From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi] [PATCH 2/2] ARM: dts: sun8i: Enable ir receiver on orangepi pc
Date: Wed, 24 Feb 2016 14:26:37 +0100 [thread overview]
Message-ID: <56CDAF8D.70501@redhat.com> (raw)
In-Reply-To: <20160224121640.GA25658@box2.japko.eu>
Hi,
On 24-02-16 13:16, Krzysztof Adamski wrote:
> On Wed, Feb 24, 2016 at 12:03:17AM +0100, Hans de Goede wrote:
>> Enable the ir receiver found on the orangepi pc board.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
>
> I don't think this file is avaiable in mainline. Wouldn't it be better to use patch against existing orangepi-plus dts file?
>
> Otherwise I tested this patch and it works fine on my Orangepi PC (some data is splitted out when reading /dev/input/event0).
Ah yes, that is my bad, I've been waiting with upstreaming an orangepi-pc dts until all the
usb bits are upstream as my dts has usb host support enabled, I should probably split
out the usb-host support and upstream the rest already.
Regards,
Hans
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Krzysztof Adamski <k@japko.eu>
Cc: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Jelle van der Waa <jelle-oJJ1AqDjjO4@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [linux-sunxi] [PATCH 2/2] ARM: dts: sun8i: Enable ir receiver on orangepi pc
Date: Wed, 24 Feb 2016 14:26:37 +0100 [thread overview]
Message-ID: <56CDAF8D.70501@redhat.com> (raw)
In-Reply-To: <20160224121640.GA25658-xLeyfSbClftGit24Ens98Q@public.gmane.org>
Hi,
On 24-02-16 13:16, Krzysztof Adamski wrote:
> On Wed, Feb 24, 2016 at 12:03:17AM +0100, Hans de Goede wrote:
>> Enable the ir receiver found on the orangepi pc board.
>>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>> arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
>
> I don't think this file is avaiable in mainline. Wouldn't it be better to use patch against existing orangepi-plus dts file?
>
> Otherwise I tested this patch and it works fine on my Orangepi PC (some data is splitted out when reading /dev/input/event0).
Ah yes, that is my bad, I've been waiting with upstreaming an orangepi-pc dts until all the
usb bits are upstream as my dts has usb host support enabled, I should probably split
out the usb-host support and upstream the rest already.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-24 13:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-23 23:03 [PATCH 0/2] ARM: dts: sun8i: Add ir receiver nodes for H3 Hans de Goede
2016-02-23 23:03 ` Hans de Goede
2016-02-23 23:03 ` [PATCH 1/2] ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi Hans de Goede
2016-02-23 23:03 ` Hans de Goede
2016-02-25 19:38 ` Maxime Ripard
2016-02-25 19:38 ` Maxime Ripard
2016-02-23 23:03 ` [PATCH 2/2] ARM: dts: sun8i: Enable ir receiver on orangepi pc Hans de Goede
2016-02-23 23:03 ` Hans de Goede
2016-02-24 12:16 ` [linux-sunxi] " Krzysztof Adamski
2016-02-24 12:16 ` Krzysztof Adamski
2016-02-24 13:26 ` Hans de Goede [this message]
2016-02-24 13:26 ` [linux-sunxi] " Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CDAF8D.70501@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.