From: don fisher <hdf3-Wuw85uim5zDR7s880joybQ@public.gmane.org>
To: "nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org"
<nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: help with signal from monitor
Date: Tue, 26 Jan 2016 16:24:16 -0700 [thread overview]
Message-ID: <56A80020.4070400@comcast.net> (raw)
In-Reply-To: <CAKb7Uvhpki6+d970bxqn+adewDop28t7earM21OGT5h4i8euiQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 893 bytes --]
On 01/26/2016 03:58 PM, Ilia Mirkin wrote:
> On Tue, Jan 26, 2016 at 5:54 PM, don fisher <hdf3-Wuw85uim5zDR7s880joybQ@public.gmane.org> wrote:
>> On 01/26/2016 03:24 PM, Ilia Mirkin wrote:
>>>
>>> sleep 1 && xset dpms force off
>>
>> Could you confirm exactly how to add the drm.debug=0x1e option. Is it
>> another parameter on the kernel command line?
>
> Yep
>
>> Where does the output data go?
>
> dmesg
>
>> Is there a way to get it into a file?
>
> dmesg > somefile
>
> Chances are that your syslog is also set up to read kernel messages
> and store them to some log file.
>
> Cheers,
>
> -ilia
>
Attached is the output from dmesg. I issued the:
sleep 1 && xset dpms force off
command, and the the next dmesg dump included lines after 74.948936. I
then issued the command again and the dump lines repeated as you can see.
Please share you thoughts, and thanks for your help.
Don
[-- Attachment #2: dump.txt --]
[-- Type: text/plain, Size: 7015 bytes --]
[ 39.571818] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[ 39.573152] [drm:drm_mode_getresources] CRTC[0] CONNECTORS[0] ENCODERS[0]
[ 39.573154] [drm:drm_mode_getresources] CRTC[0] CONNECTORS[0] ENCODERS[0]
[ 41.578273] nouveau E[ PGRAPH][0000:07:00.0] HUB_INIT timed out
[ 41.578277] nouveau E[ PGRAPH][0000:07:00.0] 409000 - done 0x00000240
[ 41.578281] nouveau E[ PGRAPH][0000:07:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578285] nouveau E[ PGRAPH][0000:07:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000001
[ 41.578287] nouveau E[ PGRAPH][0000:07:00.0] 502000 - done 0x00000340
[ 41.578293] nouveau E[ PGRAPH][0000:07:00.0] 502000 - stat 0x80000000 0x00008e00 0x00000000 0x00000000
[ 41.578299] nouveau E[ PGRAPH][0000:07:00.0] 502000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
[ 41.578301] nouveau E[ PGRAPH][0000:07:00.0] 50a000 - done 0x00000300
[ 41.578307] nouveau E[ PGRAPH][0000:07:00.0] 50a000 - stat 0x00000000 0x00011a00 0x00000000 0x00000000
[ 41.578313] nouveau E[ PGRAPH][0000:07:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578315] nouveau E[ PGRAPH][0000:07:00.0] 512000 - done 0x00000300
[ 41.578321] nouveau E[ PGRAPH][0000:07:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578326] nouveau E[ PGRAPH][0000:07:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578329] nouveau E[ PGRAPH][0000:07:00.0] 51a000 - done 0x00000300
[ 41.578334] nouveau E[ PGRAPH][0000:07:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578340] nouveau E[ PGRAPH][0000:07:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 41.578341] nouveau E[ PGRAPH][0000:07:00.0] init failed, -16
[ 43.580252] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
[ 43.580257] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000220
[ 43.580261] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580266] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000000
[ 43.580268] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000300
[ 43.580274] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00008c00 0x00000000 0x00000000
[ 43.580280] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580283] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - done 0x00000300
[ 43.580289] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580295] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580297] nouveau E[ PGRAPH][0000:01:00.0] 512000 - done 0x00000300
[ 43.580303] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580309] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580312] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - done 0x00000300
[ 43.580317] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580323] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 43.580325] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
[ 43.610207] [drm:drm_mode_addfb] [FB:46]
[ 43.610221] [drm:drm_mode_setcrtc] [CRTC:15]
[ 43.610224] [drm:drm_mode_setcrtc] [CONNECTOR:22:LVDS-1]
[ 43.610225] [drm:drm_crtc_helper_set_config]
[ 43.610226] [drm:drm_crtc_helper_set_config] [CRTC:15] [FB:46] #connectors=1 (x y) (0 0)
[ 43.610230] [drm:drm_crtc_helper_set_config] [CONNECTOR:22:LVDS-1] to [CRTC:15]
[ 43.610231] [drm:drm_crtc_helper_set_config] [CONNECTOR:29:HDMI-A-2] to [CRTC:17]
[ 43.633784] [drm:drm_mode_setcrtc] [CRTC:17]
[ 43.633786] [drm:drm_mode_setcrtc] [CONNECTOR:29:HDMI-A-2]
[ 43.633786] [drm:drm_crtc_helper_set_config]
[ 43.633787] [drm:drm_crtc_helper_set_config] [CRTC:17] [FB:46] #connectors=1 (x y) (0 0)
[ 43.633788] [drm:drm_crtc_helper_set_config] modes are different, full mode set
[ 43.633790] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 43.633791] [drm:drm_mode_debug_printmodeline] Modeline 76:"" 0 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x0 0x5
[ 43.633792] [drm:drm_crtc_helper_set_config] [CONNECTOR:22:LVDS-1] to [CRTC:15]
[ 43.633793] [drm:drm_crtc_helper_set_config] [CONNECTOR:29:HDMI-A-2] to [CRTC:17]
[ 43.633793] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace
[ 43.633794] [drm:drm_mode_debug_printmodeline] Modeline 76:"" 0 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x0 0x5
[ 43.633796] [drm:drm_crtc_helper_set_mode] [CRTC:17]
[ 43.643737] [drm:drm_crtc_helper_set_mode] [ENCODER:30:TMDS-30] set [MODE:76:]
[ 43.643749] [drm:drm_detect_monitor_audio] Monitor has basic audio support
[ 43.643751] [drm:drm_edid_to_eld] ELD monitor ASUS VN289
[ 43.643752] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
[ 43.643753] [drm:drm_edid_to_eld] ELD size 9, SAD count 1
[ 43.660384] [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on
[ 43.660385] [drm:drm_crtc_helper_set_config] [CONNECTOR:29:HDMI-A-2] set DPMS on
[ 74.948936] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 144.759560] [drm:drm_helper_hpd_irq_event] [CONNECTOR:24:DP-1] status updated from disconnected to disconnected
[ 144.791556] [drm:drm_helper_hpd_irq_event] [CONNECTOR:27:HDMI-A-1] status updated from disconnected to disconnected
[ 144.851440] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:HDMI-A-2] status updated from connected to connected
[ 145.165551] [drm:drm_helper_hpd_irq_event] [CONNECTOR:24:DP-1] status updated from disconnected to disconnected
[ 145.197548] [drm:drm_helper_hpd_irq_event] [CONNECTOR:27:HDMI-A-1] status updated from disconnected to disconnected
[ 145.257607] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:HDMI-A-2] status updated from connected to connected
[ 269.923468] fuse init (API version 7.23)
[ 468.372242] [drm:drm_helper_hpd_irq_event] [CONNECTOR:24:DP-1] status updated from disconnected to disconnected
[ 468.404238] [drm:drm_helper_hpd_irq_event] [CONNECTOR:27:HDMI-A-1] status updated from disconnected to disconnected
[ 468.464232] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:HDMI-A-2] status updated from connected to connected
[ 468.778233] [drm:drm_helper_hpd_irq_event] [CONNECTOR:24:DP-1] status updated from disconnected to disconnected
[ 468.810229] [drm:drm_helper_hpd_irq_event] [CONNECTOR:27:HDMI-A-1] status updated from disconnected to disconnected
[ 468.870163] [drm:drm_helper_hpd_irq_event] [CONNECTOR:29:HDMI-A-2] status updated from connected to connected
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2016-01-26 23:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-26 21:26 help with signal from monitor don fisher
[not found] ` <56A7E475.5080307-Wuw85uim5zDR7s880joybQ@public.gmane.org>
2016-01-26 21:40 ` Ilia Mirkin
[not found] ` <CAKb7UvjU+XcjaJaQQia44rHHNBOGK42iH0Fzzf4j5PJ8bX_5RQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-26 22:19 ` don fisher
[not found] ` <56A7F0EA.2040104-Wuw85uim5zDR7s880joybQ@public.gmane.org>
2016-01-26 22:24 ` Ilia Mirkin
[not found] ` <CAKb7UvjkFSGz7_UG4uPG1muHK-EATBVUvFckzbFHd+3PR3JVYw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-26 22:54 ` don fisher
[not found] ` <56A7F935.1040906-Wuw85uim5zDR7s880joybQ@public.gmane.org>
2016-01-26 22:58 ` Ilia Mirkin
[not found] ` <CAKb7Uvhpki6+d970bxqn+adewDop28t7earM21OGT5h4i8euiQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-26 23:24 ` don fisher [this message]
[not found] ` <56A80020.4070400-Wuw85uim5zDR7s880joybQ@public.gmane.org>
2016-01-26 23:31 ` Ilia Mirkin
[not found] ` <CAKb7UvhnfnUJ2Zbsd8_6xi4VM3g6_pVvk_Xc5G29ntpk=QXaXA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-01-26 23:47 ` don fisher
2016-01-27 2:22 ` don fisher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A80020.4070400@comcast.net \
--to=hdf3-wuw85uim5zdr7s880joybq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.