[U-Boot] [PATCH] imx: MX6DQ{P}/DL:SABRESD Fix bmode eMMC failure

[Stefano Babic <sbabic@denx.de>]

On 29/01/2016 03:39, Peng Fan wrote:
> From: Ye Li <ye.li@nxp.com>
> 
> The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card.
> Fixed the value to correct one.
> 
> The issue was fixed in 2014.04 u-boot, but that patch seems missed during porting
> to 2015.04.
> 
> Signed-off-by: Ye Li <ye.li@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  board/freescale/mx6sabresd/mx6sabresd.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
> index d20953d..42f89ab 100644
> --- a/board/freescale/mx6sabresd/mx6sabresd.c
> +++ b/board/freescale/mx6sabresd/mx6sabresd.c
> @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = {
>  	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
>  	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
>  	/* 8 bit bus width */
> -	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
> +	{"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
>  	{NULL,	 0},
>  };
>  #endif
> 

Reviewed-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================