression module registered
[ 6.713728] NET: Registered protocol family 24
[ 6.732270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.753226] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 6.772099] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 6.794480] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 6.820914] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 6.841523] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.862781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.883614] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.904424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.926763] usb usb1: Product: OF EHCI
[ 6.945352] usb usb1: Manufacturer: Linux 4.5.0-rc1-Sam460ex ehci_hcd
[ 6.966626] ata1.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
[ 6.988539] ata2.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 7.010395] usb usb1: SerialNumber: PPC-OF USB
[ 7.029919] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 7.051919] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32)
[ 7.074246] hub 1-0:1.0: USB hub found
[ 7.093341] hub 1-0:1.0: 1 port detected
[ 7.113439] ehci-pci: EHCI PCI platform driver
[ 7.133602] ata2.00: configured for UDMA/100
[ 7.153060] ata1.00: configured for UDMA/133
[ 7.172187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.193478] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 7.213306] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 7.236476] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
[ 7.260080] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 7.286481] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.307387] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.330939] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[ 7.361129] sd 0:0:0:0: [sda] Write Protect is off
[ 7.402020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.430466] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.453882] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 7.476729] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.519565] sd 1:0:0:0: [sdb] Write Protect is off
[ 7.550781] sda: RDSK (512) sda1 (SFS^@)(res 2 spb 1) sda2 (NTFS)(res 2 spb 1)
[ 7.587038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.622778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.656302] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 7.689442] sdb: RDSK (512) sdb1 (DOS^G)(res 2 spb 1) sdb2 (SFS^@)(res 2 spb 1) sdb3 (SFS^@)(res 2 spb 1) sdb4 (SFS^@)(res 2 spb 1) sdb5 (SFS^@)(res 2 spb 1) sdb6 (SFS^@)(res 2 spb 1) sdb7 (NTFS)(res 2 spb 2) sdb8 (EXT^C)(res 2 spb 1)
[ 7.740912] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.793127] hub 1-1:1.0: USB hub found
[ 7.817916] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 7.840606] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 7.884068] hub 1-1:1.0: 7 ports detected
[ 7.929112] ata3.00: ATAPI: ASUS DRW-24B3ST i, 1.00, max UDMA/100
[ 8.012024] ata3.00: configured for UDMA/100
[ 8.060030] scsi 2:0:0:0: CD-ROM ASUS DRW-24B3ST i 1.00 PQ: 0 ANSI: 5
[ 8.139160] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.190910] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.238913] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 8.265278] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 8.398515] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 8.442399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.468037] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 8.494290] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.520462] usb 1-1.1: Product: USB 2.0 Hub
[ 8.543455] usb usb2: Product: OF OHCI
[ 8.566286] usb usb2: Manufacturer: Linux 4.5.0-rc1-Sam460ex ohci_hcd
[ 8.591838] hub 1-1.1:1.0: USB hub found
[ 8.614677] usb usb2: SerialNumber: PPC-OF USB
[ 8.638313] hub 1-1.1:1.0: 4 ports detected
[ 8.661488] hub 2-0:1.0: USB hub found
[ 8.683966] hub 2-0:1.0: 1 port detected
[ 8.707282] sm501-usb sm501-usb.80: cannot declare coherent memory
[ 8.732309] ohci-pci: OHCI PCI platform driver
[ 8.755797] usbcore: registered new interface driver usblp
[ 8.780291] usbcore: registered new interface driver usb-storage
[ 8.804954] usbcore: registered new interface driver usbserial
[ 8.829431] usbcore: registered new interface driver usbserial_generic
[ 8.854301] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 8.879641] usbserial: USB Serial support registered for generic
[ 8.904330] mousedev: PS/2 mouse device common for all mice
[ 8.928373] i2c /dev entries driver
[ 8.952578] rtc-m41t80 8-0068: rtc core: registered m41t80 as rtc0
[ 8.978042] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 9.002599] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 9.027143] md: linear personality registered for level -1
[ 9.050842] md: raid0 personality registered for level 0
[ 9.074497] md: raid1 personality registered for level 1
[ 9.098062] md: raid10 personality registered for level 10
[ 9.122083] md: raid6 personality registered for level 6
[ 9.145948] md: raid5 personality registered for level 5
[ 9.169509] md: raid4 personality registered for level 4
[ 9.193232] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 9.219977] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 9.245012] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 9.270276] EDAC PPC4xx MC: v1.0.0
[ 9.291633] EDAC PPC4xx MC: Reporting type: interrupt
[ 9.314572] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.340289] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.363705] usb 1-1.2: Product: USB Keyboard
[ 9.386392] usbcore: registered new interface driver usbhid
[ 9.409755] usb 1-1.2: Manufacturer: CHICONY
[ 9.432004] usbhid: USB HID core driver
[ 9.456345] usbcore: registered new interface driver snd-usb-audio
[ 9.482240] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 9.513242] usbcore: registered new interface driver snd-ua101
[ 9.537727] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 9.563080] usbcore: registered new interface driver snd-usb-usx2y
[ 9.587408] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 9.612786] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 9.642605] ipip: IPv4 over IPv4 tunneling driver
[ 9.665174] Initializing XFRM netlink socket
[ 9.686801] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 9.711085] NET: Registered protocol family 10
[ 9.735629] sit: IPv6 over IPv4 tunneling driver
[ 9.758463] NET: Registered protocol family 17
[ 9.780278] NET: Registered protocol family 15
[ 9.801660] usb 1-1.6: new full-speed USB device number 6 using ppc-of-ehci
[ 9.828156] Key type encrypted registered
[ 9.850987] rtc-m41t80 8-0068: setting system clock to 2016-01-25 16:20:02 UTC (1453738802)
[ 9.876946] ALSA device list:
[ 9.896749] #0: Virtual MIDI Card 1
[ 9.930871] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 9.966080] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 9.990548] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.015609] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 10.046357] usb 1-1.6: Product: USB Receiver
[ 10.068608] usb 1-1.6: Manufacturer: Logitech
[ 10.090994] md: Waiting for all devices to be available before autodetect
[ 10.116323] md: If you don't use raid, use raid=noautodetect
[ 10.143290] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 10.225184] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 10.262424] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 10.345266] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 10.382832] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 10.415557] md: Autodetecting RAID arrays.
[ 10.439972] md: Scanned 0 and added 0 devices.
[ 10.464710] md: autorun ...
[ 10.487851] md: ... autorun DONE.
[ 10.535823] EXT4-fs (sdb8): mounting ext3 file system using the ext4 subsystem
[ 10.569642] EXT4-fs (sdb8): INFO: recovery required on readonly filesystem
[ 10.597095] usb 1-1.7: new high-speed USB device number 7 using ppc-of-ehci
[ 10.624631] EXT4-fs (sdb8): write access will be enabled during recovery
[ 10.743558] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 10.771276] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.799273] usb 1-1.7: Product: Ultra Fast Media
[ 10.824768] usb 1-1.7: Manufacturer: Generic
[ 10.849662] usb 1-1.7: SerialNumber: 000000225001
[ 10.875589] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 10.903024] scsi host3: usb-storage 1-1.7:1.0
[ 10.978184] EXT4-fs (sdb8): recovery complete
[ 11.019138] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 11.048088] VFS: Mounted root (ext3 filesystem) readonly on device 8:24.
[ 11.101971] devtmpfs: mounted
[ 11.126734] Freeing unused kernel memory: 236K (c09cc000 - c0a07000)
[ 11.330233] random: nonblocking pool is initialized
[ 11.929091] scsi 3:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 11.959805] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 11.988163] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 12.374429] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 12.484583] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 12.525626] systemd[1]: Detected architecture ppc.
[ 12.658175] systemd[1]: Set hostname to <Sam460ex>.
[ 12.978785] systemd-fstab-generator[123]: Mount point is not a valid path, ignoring.
[ 13.066346] systemd-fstab-g[123]: unhandled signal 11 at fbada494 nip 20277dbc lr 20277cdc code 30001
[ 13.439493] systemd[117]: /lib/systemd/system-generators/systemd-fstab-generator terminated by signal SEGV.
[ 13.967464] systemd[1]: Listening on Journal Socket.
[ 14.016831] systemd[1]: Reached target Swap.
[ 14.064053] systemd[1]: Created slice System Slice.
[ 14.112323] systemd[1]: Listening on udev Kernel Socket.
[ 14.161597] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.229718] systemd[1]: Starting Uncomplicated firewall...
[ 14.286069] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.411633] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 14.469142] systemd[1]: Mounting Debug File System...
[ 14.527503] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 14.579885] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 14.632854] systemd[1]: Created slice system-getty.slice.
[ 14.687092] systemd[1]: Listening on Syslog Socket.
[ 14.735184] systemd[1]: Reached target Encrypted Volumes.
[ 14.803843] systemd[1]: Starting Load Kernel Modules...
[ 14.858700] systemd[1]: Reached target User and Group Name Lookups.
[ 14.913471] systemd[1]: Listening on udev Control Socket.
[ 14.959286] systemd[1]: Created slice User and Session Slice.
[ 15.005079] systemd[1]: Reached target Remote File Systems (Pre).
[ 15.051342] systemd[1]: Reached target Remote File Systems.
[ 15.097719] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.147194] systemd[1]: Starting Journal Service...
[ 15.199097] systemd[1]: Started Read required files in advance.
[ 15.256564] systemd[1]: Reached target Slices.
[ 15.307719] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.360981] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 15.416013] systemd[1]: Mounted Debug File System.
[ 15.462992] systemd[1]: Mounted POSIX Message Queue File System.
[ 15.516573] systemd[1]: Started Uncomplicated firewall.
[ 15.564651] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 15.596487] systemd[1]: Failed to start Load Kernel Modules.
[ 15.665067] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 15.692559] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 15.859314] systemd[1]: Starting Apply Kernel Variables...
[ 15.918122] systemd[1]: Mounting Configuration File System...
[ 15.985418] systemd[1]: Mounting FUSE Control File System...
[ 16.071357] systemd[1]: Mounted FUSE Control File System.
[ 16.169226] systemd[1]: Mounted Configuration File System.
[ 16.359733] systemd[1]: Started Create Static Device Nodes in /dev.
[ 42.557813] Oops: Machine check, sig: 7 [#1]
[ 42.562350] PREEMPT Canyonlands
[ 42.565692] Modules linked in:
[ 42.568933] CPU: 0 PID: 495 Comm: Xorg Tainted: G W 4.5.0-rc1-Sam460ex #1
[ 42.577291] task: ee3adcc0 ti: ee260000 task.ti: ee260000
[ 42.582984] NIP: 1ff72480 LR: 1ff72404 CTR: 1ff724d0
[ 42.588220] REGS: ee261f10 TRAP: 0214 Tainted: G W (4.5.0-rc1-Sam460ex)
[ 42.596663] MSR: 0002d000 <CE,EE,PR,ME> CR: 24004242 XER: 00000000
[ 42.603512]
GPR00: 1f436134 bfc4dac0 b79cb6f0 b718dffc b69a4008 00000780 00000004 00000000
GPR08: 00000000 b718dffc 00000000 bfc4da70 1ff72404 2080dff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20aaa620 00000438 b69a4008
GPR24: 00000780 bfc4db18 20a94760 b718e000 b718e000 b69a4008 2007aff4 00001e00
[ 42.635363] NIP [1ff72480] 0x1ff72480
[ 42.639225] LR [1ff72404] 0x1ff72404
[ 42.642991] Call Trace:
[ 42.798393] ---[ end trace 8fcfa5f0e9942055 ]---
[ 42.803009]
[ 44.933018] Machine check in kernel mode.
[ 44.937048] Data Write PLB Error
[ 44.940274] Machine Check exception is imprecise
[ 44.944901] Vector: 214 at [ecd97f10]
[ 44.948651] pc: 1fc79480
[ 44.951568] lr: 1fc79404
[ 44.954485] sp: bff1c530
[ 44.957367] msr: 2f900
[ 44.959989] current = 0xecd933c0
[ 44.963393] pid = 663, comm = Xorg
[ 44.967318] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 44.981242] enter ? for help
[ 44.984121] mon> <no input ...>
[ 46.987410] Oops: Machine check, sig: 7 [#2]
[ 46.991932] PREEMPT Canyonlands
[ 46.995266] Modules linked in:
[ 46.998510] CPU: 0 PID: 663 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 47.006866] task: ecd933c0 ti: ecd96000 task.ti: ecd96000
[ 47.012559] NIP: 1fc79480 LR: 1fc79404 CTR: 1fc794d0
[ 47.017795] REGS: ecd97f10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 47.026238] MSR: 0002f900 <CE,EE,PR,FP,ME> CR: 28004262 XER: 00000000
[ 47.033382]
GPR00: 1f13d134 bff1c530 b7d1d6f0 b74dfffc b6cf6008 00000780 00000004 00000000
GPR08: 00000000 b74dfffc 00000000 bff1c4e0 1fc79404 20514ff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 206a5650 00000438 b6cf6008
GPR24: 00000780 bff1c588 2068f760 b74e0000 b74e0000 b6cf6008 1fd81ff4 00001e00
[ 47.065234] NIP [1fc79480] 0x1fc79480
[ 47.069095] LR [1fc79404] 0x1fc79404
[ 47.072861] Call Trace:
[ 47.075444] ---[ end trace 8fcfa5f0e9942056 ]---
[ 47.080066]
[ 49.549662] Machine check in kernel mode.
[ 49.553698] Data Write PLB Error
[ 49.556924] Machine Check exception is imprecise
[ 49.561550] Vector: 214 at [ecfedf10]
[ 49.565301] pc: 1fa55480
[ 49.568217] lr: 1fa55404
[ 49.571135] sp: bfd89040
[ 49.574017] msr: 2f900
[ 49.576638] current = 0xecd92e00
[ 49.580042] pid = 676, comm = Xorg
[ 49.583968] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 49.597893] enter ? for help
[ 49.600779] mon> <no input ...>
[ 51.604068] Oops: Machine check, sig: 7 [#3]
[ 51.608590] PREEMPT Canyonlands
[ 51.611924] Modules linked in:
[ 51.615168] CPU: 0 PID: 676 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 51.623524] task: ecd92e00 ti: ecfec000 task.ti: ecfec000
[ 51.629218] NIP: 1fa55480 LR: 1fa55404 CTR: 1fa554d0
[ 51.634452] REGS: ecfedf10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 51.642896] MSR: 0002f900 <CE,EE,PR,FP,ME> CR: 24004242 XER: 00000000
[ 51.650040]
GPR00: 1ef19134 bfd89040 b78886f0 b704affc b6861008 00000780 00000004 00000000
GPR08: 00000000 b704affc 00000000 bfd88ff0 1fa55404 202f0ff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20ae5650 00000438 b6861008
GPR24: 00000780 bfd89098 20acf760 b704b000 b704b000 b6861008 1fb5dff4 00001e00
[ 51.681892] NIP [1fa55480] 0x1fa55480
[ 51.685753] LR [1fa55404] 0x1fa55404
[ 51.689520] Call Trace:
[ 51.692103] ---[ end trace 8fcfa5f0e9942057 ]---
[ 51.696725]
[ 54.437214] Machine check in kernel mode.
[ 54.441250] Data Write PLB Error
[ 54.444476] Machine Check exception is imprecise
[ 54.449102] Vector: 214 at [ecf55f10]
[ 54.452853] pc: 20119480
[ 54.455769] lr: 20119404
[ 54.458687] sp: bf83ad90
[ 54.461569] msr: 2d000
[ 54.464190] current = 0xecd92e00
[ 54.467594] pid = 693, comm = Xorg
[ 54.471519] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 54.485446] enter ? for help
[ 54.488331] mon> <no input ...>
[ 56.491620] Oops: Machine check, sig: 7 [#4]
[ 56.496142] PREEMPT Canyonlands
[ 56.499468] Modules linked in:
[ 56.502712] CPU: 0 PID: 693 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 56.528256] task: ecd92e00 ti: ecf54000 task.ti: ecf54000
[ 56.551110] NIP: 20119480 LR: 20119404 CTR: 201194d0
[ 56.573359] REGS: ecf55f10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 56.598643] MSR: 0002d000 <CE,EE,PR,ME> CR: 28004262 XER: 00000000
[ 56.622264]
GPR00: 1f5dd134 bf83ad90 b7a736f0 b7235ffc b6a4c008 00000780 00000004 00000000
GPR08: 00000000 b7235ffc 00000000 bf83ad40 20119404 209b4ff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20a21650 00000438 b6a4c008
GPR24: 00000780 bf83ade8 20a0b730 b7236000 b7236000 b6a4c008 20221ff4 00001e00
[ 56.738794] NIP [20119480] 0x20119480
[ 56.759652] LR [20119404] 0x20119404
[ 56.780310] Call Trace:
[ 56.799622] ---[ end trace 8fcfa5f0e9942058 ]---
[ 56.804242]
[ 59.645108] Machine check in kernel mode.
[ 59.649140] Data Write PLB Error
[ 59.652367] Machine Check exception is imprecise
[ 59.656994] Vector: 214 at [ee077f10]
[ 59.660743] pc: 1ff96480
[ 59.663660] lr: 1ff96404
[ 59.666577] sp: bf97abf0
[ 59.669459] msr: 2d000
[ 59.672081] current = 0xecd92280
[ 59.675484] pid = 706, comm = Xorg
[ 59.679409] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 59.693335] enter ? for help
[ 59.696221] mon> <no input ...>
[ 61.699511] Oops: Machine check, sig: 7 [#5]
[ 61.720682] PREEMPT Canyonlands
[ 61.740458] Modules linked in:
[ 61.759908] CPU: 0 PID: 706 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 61.784541] task: ecd92280 ti: ee076000 task.ti: ee076000
[ 61.806648] NIP: 1ff96480 LR: 1ff96404 CTR: 1ff964d0
[ 61.828290] REGS: ee077f10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 61.853105] MSR: 0002d000 <CE,EE,PR,ME> CR: 28004262 XER: 00000000
[ 61.876551]
GPR00: 1f45a134 bf97abf0 b7c4a6f0 b740cffc b6c23008 00000780 00000004 00000000
GPR08: 00000000 b740cffc 00000000 bf97aba0 1ff96404 20831ff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20e83650 00000438 b6c23008
GPR24: 00000780 bf97ac48 20e6d760 b740d000 b740d000 b6c23008 2009eff4 00001e00
[ 61.992814] NIP [1ff96480] 0x1ff96480
[ 62.013819] LR [1ff96404] 0x1ff96404
[ 62.034763] Call Trace:
[ 62.054369] ---[ end trace 8fcfa5f0e9942059 ]---
[ 62.058990]
[ 64.797128] Machine check in kernel mode.
[ 64.801162] Data Write PLB Error
[ 64.804390] Machine Check exception is imprecise
[ 64.809014] Vector: 214 at [ecd77f10]
[ 64.812767] pc: 1fcc9484
[ 64.815683] lr: 1fcc9404
[ 64.818600] sp: bfe4cae0
[ 64.821482] msr: 2d000
[ 64.824104] current = 0xece22e00
[ 64.827507] pid = 740, comm = Xorg
[ 64.831432] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 64.845358] enter ? for help
[ 64.848244] mon> <no input ...>
[ 66.851533] Oops: Machine check, sig: 7 [#6]
[ 66.873043] PREEMPT Canyonlands
[ 66.893235] Modules linked in:
[ 66.913138] CPU: 0 PID: 740 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 66.938074] task: ece22e00 ti: ecd76000 task.ti: ecd76000
[ 66.960416] NIP: 1fcc9484 LR: 1fcc9404 CTR: 1fcc94d0
[ 66.982195] REGS: ecd77f10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 67.007263] MSR: 0002d000 <CE,EE,PR,ME> CR: 44004242 XER: 20000000
[ 67.030900]
GPR00: 1f18d134 bfe4cae0 b7bd16f0 b7393ffc b6baa008 00000778 00000004 00000000
GPR08: 00000000 b7393ffc 00000000 bfe4ca90 1fcc9404 20564ff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20805650 00000438 b6baa008
GPR24: 00000780 bfe4cb38 207ef760 b7394000 b7394000 b6baa008 1fdd1ff4 00001e00
[ 67.147248] NIP [1fcc9484] 0x1fcc9484
[ 67.168315] LR [1fcc9404] 0x1fcc9404
[ 67.189241] Call Trace:
[ 67.208910] ---[ end trace 8fcfa5f0e994205a ]---
[ 67.213530]
[ 72.365296] Machine check in kernel mode.
[ 72.369331] Data Write PLB Error
[ 72.372558] Machine Check exception is imprecise
[ 72.377184] Vector: 214 at [ecd6df10]
[ 72.380934] pc: 200d2480
[ 72.383851] lr: 200d2404
[ 72.386768] sp: bfb01b40
[ 72.389651] msr: 2f900
[ 72.392273] current = 0xecd91700
[ 72.395675] pid = 928, comm = Xorg
[ 72.399601] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 72.413527] enter ? for help
[ 72.416412] mon> <no input ...>
[ 74.419702] Oops: Machine check, sig: 7 [#7]
[ 74.441602] PREEMPT Canyonlands
[ 74.462437] Modules linked in:
[ 74.482998] CPU: 0 PID: 928 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 74.508629] task: ecd91700 ti: ecd6c000 task.ti: ecd6c000
[ 74.531717] NIP: 200d2480 LR: 200d2404 CTR: 200d24d0
[ 74.554253] REGS: ecd6df10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 74.579928] MSR: 0002f900 <CE,EE,PR,FP,ME> CR: 24004242 XER: 00000000
[ 74.604398]
GPR00: 1f596134 bfb01b40 b7b706f0 b7332ffc b6b49008 00000780 00000004 00000000
GPR08: 00000000 b7332ffc 00000000 bfb01af0 200d2404 2096dff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 20bd0638 00000438 b6b49008
GPR24: 00000780 bfb01b98 20bba748 b7333000 b7333000 b6b49008 201daff4 00001e00
[ 74.722944] NIP [200d2480] 0x200d2480
[ 74.744287] LR [200d2404] 0x200d2404
[ 74.765543] Call Trace:
[ 74.785568] ---[ end trace 8fcfa5f0e994205b ]---
[ 74.790187]
Ubuntu Xenial Xerus (development branch) Sam460ex ttyS0
Sam460ex login: [ 77.721209] Machine check in kernel mode.
[ 77.725244] Data Write PLB Error
[ 77.728470] Machine Check exception is imprecise
[ 77.733097] Vector: 214 at [ecee9f10]
[ 77.736846] pc: 200a4480
[ 77.739763] lr: 200a4404
[ 77.742680] sp: bff59fc0
[ 77.745563] msr: 2f900
[ 77.748185] current = 0xecd39cc0
[ 77.751588] pid = 951, comm = Xorg
[ 77.755513] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 77.769439] enter ? for help
[ 77.772325] mon> <no input ...>
[ 79.775614] Oops: Machine check, sig: 7 [#8]
[ 79.798478] PREEMPT Canyonlands
[ 79.820832] Modules linked in:
[ 79.843000] CPU: 0 PID: 951 Comm: Xorg Tainted: G D W 4.5.0-rc1-Sam460ex #1
[ 79.870410] task: ecd39cc0 ti: ecee8000 task.ti: ecee8000
[ 79.895399] NIP: 200a4480 LR: 200a4404 CTR: 200a44d0
[ 79.919862] REGS: ecee9f10 TRAP: 0214 Tainted: G D W (4.5.0-rc1-Sam460ex)
[ 79.947506] MSR: 0002f900 <CE,EE,PR,FP,ME> CR: 24004242 XER: 00000000
[ 79.973991]
GPR00: 1f568134 bff59fc0 b78c86f0 b708affc b68a1008 00000780 00000004 00000000
GPR08: 00000000 b708affc 00000000 bff59f70 200a4404 2093fff4 00000000 00000780
GPR16: 00000000 00000020 00000000 00000000 00001e00 209cb638 00000438 b68a1008
GPR24: 00000780 bff5a018 209b5748 b708b000 b708b000 b68a1008 201acff4 00001e00
[ 80.101833] NIP [200a4480] 0x200a4480
[ 80.124931] LR [200a4404] 0x200a4404
[ 80.147819] Call Trace:
[ 80.169301] ---[ end trace 8fcfa5f0e994205c ]---
[ 80.173921]
[ 82.785007] Machine check in kernel mode.
[ 82.789037] Data Write PLB Error
[ 82.792263] Machine Check exception is imprecise
[ 82.796891] Vector: 214 at [ecef1f10]
[ 82.800641] pc: 1fd3b480
[ 82.803556] lr: 1fd3b404
[ 82.806474] sp: bfd64650
[ 82.809356] msr: 2f900
[ 82.811978] current = 0xece20b80
[ 82.815381] pid = 971, comm = Xorg
[ 82.819307] Linux version 4.5.0-rc1-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Jan 25 16:03:17 AST 2016
[ 82.833232] enter ? for help
[ 82.836118] mon> <no input ...>
[-- Attachment #1.2: Type: text/html, Size: 59713 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-01-25 20:35 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-17 23:20 [BUG/REGRESSION] Radeon HDMI casuses oops on Acube Sam460ex amcc 460ex power board Julian Margetson
2015-05-18 16:08 ` Alex Deucher
2015-05-18 17:48 ` Julian Margetson
2015-05-18 20:59 ` Alex Deucher
2015-05-18 22:41 ` Julian Margetson
2015-05-18 23:00 ` Alex Deucher
2015-05-19 0:43 ` Julian Margetson
2015-05-22 11:57 ` Julian Margetson
2015-05-31 11:48 ` Julian Margetson
2015-12-28 15:58 ` [BUG] Radeon TAHITI_vce.bin firmware " Julian Margetson
2016-01-22 0:12 ` [BUG] Radeon TAHITI_vce.bin firmware casuses oops on Acube Sam460ex amcc 460ex and other Power PC motherboards Julian Margetson
2016-01-22 5:15 ` Alex Deucher
2016-01-22 8:17 ` Christian König
2016-01-22 11:06 ` Julian Margetson
2016-01-25 12:46 ` [BUG/REGRESSION] Kernel 4.5-rc1 on Acube Sam460ex AMCC 460ex " Julian Margetson
2016-01-25 19:20 ` Dan Williams
2016-01-25 20:35 ` Julian Margetson [this message]
2016-01-27 1:43 ` Dan Williams
2016-01-27 10:18 ` Julian Margetson
2016-01-27 19:34 ` Dan Williams
2016-01-28 10:41 ` Julian Margetson
2016-01-28 15:47 ` Dan Williams
2016-01-28 18:21 ` Julian Margetson
2016-01-28 18:42 ` Dan Williams
[not found] ` <56A173FA.2090405-zqC88Q5qmK4@public.gmane.org>
2019-01-01 15:03 ` ATI FirePro 2260 doesn't work after the update 'drm-next-2018-12-14' Christian Zigotzky
[not found] ` <845b2222-7014-0211-3246-55d1acc7686b-KCoaydhb8eAb1SvskN2V4Q@public.gmane.org>
2019-01-03 11:03 ` Michel Dänzer
[not found] ` <d62eb7a9-5dd7-8052-6010-63898c51fd05-otUistvHUpPR7s880joybQ@public.gmane.org>
2019-01-03 19:30 ` Christian Zigotzky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A68702.5040909@candw.ms \
--to=runaway@candw.ms \
--cc=aperez@alexperez.com \
--cc=chzigotzky@xenosoft.de \
--cc=dan.j.williams@intel.com \
--cc=dave@sr71.net \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.