From: Guenter Roeck <linux@roeck-us.net>
To: Rob Kramer <rob@solution-space.com>, Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: Re: [PATCH] watchdog: w83627hf: Added NCT6102D support.
Date: Sat, 6 Feb 2016 09:10:35 -0800 [thread overview]
Message-ID: <56B6290B.6010904@roeck-us.net> (raw)
In-Reply-To: <56B40FCD.1010802@solution-space.com>
On 02/04/2016 06:58 PM, Rob Kramer wrote:
> As used in (and tested on) the ASRock IMB-150 board. Implementation is
> identical to other NCT chips, just with different registers.
>
> Signed-off-by: Rob Kramer <rob@solution-space.com>
Rob,
your patch is whitespace damaged (tabs replaced with spaces) and can not be applied.
Please resend.
Thanks,
Guenter
> ---
> drivers/watchdog/Kconfig | 1 +
> drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 4f0e7be..318d8bc 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1140,6 +1140,7 @@ config W83627HF_WDT
> NCT6779
> NCT6791
> NCT6792
> + NCT6102D/04D/06D
>
> This watchdog simply watches your kernel to make sure it doesn't
> freeze, and if it does, it reboots your computer after a certain
> diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
> index cab14bc..09e8003 100644
> --- a/drivers/watchdog/w83627hf_wdt.c
> +++ b/drivers/watchdog/w83627hf_wdt.c
> @@ -45,10 +45,11 @@
> static int wdt_io;
> static int cr_wdt_timeout; /* WDT timeout register */
> static int cr_wdt_control; /* WDT control register */
> +static int cr_wdt_csr; /* WDT control & status register */
>
> enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
> w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
> - w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
> + w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
>
> static int timeout; /* in seconds */
> module_param(timeout, int, 0);
> @@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
> #define W83667HG_B_ID 0xb3
> #define NCT6775_ID 0xb4
> #define NCT6776_ID 0xc3
> +#define NCT6102_ID 0xc4
> #define NCT6779_ID 0xc5
> #define NCT6791_ID 0xc8
> #define NCT6792_ID 0xc9
>
> #define W83627HF_WDT_TIMEOUT 0xf6
> #define W83697HF_WDT_TIMEOUT 0xf4
> +#define NCT6102D_WDT_TIMEOUT 0xf1
>
> #define W83627HF_WDT_CONTROL 0xf5
> #define W83697HF_WDT_CONTROL 0xf3
> +#define NCT6102D_WDT_CONTROL 0xf0
> +
> +#define W836X7HF_WDT_CSR 0xf7
> +#define NCT6102D_WDT_CSR 0xf2
>
> static void superio_outb(int reg, int val)
> {
> @@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> case nct6779:
> case nct6791:
> case nct6792:
> + case nct6102:
> /*
> * These chips have a fixed WDTO# output pin (W83627UHG),
> * or support more than one WDTO# output pin.
> @@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
> superio_outb(cr_wdt_control, t);
>
> /* reset trigger, disable keyboard & mouse turning off watchdog */
> - t = superio_inb(0xF7) & ~0xD0;
> - superio_outb(0xF7, t);
> + t = superio_inb(cr_wdt_csr) & ~0xD0;
> + superio_outb(cr_wdt_csr, t);
>
> superio_exit();
>
> @@ -322,6 +330,7 @@ static int wdt_find(int addr)
>
> cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
> cr_wdt_control = W83627HF_WDT_CONTROL;
> + cr_wdt_csr = W836X7HF_WDT_CSR;
>
> ret = superio_enter();
> if (ret)
> @@ -387,6 +396,12 @@ static int wdt_find(int addr)
> case NCT6792_ID:
> ret = nct6792;
> break;
> + case NCT6102_ID:
> + ret = nct6102;
> + cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
> + cr_wdt_control = NCT6102D_WDT_CONTROL;
> + cr_wdt_csr = NCT6102D_WDT_CSR;
> + break;
> case 0xff:
> ret = -ENODEV;
> break;
> @@ -422,6 +437,7 @@ static int __init wdt_init(void)
> "NCT6779",
> "NCT6791",
> "NCT6792",
> + "NCT6102",
> };
>
> wdt_io = 0x2e;
next prev parent reply other threads:[~2016-02-06 17:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 2:58 [PATCH] watchdog: w83627hf: Added NCT6102D support Rob Kramer
2016-02-06 17:02 ` Guenter Roeck
2016-02-06 17:10 ` Guenter Roeck [this message]
2016-02-08 7:53 ` Rob Kramer
2016-02-08 14:11 ` Guenter Roeck
2016-02-08 10:09 ` [PATCH v2] " Rob Kramer
2016-02-08 13:53 ` Guenter Roeck
2016-03-04 19:35 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56B6290B.6010904@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=rob@solution-space.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.