From: Purna Chandra Mandal <purna.mandal@microchip.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 08/13] board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
Date: Mon, 1 Feb 2016 13:47:31 +0530 [thread overview]
Message-ID: <56AF149B.8090703@microchip.com> (raw)
In-Reply-To: <56AB814B.6050406@gmail.com>
On 01/29/2016 08:42 PM, Daniel Schwierzeck wrote:
>
> Am 28.01.2016 um 11:00 schrieb Purna Chandra Mandal:
>> This adds support for Microchip PIC32MZ[DA] StarterKit board
>> based on a PIC32MZ[DA] family of microcontroller.
>>
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Thanks Daniel.
Could you please apply these patches in your tree?
>>
>> ---
>>
>> Changes in v4:
>> - create defconfig by 'make savedefconfig'
>> - drop explicit SYS_BAUDRATE_TABLE in favor of default one
>>
>> Changes in v3:
>> - drop SKIP_LOWLEVEL_INIT, GBL_DATA_OFFSET from config header
>> - move CMD_MEMTEST, CMD_MEMINFO to defconfig
>> - increase SYS_MALLOC_F_LEN to 0x600
>> - use auto-generated defconfig - no hand edit
>>
>> Changes in v2:
>> - move CONFIG_SYS_TEXT_BASE (from board/*/config.mk) to include/configs/<board>.h
>>
>> arch/mips/dts/Makefile | 2 +-
>> arch/mips/dts/pic32mzda_sk.dts | 38 ++++++++++++++
>> arch/mips/mach-pic32/Kconfig | 13 +++++
>> board/microchip/pic32mzda/Kconfig | 13 +++++
>> board/microchip/pic32mzda/MAINTAINERS | 6 +++
>> board/microchip/pic32mzda/Makefile | 7 +++
>> board/microchip/pic32mzda/README | 22 +++++++++
>> board/microchip/pic32mzda/pic32mzda.c | 31 ++++++++++++
>> configs/pic32mzdask_defconfig | 30 +++++++++++
>> include/configs/pic32mzdask.h | 93 +++++++++++++++++++++++++++++++++++
>> 10 files changed, 254 insertions(+), 1 deletion(-)
>> create mode 100644 arch/mips/dts/pic32mzda_sk.dts
>> create mode 100644 board/microchip/pic32mzda/Kconfig
>> create mode 100644 board/microchip/pic32mzda/MAINTAINERS
>> create mode 100644 board/microchip/pic32mzda/Makefile
>> create mode 100644 board/microchip/pic32mzda/README
>> create mode 100644 board/microchip/pic32mzda/pic32mzda.c
>> create mode 100644 configs/pic32mzdask_defconfig
>> create mode 100644 include/configs/pic32mzdask.h
>>
>> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
>> index 47b6eb5..b513918 100644
>> --- a/arch/mips/dts/Makefile
>> +++ b/arch/mips/dts/Makefile
>> @@ -2,7 +2,7 @@
>> # SPDX-License-Identifier: GPL-2.0+
>> #
>>
>> -dtb-y +=
>> +dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
>>
>> targets += $(dtb-y)
>>
>> diff --git a/arch/mips/dts/pic32mzda_sk.dts b/arch/mips/dts/pic32mzda_sk.dts
>> new file mode 100644
>> index 0000000..99e7f64
>> --- /dev/null
>> +++ b/arch/mips/dts/pic32mzda_sk.dts
>> @@ -0,0 +1,38 @@
>> +/*
>> + * Copyright (C) 2015 Purna Chandra Mandal, purna.mandal at microchip.com
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "pic32mzda.dtsi"
>> +
>> +/ {
>> + model = "Microchip PIC32MZDASK";
>> + compatible = "microchip,pic32mzdask", "microchip,pic32mzda";
>> +
>> + aliases {
>> + console = &uart2;
>> + serial0 = &uart2;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&clock {
>> + status = "okay";
>> + u-boot,dm-pre-reloc;
>> +};
>> +
>> +&pinctrl {
>> + status = "okay";
>> + u-boot,dm-pre-reloc;
>> +};
>> +
>> +&uart2 {
>> + status = "okay";
>> + u-boot,dm-pre-reloc;
>> +};
>> diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig
>> index f636266..2e38bb7 100644
>> --- a/arch/mips/mach-pic32/Kconfig
>> +++ b/arch/mips/mach-pic32/Kconfig
>> @@ -19,4 +19,17 @@ config SOC_PIC32MZDA
>>
>> endchoice
>>
>> +choice
>> + prompt "Board select"
>> +
>> +config TARGET_PIC32MZDASK
>> + bool "Microchip PIC32MZ[DA] Starter Kit"
>> + depends on SOC_PIC32MZDA
>> + help
>> + This supports Microchip PIC32MZ[DA] Starter Kit.
>> +
>> +endchoice
>> +
>> +source "board/microchip/pic32mzda/Kconfig"
>> +
>> endmenu
>> diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig
>> new file mode 100644
>> index 0000000..8acb393
>> --- /dev/null
>> +++ b/board/microchip/pic32mzda/Kconfig
>> @@ -0,0 +1,13 @@
>> +
>> +if TARGET_PIC32MZDASK
>> +
>> +config SYS_BOARD
>> + default "pic32mzda"
>> +
>> +config SYS_VENDOR
>> + default "microchip"
>> +
>> +config SYS_CONFIG_NAME
>> + default "pic32mzdask"
>> +
>> +endif
>> diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS
>> new file mode 100644
>> index 0000000..c934f1a
>> --- /dev/null
>> +++ b/board/microchip/pic32mzda/MAINTAINERS
>> @@ -0,0 +1,6 @@
>> +PIC32MZDASK BOARD
>> +M: Purna Chandra Mandal <purna.mandal@microchip.com>
>> +S: Maintained
>> +F: board/microchip/pic32mzda/
>> +F: include/configs/pic32mzdask.h
>> +F: configs/pic32mzdask_defconfig
>> diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile
>> new file mode 100644
>> index 0000000..3629530
>> --- /dev/null
>> +++ b/board/microchip/pic32mzda/Makefile
>> @@ -0,0 +1,7 @@
>> +#
>> +# (C) Copyright 2015
>> +# Purna Chandra Mandal, purna.mandal at microchip.com.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +obj-y := pic32mzda.o
>> diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README
>> new file mode 100644
>> index 0000000..91d16ab
>> --- /dev/null
>> +++ b/board/microchip/pic32mzda/README
>> @@ -0,0 +1,22 @@
>> +/*
>> + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
>> + */
>> +
>> +PIC32MZ[DA] Starter Kit
>> +----------------------------------------
>> +PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
>> +This family is powered by MIPS M14KEC 32bit general purpose core and has
>> +advanced microcontroller features and peripherals.
>> +
>> +This processor boots with proprietary stage1 bootloader running from internal
>> +boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
>> +on internal program-flash. Finally U-Boot loads OS image (along with other
>> +required files for booting) from either uSD card, or ethernet, or from USB
>> +storage.
>> +
>> +To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
>> +environment file), uImage, *.dtb (platform device-tree-blob file).
>> +
>> +U-Boot jumps to Linux using UHI specification.
>> +
>> +Visit http://microchip.com for details.
>> diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c
>> new file mode 100644
>> index 0000000..afe2ab8
>> --- /dev/null
>> +++ b/board/microchip/pic32mzda/pic32mzda.c
>> @@ -0,0 +1,31 @@
>> +/*
>> + * Microchip PIC32MZ[DA] Starter Kit board
>> + *
>> + * Copyright (C) 2015, Microchip Technology Inc.
>> + * Purna Chandra Mandal <purna.mandal@microchip.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + *
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <clk.h>
>> +#include <mach/pic32.h>
>> +
>> +#ifdef CONFIG_DISPLAY_BOARDINFO
>> +int checkboard(void)
>> +{
>> + ulong rate = 0;
>> + struct udevice *dev;
>> +
>> + printf("Core: %s\n", get_core_name());
>> +
>> + if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
>> + rate = clk_get_rate(dev);
>> + printf("CPU Speed: %lu MHz\n", rate / 1000000);
>> + }
>> +
>> + return 0;
>> +}
>> +#endif
>> diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig
>> new file mode 100644
>> index 0000000..1c968fc
>> --- /dev/null
>> +++ b/configs/pic32mzdask_defconfig
>> @@ -0,0 +1,30 @@
>> +CONFIG_MIPS=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x600
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_MACH_PIC32=y
>> +# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
>> +CONFIG_MIPS_BOOT_FDT=y
>> +CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_SYS_PROMPT="dask # "
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_EXPORTENV is not set
>> +# CONFIG_CMD_SAVEENV is not set
>> +CONFIG_LOOPW=y
>> +CONFIG_CMD_MEMTEST=y
>> +CONFIG_CMD_MEMINFO=y
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_CMD_FPGA is not set
>> +CONFIG_CMD_GPIO=y
>> +# CONFIG_CMD_NET is not set
>> +# CONFIG_CMD_NFS is not set
>> +CONFIG_CMD_TIME=y
>> +CONFIG_OF_EMBED=y
>> +CONFIG_CLK=y
>> +CONFIG_PINCTRL=y
>> +# CONFIG_PINCTRL_FULL is not set
>> +CONFIG_SYS_VSNPRINTF=y
>> +CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_REGEX=y
>> +CONFIG_CMD_DHRYSTONE=y
>> diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
>> new file mode 100644
>> index 0000000..5ba2a19
>> --- /dev/null
>> +++ b/include/configs/pic32mzdask.h
>> @@ -0,0 +1,93 @@
>> +/*
>> + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + *
>> + * Microchip PIC32MZ[DA] Starter Kit.
>> + */
>> +
>> +#ifndef __PIC32MZDASK_CONFIG_H
>> +#define __PIC32MZDASK_CONFIG_H
>> +
>> +/* System Configuration */
>> +#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */
>> +#define CONFIG_DISPLAY_BOARDINFO
>> +
>> +/*--------------------------------------------
>> + * CPU configuration
>> + */
>> +/* CPU Timer rate */
>> +#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000
>> +
>> +/* Cache Configuration */
>> +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
>> +
>> +/*----------------------------------------------------------------------
>> + * Memory Layout
>> + */
>> +#define CONFIG_SYS_SRAM_BASE 0x80000000
>> +#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */
>> +
>> +/* Initial RAM for temporary stack, global data */
>> +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
>> +#define CONFIG_SYS_INIT_RAM_ADDR \
>> + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE)
>> +#define CONFIG_SYS_INIT_SP_ADDR \
>> + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
>> +
>> +/* SDRAM Configuration (for final code, data, stack, heap) */
>> +#define CONFIG_SYS_SDRAM_BASE 0x88000000
>> +#define CONFIG_SYS_MALLOC_LEN (256 << 10)
>> +#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10)
>> +#define CONFIG_STACKSIZE (4 << 10) /* regular stack */
>> +
>> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
>> +#define CONFIG_SYS_MONITOR_LEN (192 << 10)
>> +
>> +#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */
>> +#define CONFIG_SYS_ENV_ADDR 0x88300000
>> +
>> +/* Memory Test */
>> +#define CONFIG_SYS_MEMTEST_START 0x88000000
>> +#define CONFIG_SYS_MEMTEST_END 0x88080000
>> +
>> +/*----------------------------------------------------------------------
>> + * Commands
>> + */
>> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
>> +#define CONFIG_CMD_CLK
>> +
>> +/*-------------------------------------------------
>> + * FLASH configuration
>> + */
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +/*------------------------------------------------------------
>> + * Console Configuration
>> + */
>> +#define CONFIG_BAUDRATE 115200
>> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
>> +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
>> +#define CONFIG_SYS_PBSIZE \
>> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_CMDLINE_EDITING 1
>> +
>> +/*
>> + * Handover flattened device tree (dtb file) to Linux kernel
>> + */
>> +#define CONFIG_OF_LIBFDT 1
>> +
>> +/* -------------------------------------------------
>> + * Environment
>> + */
>> +#define CONFIG_ENV_IS_NOWHERE 1
>> +#define CONFIG_ENV_SIZE 0x4000
>> +
>> +/* ---------------------------------------------------------------------
>> + * Board boot configuration
>> + */
>> +#define CONFIG_TIMESTAMP /* Print image info with timestamp */
>> +#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */
>> +#undef CONFIG_BOOTARGS
>> +
>> +#endif /* __PIC32MZDASK_CONFIG_H */
>>
next prev parent reply other threads:[~2016-02-01 8:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 10:00 [U-Boot] [PATCH v4 00/13] Initial Microchip PIC32MZ[DA] Support Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 01/13] MIPS: initial infrastructure for Microchip PIC32 architecture Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 02/13] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 03/13] drivers: pinctrl: Add pinctrl driver for Microchip PIC32 Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 04/13] drivers: gpio: add driver for Microchip PIC32 GPIO controller Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 05/13] drivers: serial: add driver for Microchip PIC32 UART controller Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 06/13] drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32 Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 07/13] MIPS: Add support for Microchip PIC32MZ[DA] SoC family Purna Chandra Mandal
2016-01-29 15:10 ` Daniel Schwierzeck
2016-01-28 10:00 ` [U-Boot] [PATCH v4 08/13] board: Add Microchip PIC32MZ[DA]-Starter-Kit board Purna Chandra Mandal
2016-01-29 15:12 ` Daniel Schwierzeck
2016-02-01 8:17 ` Purna Chandra Mandal [this message]
2016-01-28 10:00 ` [U-Boot] [PATCH v4 09/13] drivers: mmc: add driver for Microchip PIC32 SDHCI controller Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 10/13] board: add SDHCI support for PIC32MZDASK board Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 11/13] drivers: net: phy: add SMSC LAN8740 Phy support Purna Chandra Mandal
2016-01-28 15:09 ` Joe Hershberger
2016-01-28 10:00 ` [U-Boot] [PATCH v4 12/13] drivers: net: Add ethernet driver for Microchip PIC32 Purna Chandra Mandal
2016-01-28 10:00 ` [U-Boot] [PATCH v4 13/13] board: Enable ethernet, tftpboot support to pic32mzdask board Purna Chandra Mandal
2016-02-01 21:34 ` [U-Boot] [PATCH v4 00/13] Initial Microchip PIC32MZ[DA] Support Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56AF149B.8090703@microchip.com \
--to=purna.mandal@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.