From: Bart Van Assche <bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
To: Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>,
Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
"linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v3 07/21] IB/srpt: Use scsilun_to_int()
Date: Thu, 4 Feb 2016 14:48:57 -0800 [thread overview]
Message-ID: <56B3D559.6080906@sandisk.com> (raw)
In-Reply-To: <56B3D453.7030409-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
Just like other target drivers, use scsilun_to_int() to unpack SCSI
LUN numbers. This patch only changes the behavior of ib_srpt for LUN
numbers >= 16384.
Signed-off-by: Bart Van Assche <bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
Reviewed-by: Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 92 +++--------------------------------
1 file changed, 7 insertions(+), 85 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index c50f05c..0128040 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1494,80 +1494,6 @@ static int srpt_build_tskmgmt_rsp(struct srpt_rdma_ch *ch,
return resp_len;
}
-#define NO_SUCH_LUN ((uint64_t)-1LL)
-
-/*
- * SCSI LUN addressing method. See also SAM-2 and the section about
- * eight byte LUNs.
- */
-enum scsi_lun_addr_method {
- SCSI_LUN_ADDR_METHOD_PERIPHERAL = 0,
- SCSI_LUN_ADDR_METHOD_FLAT = 1,
- SCSI_LUN_ADDR_METHOD_LUN = 2,
- SCSI_LUN_ADDR_METHOD_EXTENDED_LUN = 3,
-};
-
-/*
- * srpt_unpack_lun() - Convert from network LUN to linear LUN.
- *
- * Convert an 2-byte, 4-byte, 6-byte or 8-byte LUN structure in network byte
- * order (big endian) to a linear LUN. Supports three LUN addressing methods:
- * peripheral, flat and logical unit. See also SAM-2, section 4.9.4 (page 40).
- */
-static uint64_t srpt_unpack_lun(const uint8_t *lun, int len)
-{
- uint64_t res = NO_SUCH_LUN;
- int addressing_method;
-
- if (unlikely(len < 2)) {
- pr_err("Illegal LUN length %d, expected 2 bytes or more\n",
- len);
- goto out;
- }
-
- switch (len) {
- case 8:
- if ((*((__be64 *)lun) &
- cpu_to_be64(0x0000FFFFFFFFFFFFLL)) != 0)
- goto out_err;
- break;
- case 4:
- if (*((__be16 *)&lun[2]) != 0)
- goto out_err;
- break;
- case 6:
- if (*((__be32 *)&lun[2]) != 0)
- goto out_err;
- break;
- case 2:
- break;
- default:
- goto out_err;
- }
-
- addressing_method = (*lun) >> 6; /* highest two bits of byte 0 */
- switch (addressing_method) {
- case SCSI_LUN_ADDR_METHOD_PERIPHERAL:
- case SCSI_LUN_ADDR_METHOD_FLAT:
- case SCSI_LUN_ADDR_METHOD_LUN:
- res = *(lun + 1) | (((*lun) & 0x3f) << 8);
- break;
-
- case SCSI_LUN_ADDR_METHOD_EXTENDED_LUN:
- default:
- pr_err("Unimplemented LUN addressing method %u\n",
- addressing_method);
- break;
- }
-
-out:
- return res;
-
-out_err:
- pr_err("Support for multi-level LUNs has not yet been implemented\n");
- goto out;
-}
-
static int srpt_check_stop_free(struct se_cmd *cmd)
{
struct srpt_send_ioctx *ioctx = container_of(cmd,
@@ -1585,7 +1511,6 @@ static int srpt_handle_cmd(struct srpt_rdma_ch *ch,
{
struct se_cmd *cmd;
struct srp_cmd *srp_cmd;
- uint64_t unpacked_lun;
u64 data_len;
enum dma_data_direction dir;
sense_reason_t ret;
@@ -1620,11 +1545,10 @@ static int srpt_handle_cmd(struct srpt_rdma_ch *ch,
goto send_sense;
}
- unpacked_lun = srpt_unpack_lun((uint8_t *)&srp_cmd->lun,
- sizeof(srp_cmd->lun));
rc = target_submit_cmd(cmd, ch->sess, srp_cmd->cdb,
- &send_ioctx->sense_data[0], unpacked_lun, data_len,
- TCM_SIMPLE_TAG, dir, TARGET_SCF_ACK_KREF);
+ &send_ioctx->sense_data[0],
+ scsilun_to_int(&srp_cmd->lun), data_len,
+ TCM_SIMPLE_TAG, dir, TARGET_SCF_ACK_KREF);
if (rc != 0) {
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto send_sense;
@@ -1669,7 +1593,6 @@ static void srpt_handle_tsk_mgmt(struct srpt_rdma_ch *ch,
struct srp_tsk_mgmt *srp_tsk;
struct se_cmd *cmd;
struct se_session *sess = ch->sess;
- uint64_t unpacked_lun;
int tcm_tmr;
int rc;
@@ -1685,11 +1608,10 @@ static void srpt_handle_tsk_mgmt(struct srpt_rdma_ch *ch,
srpt_set_cmd_state(send_ioctx, SRPT_STATE_MGMT);
send_ioctx->cmd.tag = srp_tsk->tag;
tcm_tmr = srp_tmr_to_tcm(srp_tsk->tsk_mgmt_func);
- unpacked_lun = srpt_unpack_lun((uint8_t *)&srp_tsk->lun,
- sizeof(srp_tsk->lun));
- rc = target_submit_tmr(&send_ioctx->cmd, sess, NULL, unpacked_lun,
- srp_tsk, tcm_tmr, GFP_KERNEL, srp_tsk->task_tag,
- TARGET_SCF_ACK_KREF);
+ rc = target_submit_tmr(&send_ioctx->cmd, sess, NULL,
+ scsilun_to_int(&srp_tsk->lun), srp_tsk, tcm_tmr,
+ GFP_KERNEL, srp_tsk->task_tag,
+ TARGET_SCF_ACK_KREF);
if (rc != 0) {
send_ioctx->cmd.se_tmr_req->response = TMR_FUNCTION_REJECTED;
goto fail;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-04 22:48 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 22:44 [PATCH v3 00/21] IB/srpt patches for Linux kernel v4.6 Bart Van Assche
[not found] ` <56B3D453.7030409-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-02-04 22:45 ` [PATCH v3 01/21] IB/srpt: Simplify srpt_handle_tsk_mgmt() Bart Van Assche
2016-02-04 22:46 ` [PATCH v3 02/21] IB/srpt: Add parentheses around sizeof argument Bart Van Assche
2016-02-04 22:46 ` [PATCH v3 03/21] IB/srpt: Remove struct srpt_node_acl Bart Van Assche
[not found] ` <56B3D4D7.8060800-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-02-09 13:15 ` Christoph Hellwig
[not found] ` <20160209131507.GA25849-jcswGhMUV9g@public.gmane.org>
2016-02-09 15:03 ` Bart Van Assche
[not found] ` <56B9FFD8.2040809-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-02-09 15:08 ` Christoph Hellwig
[not found] ` <20160209150854.GA27614-jcswGhMUV9g@public.gmane.org>
2016-02-09 15:13 ` Bart Van Assche
2016-02-04 22:47 ` [PATCH v3 04/21] IB/srpt: Inline srpt_sdev_name() Bart Van Assche
2016-02-04 22:47 ` [PATCH v3 05/21] IB/srpt: Inline srpt_get_ch_state() Bart Van Assche
2016-02-04 22:48 ` [PATCH v3 06/21] IB/srpt: Introduce target_reverse_dma_direction() Bart Van Assche
2016-02-04 22:48 ` Bart Van Assche [this message]
2016-02-04 22:49 ` [PATCH v3 08/21] IB/srpt: Simplify channel state management Bart Van Assche
2016-02-04 22:49 ` [PATCH v3 09/21] IB/srpt: Simplify srpt_shutdown_session() Bart Van Assche
2016-02-04 22:50 ` [PATCH v3 10/21] IB/srpt: Fix srpt_close_session() Bart Van Assche
2016-02-04 22:51 ` [PATCH v3 11/21] IB/srpt: Fix srpt_handle_cmd() error paths Bart Van Assche
2016-02-04 22:52 ` [PATCH v3 12/21] IB/srpt: Fix how aborted commands are processed Bart Van Assche
2016-02-04 22:55 ` [PATCH v3 13/21] IB/srpt: Inline trivial CM callback functions Bart Van Assche
2016-02-04 22:56 ` [PATCH v3 14/21] IB/srpt: Eliminate srpt_find_channel() Bart Van Assche
2016-02-04 22:57 ` [PATCH v3 15/21] IB/srpt: Log private data associated with REJ Bart Van Assche
2016-02-04 22:57 ` [PATCH v3 16/21] IB/srpt: Use a mutex to protect the channel list Bart Van Assche
[not found] ` <56B3D75B.3030202-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2016-02-09 13:16 ` Christoph Hellwig
2016-02-04 22:57 ` [PATCH v3 17/21] IB/srpt: Detect session shutdown reliably Bart Van Assche
2016-02-04 22:58 ` [PATCH v3 18/21] IB/srpt: Fix srpt_write_pending() Bart Van Assche
2016-02-04 22:58 ` [PATCH v3 19/21] IB/srpt: Log out all initiators if a port is disabled Bart Van Assche
2016-02-04 22:59 ` [PATCH v3 20/21] IB/srpt: Introduce srpt_process_wait_list() Bart Van Assche
2016-02-04 22:59 ` [PATCH v3 21/21] IB/srpt: Fix wait list processing Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B3D559.6080906@sandisk.com \
--to=bart.vanassche-xdaiopvojttbdgjk7y7tuq@public.gmane.org \
--cc=alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=hch-jcswGhMUV9g@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.