From: Hans Verkuil <hverkuil@xs4all.nl>
To: tiffany lin <tiffany.lin@mediatek.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>,
daniel.thompson@linaro.org, Rob Herring <robh+dt@kernel.org>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Pawel Osciak <posciak@chromium.org>,
Eddie Huang <eddie.huang@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-mediatek@lists.infradead.org,
PoChun.Lin@mediatek.com
Subject: Re: [PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver
Date: Wed, 24 Feb 2016 09:30:47 +0100 [thread overview]
Message-ID: <56CD6A37.2040700@xs4all.nl> (raw)
In-Reply-To: <1456302223.15077.8.camel@mtksdaap41>
Hi Tiffany,
On 02/24/16 09:23, tiffany lin wrote:
> Hi Hans,
>
> On Tue, 2016-02-23 at 09:47 +0100, Hans Verkuil wrote:
>> On 02/23/16 09:11, Tiffany Lin wrote:
>>> ==============
>>> Introduction
>>> ==============
>>>
>>> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
>>> Mediatek Video Codec is able to handle video encoding of in a range of formats.
>>>
>>> This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load,
>>> communicate with VPU.
>>>
>>> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI.
>>> MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver
>>> earlier so it could be merged sooner.
>>>
>>> [1]https://patchwork.kernel.org/patch/8335461/
>>> [2]https://patchwork.kernel.org/patch/7596181/
>>
>> <snip>
>>
>>> v4l2-compliance test output:
>>> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
>>> Driver Info:
>>> Driver name : mtk-vcodec-enc
>>> Card type : platform:mt8173
>>> Bus info : platform:mt8173
>>> Driver version: 4.4.0
>>> Capabilities : 0x84204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>> Device Capabilities
>>> Device Caps : 0x04204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>>
>>> Compliance test for device /dev/video1 (not using libv4l2):
>>>
>>> Required ioctls:
>>> test VIDIOC_QUERYCAP: OK
>>>
>>> Allow for multiple opens:
>>> test second video open: OK
>>> test VIDIOC_QUERYCAP: OK
>>> test VIDIOC_G/S_PRIORITY: OK
>>>
>>> Debug ioctls:
>>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>
>>> Input ioctls:
>>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>> Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>
>>> Output ioctls:
>>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>
>>> Input/Output configuration ioctls:
>>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>>
>>> Control ioctls:
>>> test VIDIOC_QUERYCTRL/MENU: OK
>>> test VIDIOC_G/S_CTRL: OK
>>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>> Standard Controls: 12 Private Controls: 0
>>>
>>> Format ioctls:
>>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>> test VIDIOC_G/S_PARM: OK
>>> test VIDIOC_G_FBUF: OK (Not Supported)
>>> test VIDIOC_G_FMT: OK
>>> test VIDIOC_TRY_FMT: OK
>>> test VIDIOC_S_FMT: OK
>>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>
>>> Codec ioctls:
>>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>
>>> Buffer ioctls:
>>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>> test VIDIOC_EXPBUF: OK
>>>
>>> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
>>
>> Nice!
>>
>> Can you try 'v4l2-compliance -s'? Note that this may not work since I know
>> that v4l2-compliance doesn't work all that well with codecs, but I am
>> curious what the output is when you try streaming.
>>
>> Don't bother trying to chase down reported failures, those are likely from
>> v4l2-compliance itself. It is something I would like to improve, but -ENOTIME.
>>
>
> When I try to run 'v4l2-compliance -d /dev/video1 -s, I got follow
> output.
> I use v4.4-rc5 kernel and v4l-utils 1.6 version.
Can you compile v4l2-compliance straight from the v4l-utils.git master branch?
Version 1.6 is too old, and for proper compliance testing you should always use
the master branch. It probably won't matter for this -s test, but for the
regular test (without -s) it does make a difference.
If nothing else, using the master branch will make it easier for me to match up
the line numbers that v4l2-compliance reports to the actual source.
Thanks!
Hans
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(332): buf.querybuf(node, i) fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(868): testQueryBuf(node, cur_fmt.type, q.g_buffers())
> test MMAP: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(923): ret && ret != ENOTTY
>
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(988): setupUserPtr(node, q)
> test USERPTR: FAIL
> test DMABUF: Cannot test, specify --expbuf-device
>
> best regards,
> Tiffany
>
>> Regards,
>>
>> Hans
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
WARNING: multiple messages have this Message-ID (diff)
From: hverkuil@xs4all.nl (Hans Verkuil)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver
Date: Wed, 24 Feb 2016 09:30:47 +0100 [thread overview]
Message-ID: <56CD6A37.2040700@xs4all.nl> (raw)
In-Reply-To: <1456302223.15077.8.camel@mtksdaap41>
Hi Tiffany,
On 02/24/16 09:23, tiffany lin wrote:
> Hi Hans,
>
> On Tue, 2016-02-23 at 09:47 +0100, Hans Verkuil wrote:
>> On 02/23/16 09:11, Tiffany Lin wrote:
>>> ==============
>>> Introduction
>>> ==============
>>>
>>> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
>>> Mediatek Video Codec is able to handle video encoding of in a range of formats.
>>>
>>> This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load,
>>> communicate with VPU.
>>>
>>> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI.
>>> MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver
>>> earlier so it could be merged sooner.
>>>
>>> [1]https://patchwork.kernel.org/patch/8335461/
>>> [2]https://patchwork.kernel.org/patch/7596181/
>>
>> <snip>
>>
>>> v4l2-compliance test output:
>>> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
>>> Driver Info:
>>> Driver name : mtk-vcodec-enc
>>> Card type : platform:mt8173
>>> Bus info : platform:mt8173
>>> Driver version: 4.4.0
>>> Capabilities : 0x84204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>> Device Capabilities
>>> Device Caps : 0x04204000
>>> Video Memory-to-Memory Multiplanar
>>> Streaming
>>> Extended Pix Format
>>>
>>> Compliance test for device /dev/video1 (not using libv4l2):
>>>
>>> Required ioctls:
>>> test VIDIOC_QUERYCAP: OK
>>>
>>> Allow for multiple opens:
>>> test second video open: OK
>>> test VIDIOC_QUERYCAP: OK
>>> test VIDIOC_G/S_PRIORITY: OK
>>>
>>> Debug ioctls:
>>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>
>>> Input ioctls:
>>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>> Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>
>>> Output ioctls:
>>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>
>>> Input/Output configuration ioctls:
>>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>>
>>> Control ioctls:
>>> test VIDIOC_QUERYCTRL/MENU: OK
>>> test VIDIOC_G/S_CTRL: OK
>>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>> Standard Controls: 12 Private Controls: 0
>>>
>>> Format ioctls:
>>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>> test VIDIOC_G/S_PARM: OK
>>> test VIDIOC_G_FBUF: OK (Not Supported)
>>> test VIDIOC_G_FMT: OK
>>> test VIDIOC_TRY_FMT: OK
>>> test VIDIOC_S_FMT: OK
>>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>
>>> Codec ioctls:
>>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>
>>> Buffer ioctls:
>>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>> test VIDIOC_EXPBUF: OK
>>>
>>> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
>>
>> Nice!
>>
>> Can you try 'v4l2-compliance -s'? Note that this may not work since I know
>> that v4l2-compliance doesn't work all that well with codecs, but I am
>> curious what the output is when you try streaming.
>>
>> Don't bother trying to chase down reported failures, those are likely from
>> v4l2-compliance itself. It is something I would like to improve, but -ENOTIME.
>>
>
> When I try to run 'v4l2-compliance -d /dev/video1 -s, I got follow
> output.
> I use v4.4-rc5 kernel and v4l-utils 1.6 version.
Can you compile v4l2-compliance straight from the v4l-utils.git master branch?
Version 1.6 is too old, and for proper compliance testing you should always use
the master branch. It probably won't matter for this -s test, but for the
regular test (without -s) it does make a difference.
If nothing else, using the master branch will make it easier for me to match up
the line numbers that v4l2-compliance reports to the actual source.
Thanks!
Hans
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(332): buf.querybuf(node, i) fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(868): testQueryBuf(node, cur_fmt.type, q.g_buffers())
> test MMAP: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(923): ret && ret != ENOTTY
>
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(988): setupUserPtr(node, q)
> test USERPTR: FAIL
> test DMABUF: Cannot test, specify --expbuf-device
>
> best regards,
> Tiffany
>
>> Regards,
>>
>> Hans
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2016-02-24 8:30 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-23 8:11 [PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` [PATCH v5 1/8] dt-bindings: Add a binding for Mediatek Video Processor Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` [PATCH v5 2/8] [media] VPU: mediatek: support Mediatek VPU Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
[not found] ` <1456215081-16858-3-git-send-email-tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-02-23 8:11 ` [PATCH v5 3/8] arm64: dts: mediatek: Add node for Mediatek Video Processor Unit Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
[not found] ` <1456215081-16858-4-git-send-email-tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-02-23 8:11 ` [PATCH v5 4/8] dt-bindings: Add a binding for Mediatek Video Encoder Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` [PATCH v5 5/8] [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
[not found] ` <1456215081-16858-6-git-send-email-tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-02-23 8:11 ` [PATCH v5 6/8] [media] vcodec: mediatek: Add Mediatek VP8 " Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` [PATCH v5 7/8] [media] vcodec: mediatek: Add Mediatek H264 " Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
[not found] ` <1456215081-16858-8-git-send-email-tiffany.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-02-23 8:11 ` [PATCH v5 8/8] arm64: dts: mediatek: Add Video Encoder for MT8173 Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:11 ` Tiffany Lin
2016-02-23 8:47 ` [PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver Hans Verkuil
2016-02-23 8:47 ` Hans Verkuil
[not found] ` <56CC1CAB.1060409-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org>
2016-02-24 8:23 ` tiffany lin
2016-02-24 8:23 ` tiffany lin
2016-02-24 8:23 ` tiffany lin
2016-02-24 8:30 ` Hans Verkuil [this message]
2016-02-24 8:30 ` Hans Verkuil
2016-02-24 10:53 ` tiffany lin
2016-02-24 10:53 ` tiffany lin
2016-02-24 10:53 ` tiffany lin
2016-02-26 11:58 ` Stanimir Varbanov
2016-02-26 11:58 ` Stanimir Varbanov
2016-02-26 11:58 ` Stanimir Varbanov
2016-02-26 13:09 ` Hans Verkuil
2016-02-26 13:09 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CD6A37.2040700@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=PoChun.Lin@mediatek.com \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=eddie.huang@mediatek.com \
--cc=hans.verkuil@cisco.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@osg.samsung.com \
--cc=posciak@chromium.org \
--cc=robh+dt@kernel.org \
--cc=tiffany.lin@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.