From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Newbie SPL question for socfpga_sockit
Date: Thu, 03 Mar 2016 10:48:09 +0100 [thread overview]
Message-ID: <56D80859.4080208@denx.de> (raw)
In-Reply-To: <CAMcKmiHR7dfrH__Y70wV93rGa2t1n4Gzu8v2fvgPOiTgPkw8fg@mail.gmail.com>
On 03/03/2016 07:55 AM, George Broz wrote:
> On 2 March 2016 at 14:54, Dinh Nguyen <dinguyen@opensource.altera.com> wrote:
>
>>> socfpga_common.h and re-built the project. I picked up
>>> spl/u-boot-spl-dtb.sfp and
>>> u-boot-dtb.img and transferred them to the SD card with:
>>>
>>> dd if=u-boot-spl-dtb.sfp of=/dev/sdf3 bs=64k seek=0
>>> dd if=u-boot-dtb.img of=/dev/sdf3 bs=64k seek=4
>>>
>>
>> You can just do a 'make u-boot-with-spl.sfp' and burn the
>> u-boot-with-spl.sfp file straight to the a2 partition, or sdf3.
>>
> Thanks, Dinh. That's a time saver.
>
> On my version that target is: 'make u-boot-with-spl-dtb.sfp'
This was changed after 2016.01 was out by the following patch:
commit bd7dc3883bf4e61538e5519ca2d6798b3e8e0695
Author: Simon Glass <sjg@chromium.org>
Date: Sun Jan 31 18:10:53 2016 -0700
socfpga: Simplify Makefile filenames
--
Best regards,
Marek Vasut
prev parent reply other threads:[~2016-03-03 9:48 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 21:54 [U-Boot] Newbie SPL question for socfpga_sockit George Broz
2016-02-18 2:45 ` Phil Reid
2016-03-02 2:40 ` George Broz
2016-03-02 3:49 ` Phil Reid
2016-03-03 6:49 ` George Broz
2016-03-03 7:11 ` Phil Reid
2016-03-03 14:57 ` George Broz
2016-03-09 1:42 ` Phil Reid
2016-03-09 10:55 ` Marek Vasut
2016-03-09 16:06 ` George Broz
2016-03-16 1:29 ` George Broz
2016-03-16 16:17 ` George Broz
2016-03-17 1:35 ` Marek Vasut
2016-03-18 18:59 ` George Broz
2016-03-18 19:32 ` Marek Vasut
2016-03-18 21:22 ` George Broz
2016-03-19 11:10 ` Phil Reid
2016-03-20 16:44 ` Marek Vasut
2016-03-20 16:49 ` Marek Vasut
2016-03-29 1:56 ` George Broz
2016-03-29 17:46 ` Marek Vasut
2016-03-20 15:55 ` Dinh Nguyen
2016-03-20 16:42 ` Marek Vasut
2016-03-22 17:06 ` Dinh Nguyen
2016-03-26 20:52 ` Marek Vasut
2016-04-05 8:33 ` Phil Reid
2016-04-05 22:03 ` Marek Vasut
2016-04-06 0:31 ` George Broz
2016-04-06 0:45 ` Marek Vasut
2016-04-06 1:17 ` George Broz
2016-04-06 10:43 ` Marek Vasut
2016-04-07 1:42 ` George Broz
2016-04-07 2:05 ` Marek Vasut
2016-04-07 13:14 ` George Broz
2016-04-07 20:39 ` Marek Vasut
2016-04-07 23:31 ` George Broz
2016-04-07 23:36 ` Marek Vasut
2016-04-07 23:51 ` George Broz
2016-04-08 5:16 ` Stefan Roese
2016-04-08 12:36 ` Marek Vasut
2016-04-08 22:40 ` George Broz
2016-04-10 17:47 ` Marek Vasut
2016-04-11 2:03 ` George Broz
2016-04-11 14:02 ` Marek Vasut
2016-04-12 15:53 ` Dinh Nguyen
2016-04-12 16:00 ` Marek Vasut
2016-04-12 16:08 ` Dinh Nguyen
2016-04-12 16:11 ` Marek Vasut
2016-04-13 9:25 ` Chin Liang See
2016-04-12 16:09 ` Stefan Roese
2016-04-13 11:09 ` Marek Vasut
2016-04-06 7:00 ` Phil Reid
2016-04-06 11:51 ` Marek Vasut
2016-04-06 15:04 ` Phil Reid
2016-04-06 20:38 ` Marek Vasut
2016-03-29 1:44 ` George Broz
2016-03-29 17:45 ` Marek Vasut
2016-03-03 21:16 ` George Broz
2016-03-02 22:54 ` Dinh Nguyen
2016-03-02 23:04 ` Marek Vasut
2016-03-02 23:08 ` Dinh Nguyen
2016-03-02 23:24 ` Marek Vasut
2016-03-03 14:48 ` Dinh Nguyen
2016-03-03 14:51 ` Marek Vasut
2016-03-03 22:00 ` George Broz
2016-03-03 22:09 ` Marek Vasut
[not found] ` <CAMcKmiG8OMmbZ262n8gL7eM=WAgaakaZ5rWzCC1vYu7yzGBYAA@mail.gmail.com>
[not found] ` <56D8BDD7.8070604@denx.de>
[not found] ` <CAMcKmiGrZ94sZKY85Y3aC1_fwgV8oJeAJ0O71bY=gMxUGBp=FQ@mail.gmail.com>
[not found] ` <56D8C3A0.9020204@denx.de>
2016-03-03 23:46 ` George Broz
2016-03-04 16:52 ` Dinh Nguyen
2016-03-04 16:06 ` Dinh Nguyen
2016-03-04 19:03 ` Marek Vasut
2016-03-21 14:05 ` Chin Liang See
2016-03-21 15:45 ` Chin Liang See
2016-03-23 15:00 ` Chin Liang See
2016-03-23 15:37 ` [U-Boot] SoCFPGA cache / S-bit problem - was " Stefan Roese
2016-04-06 16:35 ` Dinh Nguyen
2016-04-06 16:46 ` Marek Vasut
2016-04-06 16:51 ` Dinh Nguyen
2016-03-03 6:55 ` [U-Boot] " George Broz
2016-03-03 9:48 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D80859.4080208@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.