From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT
Date: Tue, 2 Feb 2016 21:37:31 +0100 [thread overview]
Message-ID: <56B1138B.1020700@denx.de> (raw)
In-Reply-To: <1453870913-12028-1-git-send-email-bhuvanchandra.dv@toradex.com>
On 27/01/2016 06:01, Bhuvanchandra DV wrote:
> Changes since v3:
> - Add missing space in device tree.
> - Reorder the patchset to avoid broken state.
>
> Changes since v2:
> - Split the patch for updating the license string.
> - Reorder the patchset to avoid broken state.
>
> Changes since v1:
> - Update the license string in device tree's.
> - Update all lpuart's uart nodes in device tree.
> - Dropped *_dtb_defconfig and updated the default defconfig's with DT support.
> - Reordered defconfig's using defconfig via savedefconfig.
> - Use one patch to update all Vybrid based board defconfig's.
> - Dropped vybrid_gpio driver legacy code. Thanks! Stefan for pointing this.
> - Dropped the legacy way of enabling GPIO, UART and SPI on NXP/Freescale Vybrid
> based board's.
>
> - Compile checked for vf610twr and pcm052 since I don't have access
> to such hardware at my end. Reviewer's and tester's welcome!
>
> Bhuvanchandra DV (9):
> arm: vybrid: Enable lpuart support
> arm: vybrid: Update the license string
> arm: colibri-vf: Enable serial support
> arm: vf610-twr: Add device tree file's
> arm: pcm052: Add device tree file's
> arm: vybrid: Update defconfig's
> arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
> dm: lpuart: Drop the legacy code
> dm: vybrid_gpio: Drop legacy code
>
> arch/arm/dts/Makefile | 4 +-
> arch/arm/dts/pcm052.dts | 22 +++++++++
> arch/arm/dts/vf-colibri.dtsi | 15 ++++--
> arch/arm/dts/vf.dtsi | 48 +++++++++++++++++--
> arch/arm/dts/vf500-colibri.dts | 5 --
> arch/arm/dts/vf610-colibri.dts | 5 --
> arch/arm/dts/vf610-twr.dts | 22 +++++++++
> configs/colibri_vf_defconfig | 8 ++++
> configs/colibri_vf_dtb_defconfig | 14 ------
> configs/pcm052_defconfig | 7 +++
> configs/vf610twr_defconfig | 7 +++
> configs/vf610twr_nand_defconfig | 7 +++
> drivers/gpio/vybrid_gpio.c | 18 -------
> drivers/serial/serial_lpuart.c | 101 +--------------------------------------
> include/configs/colibri_vf.h | 13 -----
> include/configs/pcm052.h | 3 --
> include/configs/vf610twr.h | 3 --
> 17 files changed, 131 insertions(+), 171 deletions(-)
> create mode 100644 arch/arm/dts/pcm052.dts
> create mode 100644 arch/arm/dts/vf610-twr.dts
> delete mode 100644 configs/colibri_vf_dtb_defconfig
>
Whole series applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
prev parent reply other threads:[~2016-02-02 20:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 5:01 [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 1/9] arm: vybrid: Enable lpuart support Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 2/9] arm: vybrid: Update the license string Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 3/9] arm: colibri-vf: Enable serial support Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 4/9] arm: vf610-twr: Add device tree file's Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 5/9] arm: pcm052: " Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 6/9] arm: vybrid: Update defconfig's Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 7/9] arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 8/9] dm: lpuart: Drop the legacy code Bhuvanchandra DV
2016-01-27 5:01 ` [U-Boot] [PATCHv4 9/9] dm: vybrid_gpio: Drop " Bhuvanchandra DV
2016-02-02 10:36 ` [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT Bhuvanchandra DV
2016-02-02 20:37 ` Stefano Babic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B1138B.1020700@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.