From: Sergey Fedorov <serge.fdrv@gmail.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org, patches@linaro.org
Subject: Re: [Qemu-arm] [PATCH v2 2/2] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
Date: Fri, 19 Feb 2016 19:42:45 +0300 [thread overview]
Message-ID: <56C74605.9090305@gmail.com> (raw)
In-Reply-To: <1455892784-11328-3-git-send-email-peter.maydell@linaro.org>
On 19.02.2016 17:39, Peter Maydell wrote:
> Implement the performance monitor register traps controlled
> by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
> registers already have an access function to deal with the
> user-enable bit, and the TPM checks can be added there. We
> also need a new access function which only implements the
> TPM checks for use by the few not-EL0-accessible registers
> and by PMUSERENR_EL0 (which is always EL0-readable).
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
> ---
> target-arm/helper.c | 43 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index e9b89e6..ef3f1ce 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -439,6 +439,24 @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri,
> return CP_ACCESS_OK;
> }
>
> +/* Check for traps to performance monitor registers, which are controlled
> + * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
> + */
> +static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
> + bool isread)
> +{
> + int el = arm_current_el(env);
> +
> + if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> + && !arm_is_secure_below_el3(env)) {
> + return CP_ACCESS_TRAP_EL2;
> + }
> + if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> + return CP_ACCESS_TRAP_EL3;
> + }
> + return CP_ACCESS_OK;
> +}
> +
> static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
> @@ -774,11 +792,22 @@ static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
> bool isread)
> {
> /* Performance monitor registers user accessibility is controlled
> - * by PMUSERENR.
> + * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
> + * trapping to EL2 or EL3 for other accesses.
> */
> - if (arm_current_el(env) == 0 && !env->cp15.c9_pmuserenr) {
> + int el = arm_current_el(env);
> +
> + if (el == 0 && !env->cp15.c9_pmuserenr) {
> return CP_ACCESS_TRAP;
> }
> + if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> + && !arm_is_secure_below_el3(env)) {
> + return CP_ACCESS_TRAP_EL2;
> + }
> + if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> + return CP_ACCESS_TRAP_EL3;
> + }
> +
> return CP_ACCESS_OK;
> }
>
> @@ -1101,28 +1130,28 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
> .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
> .accessfn = pmreg_access },
> { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
> - .access = PL0_R | PL1_RW,
> + .access = PL0_R | PL1_RW, .accessfn = access_tpm,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
> .resetvalue = 0,
> .writefn = pmuserenr_write, .raw_writefn = raw_write },
> { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
> .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0,
> - .access = PL0_R | PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
> .resetvalue = 0,
> .writefn = pmuserenr_write, .raw_writefn = raw_write },
> { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
> - .access = PL1_RW,
> + .access = PL1_RW, .accessfn = access_tpm,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .resetvalue = 0,
> .writefn = pmintenset_write, .raw_writefn = raw_write },
> { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
> - .access = PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .writefn = pmintenclr_write, },
> { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
> .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2,
> - .access = PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .writefn = pmintenclr_write },
> { .name = "VBAR", .state = ARM_CP_STATE_BOTH,
WARNING: multiple messages have this Message-ID (diff)
From: Sergey Fedorov <serge.fdrv@gmail.com>
To: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>,
qemu-arm@nongnu.org, patches@linaro.org
Subject: Re: [Qemu-devel] [PATCH v2 2/2] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
Date: Fri, 19 Feb 2016 19:42:45 +0300 [thread overview]
Message-ID: <56C74605.9090305@gmail.com> (raw)
In-Reply-To: <1455892784-11328-3-git-send-email-peter.maydell@linaro.org>
On 19.02.2016 17:39, Peter Maydell wrote:
> Implement the performance monitor register traps controlled
> by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
> registers already have an access function to deal with the
> user-enable bit, and the TPM checks can be added there. We
> also need a new access function which only implements the
> TPM checks for use by the few not-EL0-accessible registers
> and by PMUSERENR_EL0 (which is always EL0-readable).
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
> ---
> target-arm/helper.c | 43 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index e9b89e6..ef3f1ce 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -439,6 +439,24 @@ static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri,
> return CP_ACCESS_OK;
> }
>
> +/* Check for traps to performance monitor registers, which are controlled
> + * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
> + */
> +static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri,
> + bool isread)
> +{
> + int el = arm_current_el(env);
> +
> + if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> + && !arm_is_secure_below_el3(env)) {
> + return CP_ACCESS_TRAP_EL2;
> + }
> + if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> + return CP_ACCESS_TRAP_EL3;
> + }
> + return CP_ACCESS_OK;
> +}
> +
> static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
> @@ -774,11 +792,22 @@ static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri,
> bool isread)
> {
> /* Performance monitor registers user accessibility is controlled
> - * by PMUSERENR.
> + * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
> + * trapping to EL2 or EL3 for other accesses.
> */
> - if (arm_current_el(env) == 0 && !env->cp15.c9_pmuserenr) {
> + int el = arm_current_el(env);
> +
> + if (el == 0 && !env->cp15.c9_pmuserenr) {
> return CP_ACCESS_TRAP;
> }
> + if (el < 2 && (env->cp15.mdcr_el2 & MDCR_TPM)
> + && !arm_is_secure_below_el3(env)) {
> + return CP_ACCESS_TRAP_EL2;
> + }
> + if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) {
> + return CP_ACCESS_TRAP_EL3;
> + }
> +
> return CP_ACCESS_OK;
> }
>
> @@ -1101,28 +1130,28 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
> .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
> .accessfn = pmreg_access },
> { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
> - .access = PL0_R | PL1_RW,
> + .access = PL0_R | PL1_RW, .accessfn = access_tpm,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
> .resetvalue = 0,
> .writefn = pmuserenr_write, .raw_writefn = raw_write },
> { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64,
> .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0,
> - .access = PL0_R | PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
> .resetvalue = 0,
> .writefn = pmuserenr_write, .raw_writefn = raw_write },
> { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
> - .access = PL1_RW,
> + .access = PL1_RW, .accessfn = access_tpm,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .resetvalue = 0,
> .writefn = pmintenset_write, .raw_writefn = raw_write },
> { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
> - .access = PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .writefn = pmintenclr_write, },
> { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64,
> .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2,
> - .access = PL1_RW, .type = ARM_CP_ALIAS,
> + .access = PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS,
> .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
> .writefn = pmintenclr_write },
> { .name = "VBAR", .state = ARM_CP_STATE_BOTH,
next prev parent reply other threads:[~2016-02-19 16:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-19 14:39 [Qemu-devel] [PATCH v2 0/2] Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps Peter Maydell
2016-02-19 14:39 ` [Qemu-devel] [PATCH v2 1/2] target-arm: Fix handling of SDCR for 32-bit code Peter Maydell
2016-02-19 16:31 ` [Qemu-arm] " Sergey Fedorov
2016-02-19 16:31 ` [Qemu-devel] " Sergey Fedorov
2016-02-19 16:38 ` [Qemu-arm] " Peter Maydell
2016-02-19 16:38 ` [Qemu-devel] " Peter Maydell
2016-02-22 18:08 ` [Qemu-arm] " Alistair Francis
2016-02-22 18:08 ` Alistair Francis
2016-02-19 14:39 ` [Qemu-devel] [PATCH v2 2/2] target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps Peter Maydell
2016-02-19 16:42 ` Sergey Fedorov [this message]
2016-02-19 16:42 ` Sergey Fedorov
2016-02-19 19:38 ` [Qemu-arm] " Alistair Francis
2016-02-19 19:38 ` Alistair Francis
2016-02-20 11:28 ` [Qemu-arm] " Peter Maydell
2016-02-20 11:28 ` Peter Maydell
2016-02-22 18:06 ` [Qemu-arm] " Alistair Francis
2016-02-22 18:06 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C74605.9090305@gmail.com \
--to=serge.fdrv@gmail.com \
--cc=patches@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.