From: Greg Ungerer <gregungerer@westnet.com.au>
To: Adam Buchbinder <adam.buchbinder@gmail.com>,
linux-m68k@lists.linux-m68k.org
Cc: trivial@kernel.org
Subject: Re: [PATCH] m68k: Fix misspellings in comments.
Date: Fri, 26 Feb 2016 10:38:07 +1000 [thread overview]
Message-ID: <56CF9E6F.7060309@westnet.com.au> (raw)
In-Reply-To: <1456389599-14349-1-git-send-email-adam.buchbinder@gmail.com>
Hi Adam,
On 25/02/16 18:39, Adam Buchbinder wrote:
> Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
> ---
> arch/m68k/include/asm/MC68328.h | 6 +++---
> arch/m68k/include/asm/MC68EZ328.h | 6 +++---
> arch/m68k/include/asm/MC68VZ328.h | 6 +++---
> arch/m68k/include/asm/m54xxacr.h | 4 ++--
> arch/m68k/include/asm/mac_iop.h | 2 +-
> arch/m68k/include/asm/mcftimer.h | 2 +-
> arch/m68k/mac/via.c | 2 +-
> 7 files changed, 14 insertions(+), 14 deletions(-)
I have no problem with the MC68*328.h, m54xxacr.h and mcftimer.h
changes. So for those:
Acked-by: Greg Ungerer <gerg@uclinux.org>
Regards
Greg
> diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
> index 4ebf098..1a8080c 100644
> --- a/arch/m68k/include/asm/MC68328.h
> +++ b/arch/m68k/include/asm/MC68328.h
> @@ -798,7 +798,7 @@
>
> /**********
> *
> - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
> + * 0xFFFFF7xx -- Serial Peripheral Interface Slave (SPIS)
> *
> **********/
>
> @@ -824,7 +824,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -904,7 +904,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_GPIOSRC 0x1000 /* GPIO source */
> diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
> index d1bde58..fedac87 100644
> --- a/arch/m68k/include/asm/MC68EZ328.h
> +++ b/arch/m68k/include/asm/MC68EZ328.h
> @@ -631,7 +631,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -712,7 +712,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
> @@ -1160,7 +1160,7 @@ typedef volatile struct {
> #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
> #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
> #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
> -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
> +#define DRAMMC_REF_MASK 0x001f /* Refresh Cycle */
> #define DRAMMC_REF_SHIFT 0
>
> /*
> diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
> index 6bd1bf1..34a51b2 100644
> --- a/arch/m68k/include/asm/MC68VZ328.h
> +++ b/arch/m68k/include/asm/MC68VZ328.h
> @@ -724,7 +724,7 @@
>
> /**********
> *
> - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
> + * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
> *
> **********/
>
> @@ -806,7 +806,7 @@
>
> #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
> #define UBAUD_PRESCALER_SHIFT 0
> -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
> +#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divisor */
> #define UBAUD_DIVIDE_SHIFT 8
> #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
> #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */
> @@ -1256,7 +1256,7 @@ typedef struct {
> #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */
> #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */
> #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */
> -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */
> +#define DRAMMC_REF_MASK 0x001f /* Refresh Cycle */
> #define DRAMMC_REF_SHIFT 0
>
> /*
> diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
> index 6d13cae..59e1710 100644
> --- a/arch/m68k/include/asm/m54xxacr.h
> +++ b/arch/m68k/include/asm/m54xxacr.h
> @@ -23,8 +23,8 @@
> #define CACR_IEC 0x00008000 /* Enable instruction cache */
> #define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
> #define CACR_IDPI 0x00001000 /* Disable CPUSHL */
> -#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
> -#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
> +#define CACR_IHLCK 0x00000800 /* Instruction cache half lock */
> +#define CACR_IDCM 0x00000400 /* Instruction cache inhibit */
> #define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
> #define CACR_EUSP 0x00000020 /* Enable separate user a7 */
>
> diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
> index fde874a..df3ea1a 100644
> --- a/arch/m68k/include/asm/mac_iop.h
> +++ b/arch/m68k/include/asm/mac_iop.h
> @@ -48,7 +48,7 @@
>
> /* IOP message status codes */
>
> -#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */
> +#define IOP_MSGSTATUS_UNUSED 0 /* Unused message structure */
> #define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */
> #define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */
> #define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */
> diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
> index 089f0f1..1150e42 100644
> --- a/arch/m68k/include/asm/mcftimer.h
> +++ b/arch/m68k/include/asm/mcftimer.h
> @@ -51,7 +51,7 @@
> * Bit definitions for the Timer Event Registers (TER).
> */
> #define MCFTIMER_TER_CAP 0x01 /* Capture event */
> -#define MCFTIMER_TER_REF 0x02 /* Refernece event */
> +#define MCFTIMER_TER_REF 0x02 /* Reference event */
>
> /****************************************************************************/
> #endif /* mcftimer_h */
> diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
> index ce56e04..920ff63 100644
> --- a/arch/m68k/mac/via.c
> +++ b/arch/m68k/mac/via.c
> @@ -68,7 +68,7 @@ static int gIER,gIFR,gBufA,gBufB;
> * interrupt. This limitation also seems to apply to VIA clone logic cores in
> * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
> *
> - * We used to fake it by configuring the relevent VIA pin as an output
> + * We used to fake it by configuring the relevant VIA pin as an output
> * (to mask the interrupt) or input (to unmask). That scheme did not work on
> * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
> * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
>
prev parent reply other threads:[~2016-02-26 0:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 8:39 [PATCH] m68k: Fix misspellings in comments Adam Buchbinder
2016-02-25 9:23 ` Finn Thain
2016-02-25 17:53 ` [PATCH v2] " Adam Buchbinder
2016-02-29 9:37 ` Geert Uytterhoeven
2016-02-26 0:38 ` Greg Ungerer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CF9E6F.7060309@westnet.com.au \
--to=gregungerer@westnet.com.au \
--cc=adam.buchbinder@gmail.com \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.