From: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
To: linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH V7 1/2] regulator: Add document for MT6323 regulator
Date: Wed, 2 Mar 2016 19:11:27 +0100 [thread overview]
Message-ID: <56D72CCF.3070301@openwrt.org> (raw)
In-Reply-To: <20160302180728.GA21394@rob-hp-laptop>
On 02/03/2016 19:07, Rob Herring wrote:
> On Thu, Feb 25, 2016 at 11:37:10AM +0100, John Crispin wrote:
>> Signed-off-by: John Crispin <blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> ---
>> This patch needs to be merged post-rc1 as it depends on the MFD series of
>> the PMIC which is already inside Lee's tree pending the PR.
>
> Why? It is an indpendent change with no actual dependency.
>
that comment applies to the whole series and not just the one patch as
2/2 uses registers contained within a header file which is part of the
series adding the actual MFD driver. adding the doc without the driver
seemed wrong to me.
>>
>> Changes in V7
>> * remove another compatible string
>> * small wording changes
>>
>> Changes in V6
>> * remove the compatible string
>>
>> Changes in V5
>> * regulator vs regulators
>>
>> Changes in V4
>> * regulator is a subnode and not a property
>>
>> .../bindings/regulator/mt6323-regulator.txt | 239 ++++++++++++++++++++
>> 1 file changed, 239 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
>> new file mode 100644
>> index 0000000..9fd95e7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
>> @@ -0,0 +1,239 @@
>> +Mediatek MT6323 Regulator Driver
>> +
>> +All voltage regulators are defined as subnodes of the regulators node. A list
>> +of regulators provided by this controller are defined as subnodes of the
>> +PMIC's node. Each regulator is named according to its regulator type,
>> +buck_<name> and ldo_<name>. The definition for each of these nodes is defined
>> +using the standard binding for regulators at
>> +Documentation/devicetree/bindings/regulator/regulator.txt.
>> +
>> +The valid names for regulators are::
>> +BUCK:
>> + buck_vproc, buck_vsys, buck_vpa
>> +LDO:
>> + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
>> + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
>> + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
>> + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
>> +
>> +Example:
>> +
>> + pmic: mt6323 {
>> + compatible = "mediatek,mt6323";
>> +
>> + mt6323regulator: regulators {
>> + mt6323_vproc_reg: buck_vproc{
>> + regulator-name = "vproc";
>> + regulator-min-microvolt = < 700000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vsys_reg: buck_vsys{
>> + regulator-name = "vsys";
>> + regulator-min-microvolt = <1400000>;
>> + regulator-max-microvolt = <2987500>;
>> + regulator-ramp-delay = <25000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vpa_reg: buck_vpa{
>> + regulator-name = "vpa";
>> + regulator-min-microvolt = < 500000>;
>> + regulator-max-microvolt = <3650000>;
>> + };
>> +
>> + mt6323_vtcxo_reg: ldo_vtcxo{
>> + regulator-name = "vtcxo";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-enable-ramp-delay = <90>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vcn28_reg: ldo_vcn28{
>> + regulator-name = "vcn28";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-enable-ramp-delay = <185>;
>> + };
>> +
>> + mt6323_vcn33_bt_reg: ldo_vcn33_bt{
>> + regulator-name = "vcn33_bt";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3600000>;
>> + regulator-enable-ramp-delay = <185>;
>> + };
>> +
>> + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
>> + regulator-name = "vcn33_wifi";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3600000>;
>> + regulator-enable-ramp-delay = <185>;
>> + };
>> +
>> + mt6323_va_reg: ldo_va{
>> + regulator-name = "va";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vcama_reg: ldo_vcama{
>> + regulator-name = "vcama";
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vio28_reg: ldo_vio28{
>> + regulator-name = "vio28";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vusb_reg: ldo_vusb{
>> + regulator-name = "vusb";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <216>;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vmc_reg: ldo_vmc{
>> + regulator-name = "vmc";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <36>;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vmch_reg: ldo_vmch{
>> + regulator-name = "vmch";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <36>;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vemc3v3_reg: ldo_vemc3v3{
>> + regulator-name = "vemc3v3";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <36>;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vgp1_reg: ldo_vgp1{
>> + regulator-name = "vgp1";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vgp2_reg: ldo_vgp2{
>> + regulator-name = "vgp2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vgp3_reg: ldo_vgp3{
>> + regulator-name = "vgp3";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vcn18_reg: ldo_vcn18{
>> + regulator-name = "vcn18";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vsim1_reg: ldo_vsim1{
>> + regulator-name = "vsim1";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vsim2_reg: ldo_vsim2{
>> + regulator-name = "vsim2";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vrtc_reg: ldo_vrtc{
>> + regulator-name = "vrtc";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vcamaf_reg: ldo_vcamaf{
>> + regulator-name = "vcamaf";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vibr_reg: ldo_vibr{
>> + regulator-name = "vibr";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <36>;
>> + };
>> +
>> + mt6323_vrf18_reg: ldo_vrf18{
>> + regulator-name = "vrf18";
>> + regulator-min-microvolt = <1825000>;
>> + regulator-max-microvolt = <1825000>;
>> + regulator-enable-ramp-delay = <187>;
>> + };
>> +
>> + mt6323_vm_reg: ldo_vm{
>> + regulator-name = "vm";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vio18_reg: ldo_vio18{
>> + regulator-name = "vio18";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + mt6323_vcamd_reg: ldo_vcamd{
>> + regulator-name = "vcamd";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> +
>> + mt6323_vcamio_reg: ldo_vcamio{
>> + regulator-name = "vcamio";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-enable-ramp-delay = <216>;
>> + };
>> + };
>> + };
>> --
>> 1.7.10.4
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
>
next prev parent reply other threads:[~2016-03-02 18:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 10:37 [PATCH V7 1/2] regulator: Add document for MT6323 regulator John Crispin
2016-02-25 10:37 ` John Crispin
2016-02-25 10:37 ` [PATCH V7 2/2] regulator: mt6323: Add support " John Crispin
2016-02-25 10:37 ` John Crispin
2016-02-26 2:10 ` Mark Brown
2016-02-26 2:10 ` Mark Brown
2016-03-02 18:07 ` [PATCH V7 1/2] regulator: Add document " Rob Herring
2016-03-02 18:07 ` Rob Herring
2016-03-02 18:11 ` John Crispin [this message]
2016-03-02 18:13 ` John Crispin
2016-03-02 18:13 ` John Crispin
-- strict thread matches above, loose matches on Subject: below --
2016-02-22 12:56 John Crispin
2016-02-22 12:56 ` John Crispin
2016-02-22 12:56 ` John Crispin
[not found] ` <1456145817-12741-1-git-send-email-blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2016-02-26 14:22 ` Arnd Bergmann
2016-02-26 14:58 ` John Crispin
[not found] ` <56D06816.7070709-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2016-02-26 15:16 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D72CCF.3070301@openwrt.org \
--to=blogic-p3rkhjxn3npafugrpc6u6w@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.