From: Mike Christie <michaelc@cs.wisc.edu>
To: Lee Duncan <lduncan@suse.com>, linux-scsi@vger.kernel.org
Cc: hare@suse.de, konrad@kernel.org
Subject: Re: [PATCHv2] iscsi_ibft: Add prefix-len attr and display netmask
Date: Mon, 29 Feb 2016 12:45:18 -0600 [thread overview]
Message-ID: <56D491BE.5010705@cs.wisc.edu> (raw)
In-Reply-To: <21ae62f67edf39ab09f6c5aa842b89fd7d6e1dc6.1456423714.git.lduncan@suse.com>
On 02/25/2016 12:15 PM, Lee Duncan wrote:
> From: Hannes Reinecke <hare@suse.de>
>
> The iBFT table only specifies a prefix length, not a netmask.
> And the netmask is pretty much pointless for IPv6.
> So introduce a new attribute 'prefix-len' and display the
> netmask attribute only for IPv4 addresses.
The code looks ok to me, but I think this ipv4 comment was left over
from the last posting since it conflicts with the comment below about
always displaying it. Maybe it can just be edited when the patch is
merged to avoid having to resend again. If so,
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
>
> Some older user-space code might rely on the netmask attribute
> being present, so we should always display it.
>
> Changes from v1:
> - Combined two patches into one
>
> Signed-off-by: Hannes Reinecke <hare@suse.de>
> Signed-off-by: Lee Duncan <lduncan@suse.com>
> ---
> drivers/firmware/iscsi_ibft.c | 4 ++++
> drivers/scsi/iscsi_boot_sysfs.c | 5 +++++
> include/linux/iscsi_boot_sysfs.h | 1 +
> 3 files changed, 10 insertions(+)
>
> diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
> index 72791232e46b..81037e5fe301 100644
> --- a/drivers/firmware/iscsi_ibft.c
> +++ b/drivers/firmware/iscsi_ibft.c
> @@ -319,6 +319,9 @@ static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
> val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
> str += sprintf(str, "%pI4", &val);
> break;
> + case ISCSI_BOOT_ETH_PREFIX_LEN:
> + str += sprintf(str, "%d\n", nic->subnet_mask_prefix);
> + break;
> case ISCSI_BOOT_ETH_ORIGIN:
> str += sprintf(str, "%d\n", nic->origin);
> break;
> @@ -460,6 +463,7 @@ static umode_t ibft_check_nic_for(void *data, int type)
> if (address_not_null(nic->ip_addr))
> rc = S_IRUGO;
> break;
> + case ISCSI_BOOT_ETH_PREFIX_LEN:
> case ISCSI_BOOT_ETH_SUBNET_MASK:
> if (nic->subnet_mask_prefix)
> rc = S_IRUGO;
> diff --git a/drivers/scsi/iscsi_boot_sysfs.c b/drivers/scsi/iscsi_boot_sysfs.c
> index 680bf6f0ce76..8f0ea97cf31f 100644
> --- a/drivers/scsi/iscsi_boot_sysfs.c
> +++ b/drivers/scsi/iscsi_boot_sysfs.c
> @@ -166,6 +166,7 @@ static struct attribute_group iscsi_boot_target_attr_group = {
> iscsi_boot_rd_attr(eth_index, index, ISCSI_BOOT_ETH_INDEX);
> iscsi_boot_rd_attr(eth_flags, flags, ISCSI_BOOT_ETH_FLAGS);
> iscsi_boot_rd_attr(eth_ip, ip-addr, ISCSI_BOOT_ETH_IP_ADDR);
> +iscsi_boot_rd_attr(eth_prefix, prefix-len, ISCSI_BOOT_ETH_PREFIX_LEN);
> iscsi_boot_rd_attr(eth_subnet, subnet-mask, ISCSI_BOOT_ETH_SUBNET_MASK);
> iscsi_boot_rd_attr(eth_origin, origin, ISCSI_BOOT_ETH_ORIGIN);
> iscsi_boot_rd_attr(eth_gateway, gateway, ISCSI_BOOT_ETH_GATEWAY);
> @@ -181,6 +182,7 @@ static struct attribute *ethernet_attrs[] = {
> &iscsi_boot_attr_eth_index.attr,
> &iscsi_boot_attr_eth_flags.attr,
> &iscsi_boot_attr_eth_ip.attr,
> + &iscsi_boot_attr_eth_prefix.attr,
> &iscsi_boot_attr_eth_subnet.attr,
> &iscsi_boot_attr_eth_origin.attr,
> &iscsi_boot_attr_eth_gateway.attr,
> @@ -208,6 +210,9 @@ static umode_t iscsi_boot_eth_attr_is_visible(struct kobject *kobj,
> else if (attr == &iscsi_boot_attr_eth_ip.attr)
> return boot_kobj->is_visible(boot_kobj->data,
> ISCSI_BOOT_ETH_IP_ADDR);
> + else if (attr == &iscsi_boot_attr_eth_prefix.attr)
> + return boot_kobj->is_visible(boot_kobj->data,
> + ISCSI_BOOT_ETH_PREFIX_LEN);
> else if (attr == &iscsi_boot_attr_eth_subnet.attr)
> return boot_kobj->is_visible(boot_kobj->data,
> ISCSI_BOOT_ETH_SUBNET_MASK);
> diff --git a/include/linux/iscsi_boot_sysfs.h b/include/linux/iscsi_boot_sysfs.h
> index 2a8b1659bf35..548d55395488 100644
> --- a/include/linux/iscsi_boot_sysfs.h
> +++ b/include/linux/iscsi_boot_sysfs.h
> @@ -23,6 +23,7 @@ enum iscsi_boot_eth_properties_enum {
> ISCSI_BOOT_ETH_INDEX,
> ISCSI_BOOT_ETH_FLAGS,
> ISCSI_BOOT_ETH_IP_ADDR,
> + ISCSI_BOOT_ETH_PREFIX_LEN,
> ISCSI_BOOT_ETH_SUBNET_MASK,
> ISCSI_BOOT_ETH_ORIGIN,
> ISCSI_BOOT_ETH_GATEWAY,
>
next prev parent reply other threads:[~2016-02-29 18:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 18:15 [PATCHv2] Enable iBFT IPv6 booting with prefix length Lee Duncan
2016-02-25 18:15 ` [PATCHv2] iscsi_ibft: Add prefix-len attr and display netmask Lee Duncan
2016-02-29 18:45 ` Mike Christie [this message]
2016-02-29 21:04 ` Konrad Rzeszutek Wilk
2016-02-29 21:49 ` Lee Duncan
2016-02-29 21:25 ` Lee Duncan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D491BE.5010705@cs.wisc.edu \
--to=michaelc@cs.wisc.edu \
--cc=hare@suse.de \
--cc=konrad@kernel.org \
--cc=lduncan@suse.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.