From: Heiner Kallweit <hkallweit1@gmail.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-media@vger.kernel.org
Subject: Re: [git:media_tree/master] [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs
Date: Thu, 3 Mar 2016 19:18:17 +0100 [thread overview]
Message-ID: <56D87FE9.4000408@gmail.com> (raw)
In-Reply-To: <E1abRXi-00035h-0E@www.linuxtv.org>
Am 03.03.2016 um 12:28 schrieb Mauro Carvalho Chehab:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/cgit.cgi/media_tree.git tree:
>
> Subject: [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs
> Author: Heiner Kallweit <hkallweit1@gmail.com>
> Date: Mon Feb 8 17:25:59 2016 -0200
>
> This patch adds a binary attribute /sys/class/rc/rc?/wakeup_data which
> allows to read / write the wakeup sequence.
>
When working on another module I was reminded not to forget updating Documentation/ABI.
I think the same applies here. This patch introduces a new sysfs attribute that should
be documented. I'll submit a patch for adding Documentation/ABI/testing/sysfs-class-rc-nuvoton
Rgds, Heiner
> In combination with the core extension for exposing the most recent raw
> packet this allows to easily define and set a wakeup sequence.
>
> At least on my Zotac CI321 the BIOS resets the wakeup sequence at each boot
> to a factory default. Therefore I use a udev rule
> SUBSYSTEM=="rc", DRIVERS=="nuvoton-cir", ACTION=="add", RUN+="<script>"
> with the script basically doing
> cat <stored wakeup sequence> >/sys${DEVPATH}/wakeup_data
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
>
> drivers/media/rc/nuvoton-cir.c | 85 ++++++++++++++++++++++++++++++++++++++++++
> drivers/media/rc/nuvoton-cir.h | 3 ++
> 2 files changed, 88 insertions(+)
>
> ---
>
> http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=449c1fcd86f5077d5076a955e65c07a7c4cbbf9d
> diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
> index c96da3aaf00b..c2ee5bdc6c7d 100644
> --- a/drivers/media/rc/nuvoton-cir.c
> +++ b/drivers/media/rc/nuvoton-cir.c
> @@ -39,6 +39,8 @@
>
> #include "nuvoton-cir.h"
>
> +static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt);
> +
> static const struct nvt_chip nvt_chips[] = {
> { "w83667hg", NVT_W83667HG },
> { "NCT6775F", NVT_6775F },
> @@ -177,6 +179,83 @@ static void nvt_set_ioaddr(struct nvt_dev *nvt, unsigned long *ioaddr)
> }
> }
>
> +static ssize_t wakeup_data_read(struct file *fp, struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct rc_dev *rc_dev = to_rc_dev(dev);
> + struct nvt_dev *nvt = rc_dev->priv;
> + int fifo_len, len;
> + unsigned long flags;
> + int i;
> +
> + spin_lock_irqsave(&nvt->nvt_lock, flags);
> +
> + fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
> + len = min(fifo_len, WAKEUP_MAX_SIZE);
> +
> + if (off >= len) {
> + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> + return 0;
> + }
> +
> + if (len > count)
> + len = count;
> +
> + /* go to first element to be read */
> + while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX) != off)
> + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
> +
> + for (i = 0; i < len; i++)
> + buf[i] = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
> +
> + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> +
> + return len;
> +}
> +
> +static ssize_t wakeup_data_write(struct file *fp, struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct rc_dev *rc_dev = to_rc_dev(dev);
> + struct nvt_dev *nvt = rc_dev->priv;
> + unsigned long flags;
> + u8 tolerance, config;
> + int i;
> +
> + if (off > 0)
> + return -EINVAL;
> +
> + /* hardcode the tolerance to 10% */
> + tolerance = DIV_ROUND_UP(count, 10);
> +
> + spin_lock_irqsave(&nvt->nvt_lock, flags);
> +
> + nvt_clear_cir_wake_fifo(nvt);
> + nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP);
> + nvt_cir_wake_reg_write(nvt, tolerance, CIR_WAKE_FIFO_CMP_TOL);
> +
> + config = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON);
> +
> + /* enable writes to wake fifo */
> + nvt_cir_wake_reg_write(nvt, config | CIR_WAKE_IRCON_MODE1,
> + CIR_WAKE_IRCON);
> +
> + for (i = 0; i < count; i++)
> + nvt_cir_wake_reg_write(nvt, buf[i], CIR_WAKE_WR_FIFO_DATA);
> +
> + nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON);
> +
> + spin_unlock_irqrestore(&nvt->nvt_lock, flags);
> +
> + return count;
> +}
> +
> +static BIN_ATTR_RW(wakeup_data, WAKEUP_MAX_SIZE);
> +
> /* dump current cir register contents */
> static void cir_dump_regs(struct nvt_dev *nvt)
> {
> @@ -1133,6 +1212,10 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
> NVT_DRIVER_NAME "-wake", (void *)nvt))
> goto exit_unregister_device;
>
> + ret = device_create_bin_file(&rdev->dev, &bin_attr_wakeup_data);
> + if (ret)
> + goto exit_unregister_device;
> +
> device_init_wakeup(&pdev->dev, true);
>
> dev_notice(&pdev->dev, "driver has been successfully loaded\n");
> @@ -1156,6 +1239,8 @@ static void nvt_remove(struct pnp_dev *pdev)
> {
> struct nvt_dev *nvt = pnp_get_drvdata(pdev);
>
> + device_remove_bin_file(&nvt->rdev->dev, &bin_attr_wakeup_data);
> +
> nvt_disable_cir(nvt);
>
> /* enable CIR Wake (for IR power-on) */
> diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
> index 4a5650dffa29..c9c98ebb19ee 100644
> --- a/drivers/media/rc/nuvoton-cir.h
> +++ b/drivers/media/rc/nuvoton-cir.h
> @@ -417,3 +417,6 @@ struct nvt_dev {
> /* as VISTA MCE definition, valid carrier value */
> #define MAX_CARRIER 60000
> #define MIN_CARRIER 30000
> +
> +/* max wakeup sequence length */
> +#define WAKEUP_MAX_SIZE 65
>
next parent reply other threads:[~2016-03-03 18:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1abRXi-00035h-0E@www.linuxtv.org>
2016-03-03 18:18 ` Heiner Kallweit [this message]
2016-03-03 18:52 ` [git:media_tree/master] [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfs Mauro Carvalho Chehab
2016-03-03 19:22 ` Heiner Kallweit
2016-03-03 20:56 ` Mauro Carvalho Chehab
2016-03-03 21:39 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D87FE9.4000408@gmail.com \
--to=hkallweit1@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.