From: Andrzej Hajda <a.hajda@samsung.com>
To: Chanho Park <parkch98@gmail.com>, inki.dae@samsung.com
Cc: Chanho Park <chanho61.park@samsung.com>,
linux-samsung-soc@vger.kernel.org,
Seung-Woo Kim <sw0312.kim@samsung.com>,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] drm/exynos: support exynos5422 mipi-dsi
Date: Wed, 10 Feb 2016 10:03:58 +0100 [thread overview]
Message-ID: <56BAFCFE.5090307@samsung.com> (raw)
In-Reply-To: <1454163110-20103-1-git-send-email-parkch98@gmail.com>
On 01/30/2016 03:11 PM, Chanho Park wrote:
> From: Chanho Park <chanho61.park@samsung.com>
>
> This patch supports mipi dsi for exynos5422. The dsi register
> offsets of the exynos5422 are similar with exynos5433. However,
> the values of the registers are quite different from the
> exynos5433. For example, the exynos5422 uses sw reset like
> previous chips.
>
> Cc: Inki Dae <inki.dae@samsung.com>
> Cc: Joonyoung Shim <jy0922.shim@samsung.com>
> Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
--
Regards
Andrzej
> ---
> .../bindings/display/exynos/exynos_dsim.txt | 1 +
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 31 ++++++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> index 0e6f0c0..22756b3 100644
> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> @@ -6,6 +6,7 @@ Required properties:
> "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
> "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
> "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
> + "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
> "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
> - reg: physical base address and length of the registers set for the device
> - interrupts: should contain DSI interrupt
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index d84a498..3eff6bf 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -408,6 +408,24 @@ static unsigned int reg_values[] = {
> [PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
> };
>
> +static unsigned int exynos5422_reg_values[] = {
> + [RESET_TYPE] = DSIM_SWRST,
> + [PLL_TIMER] = 500,
> + [STOP_STATE_CNT] = 0xf,
> + [PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
> + [PHYCTRL_VREG_LP] = 0,
> + [PHYCTRL_SLEW_UP] = 0,
> + [PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
> + [PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
> + [PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
> + [PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
> + [PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
> + [PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
> + [PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
> + [PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
> + [PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
> +};
> +
> static unsigned int exynos5433_reg_values[] = {
> [RESET_TYPE] = DSIM_FUNCRST,
> [PLL_TIMER] = 22200,
> @@ -482,6 +500,17 @@ static struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
> .reg_values = exynos5433_reg_values,
> };
>
> +static struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
> + .reg_ofs = exynos5433_reg_ofs,
> + .plltmr_reg = 0xa0,
> + .has_clklane_stop = 1,
> + .num_clks = 2,
> + .max_freq = 1500,
> + .wait_for_reset = 1,
> + .num_bits_resol = 12,
> + .reg_values = exynos5422_reg_values,
> +};
> +
> static struct of_device_id exynos_dsi_of_match[] = {
> { .compatible = "samsung,exynos3250-mipi-dsi",
> .data = &exynos3_dsi_driver_data },
> @@ -491,6 +520,8 @@ static struct of_device_id exynos_dsi_of_match[] = {
> .data = &exynos4415_dsi_driver_data },
> { .compatible = "samsung,exynos5410-mipi-dsi",
> .data = &exynos5_dsi_driver_data },
> + { .compatible = "samsung,exynos5422-mipi-dsi",
> + .data = &exynos5422_dsi_driver_data },
> { .compatible = "samsung,exynos5433-mipi-dsi",
> .data = &exynos5433_dsi_driver_data },
> { }
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-02-10 9:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-30 14:11 [PATCH] drm/exynos: support exynos5422 mipi-dsi Chanho Park
2016-02-10 9:03 ` Andrzej Hajda [this message]
2016-02-10 12:34 ` Emil Velikov
2016-02-11 14:10 ` Chanho Park
2016-02-11 11:07 ` Inki Dae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BAFCFE.5090307@samsung.com \
--to=a.hajda@samsung.com \
--cc=chanho61.park@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=parkch98@gmail.com \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.