[PATCH 7/8] ARM64: dts: amlogic: Extend GXBaby GIC node

[andre.przywara@arm.com (Andre Przywara)]

Hi,

On 01/03/16 12:53, Carlo Caione wrote:
> On Tue, Mar 1, 2016 at 1:43 PM, Andre Przywara <andre.przywara@arm.com> wrote:
>> Hi,
>>
>> On 01/03/16 11:18, Andreas F?rber wrote:
>>> Hi Andre,
>>>
>>> Am 01.03.2016 um 12:01 schrieb Andre Przywara:
>>>> On 29/02/16 23:44, Andreas F?rber wrote:
>>>>> Add GICH and GICV resources for HYP mode - guess based on other vendors.
>>>>
>>>> Do you know if the firmware allows the kernel to be entered in EL2
>>>> (which is the arm64 name for HYP)?
>>>> So can we run kvm?
>>>> If you have a booted kernel, can you grep for "EL2" and "kvm" in the dmesg?
>>>
>>> I do not have a rootfs yet (MMC v5 patches by Carlo are still waiting
>>> for review), but with this change the KVM driver initializes okay - the
>>> purpose of this patch!
>>>
>>>> Also you should merge this patch into 3/8, same for 8/8.
>>>
>>> If people confirm this is generally or specifically for this SoC correct
>>> then sure. So far 3/8 seems a safe subset for lack of public documentation.
>>
>> The GIC is an integral part of the SoC, so this clearly belongs in there.
>>
>>>>> Signed-off-by: Andreas F?rber <afaerber@suse.de>
>>>>> ---
>>>>>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 +++-
>>
>> In general I was wondering if this naming is correct?
>> Shouldn't it be something with "s905" in it? Because this the SoC that
>> is driving all those hardware and the peripherals that you describe in
>> there are clearly within the SoC.
>> So something like meson-s905.dtsi or the like?
> 
> When I first submitted support for the meson8 and meson8b I picked up
> the names according to the Amlogic SDK.
> In the latest Amlogic drop this SoC is identified as meson-gxbb so
> probably we should stick to this name.

Oh, I guess in this case it's fine then. I was just wondering if we
should use a name that is more descriptive to the uninitiated reader.

Cheers,
Andre.