From: Alexander Aring <aar@pengutronix.de>
To: Luca Zulberti <zulberti.luca@hotmail.it>
Cc: linux-wpan@vger.kernel.org, Rodolfo Giometti <giometti@enneenne.com>
Subject: Re: at86rf233 on AT91SAM9G35
Date: Mon, 15 Feb 2016 09:10:24 +0100 [thread overview]
Message-ID: <56C187F0.4050403@pengutronix.de> (raw)
In-Reply-To: <DUB115-W1015835A78DABA43B25FD538DA80@phx.gbl>
Hi,
sorry for my late reply.
Am 02/11/2016 um 08:59 AM schrieb Luca Zulberti:
> Good morning,
>
> I'm apologize for the previous email format.I have put the dts configuration and the output in these files.
>
> Best regards,
> Luca.
You said in a previous mail that you get a lot of
"irq 00 recevied"
for me looks like that you reading zeros only from the SPI bus.
I can't really help you, to setup the at86rf233 in your device tree looks a little
bit unusal but correct.
I can't help you here because this setup is very board-specific and has nothing
todo with linux-wpan project. Maybe contact the maintainers for AT91.
I don't see you muxing the SPI pins, but maybe it works because there was
a spidev before.
And also check your wiring. If it's connected to the right pins.
Please also cc linux-wpan in the next time, maybe somebody has exactly
your configuration.
- Alex
parent reply other threads:[~2016-02-15 8:10 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <DUB115-W1015835A78DABA43B25FD538DA80@phx.gbl>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C187F0.4050403@pengutronix.de \
--to=aar@pengutronix.de \
--cc=giometti@enneenne.com \
--cc=linux-wpan@vger.kernel.org \
--cc=zulberti.luca@hotmail.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.