From: robin.murphy@arm.com (Robin Murphy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: realview: DT support for the PBA8
Date: Wed, 24 Feb 2016 12:24:16 +0000 [thread overview]
Message-ID: <56CDA0F0.9050608@arm.com> (raw)
In-Reply-To: <1456303714-31039-1-git-send-email-linus.walleij@linaro.org>
Hi Linus,
On 24/02/16 08:48, Linus Walleij wrote:
> This adds a devicetree for the ARM RealView PBA8 platform,
> also known as HBI-0178, "RealView(R) Platform Baseboard for
> Cortex(TM)-A8".
>
> Tested in QEMU with -M realview-pb-a8 and works like a charm,
> however with these annoying boot messages:
>
> of_amba_device_create(): amba_device_add()
> failed (-19) for /soc/sysctl at 10001000
> of_amba_device_create(): amba_device_add()
> failed (-19) for /soc/ssp at 1000d000
> of_amba_device_create(): amba_device_add()
> failed (-19) for /soc/timer at 10018000
> of_amba_device_create(): amba_device_add()
> failed (-19) for /soc/timer at 10019000
> of_amba_device_create(): amba_device_add()
> failed (-19) for /soc/sysctl at 1001a000
>
> I think this is because these PrimeCells do not exist in the
> QEMU machine model but would work fine on the real hardware.
> QEMU still works, because the SP810 clocks will anyway probe,
> as they are not amba_devices but use the special CLK_OF_DECLARE()
> probing macro.
And here I thought that big black box on the far corner of my desk was
only good for taking up space. I have no idea of its provenance, but
here's what it had to say (using appended dtb and a hack in the
decompressor to set r1=-1, r2=0 because I can't be bothered faffing with
a 2010-vintage u-boot):
RealView PBA8 #go 0x7fc0
## Starting application at 0x00007FC0 ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.5.0-rc4-00004-ga81bbd8-dirty (robmur01 at e104324-lin) (gcc
version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #16 SMP Wed Feb 24
11:39:06 GMT 2016
CPU: ARMv7 Processor [411fc081] revision 1 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: ARM RealView PB-A8
bootconsole [earlycon0] enabled
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
PERCPU: Embedded 11 pages/cpu @c7ee4000 s13376 r8192 d23488 u45056
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyAMA0
earlyprintk
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124392K/131072K available (3863K kernel code, 128K rwdata, 1076K
rodata, 212K init, 138K bss, 6680K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
DTCM : 0xfffe8000 - 0xfffe8000 ( 0 kB)
ITCM : 0xfffe0000 - 0xfffe0000 ( 0 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc04dafec (4940 kB)
.init : 0xc04db000 - 0xc0510000 ( 212 kB)
.data : 0xc0510000 - 0xc05303a0 ( 129 kB)
.bss : 0xc0531000 - 0xc05538e0 ( 139 kB)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
L2C: failed to init: -19
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/clk/versatile/clk-sp810.c:137
clk_sp810_of_setup+0x124/0x168()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc4-00004-ga81bbd8-dirty #16
Hardware name: ARM RealView Machine (Device Tree Support)
Backtrace:
[<c0013a98>] (dump_backtrace) from [<c0013c8c>] (show_stack+0x18/0x1c)
r6:600000d3 r5:00000000 r4:c051f800
[<c0013c74>] (show_stack) from [<c01b26b0>] (dump_stack+0x94/0xb0)
[<c01b261c>] (dump_stack) from [<c0025884>] (warn_slowpath_common+0x7c/0xb8)
r6:00000009 r5:00000089 r4:00000000
[<c0025808>] (warn_slowpath_common) from [<c0025964>]
(warn_slowpath_null+0x24/0x28)
r8:c7ef7570 r7:00000001 r6:c7ef7394 r5:c7807980 r4:c780798c
[<c0025940>] (warn_slowpath_null) from [<c04f4f34>]
(clk_sp810_of_setup+0x124/0x168)
[<c04f4e10>] (clk_sp810_of_setup) from [<c04f4714>]
(of_clk_init+0x13c/0x1e0)
r10:00000003 r9:00000001 r8:00000000 r7:00000001 r6:c0511f6c r5:c78054c0
r4:c0511f74
[<c04f45d8>] (of_clk_init) from [<c04ddac0>] (time_init+0x2c/0x38)
r10:c05008c0 r9:c7ffc840 r8:c0531000 r7:c05127c0 r6:c0531000 r5:ffffffff
r4:00000000
[<c04dda94>] (time_init) from [<c04dbbc4>] (start_kernel+0x248/0x364)
[<c04db97c>] (start_kernel) from [<0000807c>] (0x807c)
r10:00000000 r9:411fc081 r8:00004059 r7:c0516910 r6:c05008bc r5:c051286c
r4:c0531294
---[ end trace cb88537fdc8fa200 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/clk/versatile/clk-sp810.c:137
clk_sp810_of_setup+0x124/0x168()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
4.5.0-rc4-00004-ga81bbd8-dirty #16
Hardware name: ARM RealView Machine (Device Tree Support)
Backtrace:
[<c0013a98>] (dump_backtrace) from [<c0013c8c>] (show_stack+0x18/0x1c)
r6:600000d3 r5:00000000 r4:c051f800
[<c0013c74>] (show_stack) from [<c01b26b0>] (dump_stack+0x94/0xb0)
[<c01b261c>] (dump_stack) from [<c0025884>] (warn_slowpath_common+0x7c/0xb8)
r6:00000009 r5:00000089 r4:00000000
[<c0025808>] (warn_slowpath_common) from [<c0025964>]
(warn_slowpath_null+0x24/0x28)
r8:c7ef7570 r7:00000002 r6:c7ef7394 r5:c7807980 r4:c78079a4
[<c0025940>] (warn_slowpath_null) from [<c04f4f34>]
(clk_sp810_of_setup+0x124/0x168)
[<c04f4e10>] (clk_sp810_of_setup) from [<c04f4714>]
(of_clk_init+0x13c/0x1e0)
r10:00000003 r9:00000001 r8:00000000 r7:00000001 r6:c0511f6c r5:c78054c0
r4:c0511f74
[<c04f45d8>] (of_clk_init) from [<c04ddac0>] (time_init+0x2c/0x38)
r10:c05008c0 r9:c7ffc840 r8:c0531000 r7:c05127c0 r6:c0531000 r5:ffffffff
r4:00000000
[<c04dda94>] (time_init) from [<c04dbbc4>] (start_kernel+0x248/0x364)
[<c04db97c>] (start_kernel) from [<0000807c>] (0x807c)
r10:00000000 r9:411fc081 r8:00004059 r7:c0516910 r6:c05008bc r5:c051286c
r4:c0531294
---[ end trace cb88537fdc8fa201 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/clk/versatile/clk-sp810.c:137
clk_sp810_of_setup+0x124/0x168()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
4.5.0-rc4-00004-ga81bbd8-dirty #16
Hardware name: ARM RealView Machine (Device Tree Support)
Backtrace:
[<c0013a98>] (dump_backtrace) from [<c0013c8c>] (show_stack+0x18/0x1c)
r6:600000d3 r5:00000000 r4:c051f800
[<c0013c74>] (show_stack) from [<c01b26b0>] (dump_stack+0x94/0xb0)
[<c01b261c>] (dump_stack) from [<c0025884>] (warn_slowpath_common+0x7c/0xb8)
r6:00000009 r5:00000089 r4:00000000
[<c0025808>] (warn_slowpath_common) from [<c0025964>]
(warn_slowpath_null+0x24/0x28)
r8:c7ef7570 r7:00000003 r6:c7ef7394 r5:c7807980 r4:c78079bc
[<c0025940>] (warn_slowpath_null) from [<c04f4f34>]
(clk_sp810_of_setup+0x124/0x168)
[<c04f4e10>] (clk_sp810_of_setup) from [<c04f4714>]
(of_clk_init+0x13c/0x1e0)
r10:00000003 r9:00000001 r8:00000000 r7:00000001 r6:c0511f6c r5:c78054c0
r4:c0511f74
[<c04f45d8>] (of_clk_init) from [<c04ddac0>] (time_init+0x2c/0x38)
r10:c05008c0 r9:c7ffc840 r8:c0531000 r7:c05127c0 r6:c0531000 r5:ffffffff
r4:00000000
[<c04dda94>] (time_init) from [<c04dbbc4>] (start_kernel+0x248/0x364)
[<c04db97c>] (start_kernel) from [<0000807c>] (0x807c)
r10:00000000 r9:411fc081 r8:00004059 r7:c0516910 r6:c05008bc r5:c051286c
r4:c0531294
---[ end trace cb88537fdc8fa202 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/clk/versatile/clk-sp810.c:137
clk_sp810_of_setup+0x124/0x168()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
4.5.0-rc4-00004-ga81bbd8-dirty #16
Hardware name: ARM RealView Machine (Device Tree Support)
Backtrace:
[<c0013a98>] (dump_backtrace) from [<c0013c8c>] (show_stack+0x18/0x1c)
r6:600000d3 r5:00000000 r4:c051f800
[<c0013c74>] (show_stack) from [<c01b26b0>] (dump_stack+0x94/0xb0)
[<c01b261c>] (dump_stack) from [<c0025884>] (warn_slowpath_common+0x7c/0xb8)
r6:00000009 r5:00000089 r4:00000000
[<c0025808>] (warn_slowpath_common) from [<c0025964>]
(warn_slowpath_null+0x24/0x28)
r8:c7ef7570 r7:00000004 r6:c7ef7394 r5:c7807980 r4:c78079d4
[<c0025940>] (warn_slowpath_null) from [<c04f4f34>]
(clk_sp810_of_setup+0x124/0x168)
[<c04f4e10>] (clk_sp810_of_setup) from [<c04f4714>]
(of_clk_init+0x13c/0x1e0)
r10:00000003 r9:00000001 r8:00000000 r7:00000001 r6:c0511f6c r5:c78054c0
r4:c0511f74
[<c04f45d8>] (of_clk_init) from [<c04ddac0>] (time_init+0x2c/0x38)
r10:c05008c0 r9:c7ffc840 r8:c0531000 r7:c05127c0 r6:c0531000 r5:ffffffff
r4:00000000
[<c04dda94>] (time_init) from [<c04dbbc4>] (start_kernel+0x248/0x364)
[<c04db97c>] (start_kernel) from [<0000807c>] (0x807c)
r10:00000000 r9:411fc081 r8:00004059 r7:c0516910 r6:c05008bc r5:c051286c
r4:c0531294
---[ end trace cb88537fdc8fa203 ]---
clk: couldn't get parent clock 0 for /soc/sysctl at 1001a000
clk: couldn't get parent clock 0 for /soc/sysctl at 1001a000
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275 ns
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every
2147483647500ns
Console: colour dummy device 80x30
Calibrating delay loop... 743.83 BogoMIPS (lpj=3719168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket -1, mpidr 0
Setting up static identity map for 0x82a0 - 0x8310
Brought up 1 CPUs
SMP: Total of 1 processors activated (743.83 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: debug architecture 0x4 unsupported.
Serial: AMBA PL011 UART driver
10009000.serial: ttyAMA0 at MMIO 0x10009000 (irq = 20, base_baud = 0) is
a PL011 rev2
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
1000a000.serial: ttyAMA1 at MMIO 0x1000a000 (irq = 21, base_baud = 0) is
a PL011 rev2
1000b000.serial: ttyAMA2 at MMIO 0x1000b000 (irq = 22, base_baud = 0) is
a PL011 rev2
1000c000.serial: ttyAMA3 at MMIO 0x1000c000 (irq = 36, base_baud = 0) is
a PL011 rev2
ssp-pl022 1000d000.ssp: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 1000d000.ssp: mapped registers from 0x1000d000 to c8884000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c i2c-0: Failed to register i2c client ds1338 at 0x68 (-16)
i2c i2c-0: Can't create device at 0x68
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm,sp804
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
io scheduler noop registered
io scheduler deadline registered (default)
pl061_gpio 10013000.gpio: PL061 GPIO chip @0x10013000 registered
pl061_gpio 10014000.gpio: PL061 GPIO chip @0x10014000 registered
pl061_gpio 10015000.gpio: PL061 GPIO chip @0x10015000 registered
clcd-pl11x 10020000.clcd: PL111 rev0 at 0x10020000
clcd-pl11x 10020000.clcd: /issp/clcd at 10020000 hardware, 640x480 at 59 display
Console: switching to colour frame buffer device 80x30
realview-soc soc: RealView Syscon Core ID: 0x2178f505, HBI-178
libphy: smsc911x-mdio: probed
SMSC LAN911x Internal PHY 4e000000.etherne:01: attached PHY driver [SMSC
LAN911x Internal PHY] (mii_bus:phy_addr=4e000000.etherne:01, irq=-1)
smsc911x 4e000000.ethernet eth0: MAC Address: 00:02:f7:00:0a:c2
isp1760 4f000000.usb: bus width: 32, oc: digital
isp1760 4f000000.usb: NXP ISP1760 USB Host Controller
isp1760 4f000000.usb: new USB bus registered, assigned bus number 1
isp1760 4f000000.usb: irq 19, io mem 0x4f000000
isp1760 4f000000.usb: USB ISP 1761 HW rev. 1 started
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ISP1760 USB device initialised
mousedev: PS/2 mouse device common for all mice
rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
rtc-pl031 10017000.rtc: rtc core: registered pl031 as rtc1
versatile reboot driver registered
mmci-pl18x 10005000.mmcsd: Got CD GPIO
mmci-pl18x 10005000.mmcsd: Got WP GPIO
mmci-pl18x 10005000.mmcsd: mmc0: PL180 manf 41 rev0 at 0x10005000 irq
32,33 (pio)
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000,
irq 31
aaci-pl041 10004000.aaci: FIFO 512 entries
NET: Registered protocol family 17
Registering SWP/SWPB emulation handler
isp1760 4f000000.usb: port 1 high speed
rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:17:12 UTC
(946685832)
ALSA device list:
#0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 31
usb 1-1: new high-speed USB device number 2 using isp1760
isp1760 4f000000.usb: port 1 high speed
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
atkbd serio0: keyboard reset failed on 10006000.kmi
atkbd serio1: keyboard reset failed on 10007000.kmi
atkbd serio0: keyboard reset failed on 10006000.kmi
atkbd serio1: keyboard reset failed on 10007000.kmi
Waiting for root device /dev/mmcblk0p1...
It then fails to notice my SD card, even if I eject and reinsert it :(
Robin.
next prev parent reply other threads:[~2016-02-24 12:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-24 8:48 [PATCH] ARM: realview: DT support for the PBA8 Linus Walleij
2016-02-24 8:53 ` Arnd Bergmann
2016-02-24 10:18 ` Peter Maydell
2016-02-24 12:24 ` Robin Murphy [this message]
2016-02-24 15:48 ` Robin Murphy
2016-02-24 15:52 ` Linus Walleij
2016-02-24 15:59 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CDA0F0.9050608@arm.com \
--to=robin.murphy@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.