From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-pci-owner@vger.kernel.org>
Received: from li153-180.members.linode.com ([109.74.206.180]:46930 "EHLO
	mail.tekno-soft.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751362AbcCAS6N (ORCPT
	<rfc822;linux-pci@vger.kernel.org>); Tue, 1 Mar 2016 13:58:13 -0500
Received: from dragon.tekno-soft.it (host142-53-static.94-94-b.business.telecomitalia.it [94.94.53.142])
	(using TLSv1.2 with cipher DHE-RSA-AES128-SHA (128/128 bits))
	(No client certificate requested)
	(Authenticated sender: robyf@tekno-soft.it)
	by mail.tekno-soft.it (Postfix) with ESMTPSA id AF46B17727
	for <linux-pci@vger.kernel.org>; Tue,  1 Mar 2016 18:48:17 +0000 (UTC)
To: linux-pci@vger.kernel.org
From: Roberto Fichera <kernel@tekno-soft.it>
Subject: iMX6q PCIe phy link never came up on kernel v4.4.x
Message-ID: <56D5E3DF.9030906@tekno-soft.it>
Date: Tue, 1 Mar 2016 19:47:59 +0100
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Sender: linux-pci-owner@vger.kernel.org
List-ID: <linux-pci.vger.kernel.org>

Hi There,

Working on a custom iMX6q board I'm getting a PCIe phy link never came up, even if uboot seems detecting
everything ok. My DTS is enabling PCIe with

&pcie {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_pcie_reset>;
    reset-gpio = <&gpio7 12 0>;
    status = "okay";
};

The PCIe is connected to a PCIe-to-PCI TI XIO2001. The XIO2001 power is controlled by GPIO_9 and 
the corresponding fixed regulator is set as

		reg_pcie: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_pcie_reg>;
			regulator-name = "MPCIE_3V3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio1 9 0>;
			regulator-always-on;
			enable-active-high;
		};

so I'd like to know if there is any other special setup to do in order to get it to work on a v4.4.x kernel.
Or anyway how to debug it.

Any suggestion?

Thanks in advance,
Roberto Fichera.

U-Boot 2014.04-imx_v2014.04_3.14.38_6qp_beta+g6e9282c (Feb 15 2016 - 10:02:31)

CPU:   Freescale i.MX6Q rev1.5 at 792 MHz
CPU:   Temperature 35 C, calibration data: 0x5664d569
Reset cause: POR
Board: Janas iMX6Q (ID:e315c064140749d4)
I2C:   ready
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

  00:01.0     - 16c3:abcd - Bridge device
   01:00.0    - 104c:8240 - Bridge device
    02:04.0   - 1397:08b4 - Network controller
In:    serial
Out:   serial
Err:   serial
Found PFUZE100! deviceid=10,revid=21
mmc1(part 0) is current device
Net:   FEC [PRIME]
Warning: failed to set MAC address

Normal Boot
....
....
[    0.236141] PCI host bridge /soc/pcie@0x01000000 ranges:
[    0.236162]   No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
[    0.236213]   err 0x01f00000..0x01f7ffff -> 0x01f00000
[    0.236250]    IO 0x01f80000..0x01f8ffff -> 0x00000000
[    0.236330]   MEM 0x01000000..0x01efffff -> 0x01000000
-->>> [    0.546690] imx6q-pcie 1ffc000.pcie: phy link never came up
[    0.547263] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[    0.547287] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.547304] pci_bus 0000:00: root bus resource [??? 0x01f00000-0x01f7ffff flags 0x0]
[    0.547321] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.547335] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[    0.548608] PCI: bus0: Fast back to back transfers disabled
[    0.548950] PCI: bus1: Fast back to back transfers enabled
[    0.549107] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[    0.549137] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
[    0.549159] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.549945] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
...