Re: [PATCH v3 3/6] iio:pressure:ms5611: power regulator support

[Jonathan Cameron <jic23@kernel.org>]

On 17/02/16 17:52, Gregor Boirie wrote:
> From: Grégor Boirie <gregor.boirie@parrot.com>
> 
> Add support for an optional regulator which, if found into device-tree,
> will power on device at probing time.
> The regulator is declared into ms5611 DTS entry as a "vdd-supply" property.
> 
> Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
This usually only gets done when it first matters to someone. Guessing it
matters to you!

Applied to the togreg branch of iio.git

Thanks,

Jonathan
> ---
>  drivers/iio/pressure/ms5611_core.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
> index acd8e37..992ad8d 100644
> --- a/drivers/iio/pressure/ms5611_core.c
> +++ b/drivers/iio/pressure/ms5611_core.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/iio/iio.h>
>  #include <linux/delay.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <linux/iio/buffer.h>
>  #include <linux/iio/triggered_buffer.h>
> @@ -290,6 +291,18 @@ static const struct iio_info ms5611_info = {
>  static int ms5611_init(struct iio_dev *indio_dev)
>  {
>  	int ret;
> +	struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
> +	                                           "vdd");
> +
> +	/* Enable attached regulator if any. */
> +	if (!IS_ERR(vdd)) {
> +		ret = regulator_enable(vdd);
> +		if (ret) {
> +			dev_err(indio_dev->dev.parent,
> +			        "failed to enable Vdd supply: %d\n", ret);
> +			return ret;
> +		}
> +	}
>  
>  	ret = ms5611_reset(indio_dev);
>  	if (ret < 0)
>