From mboxrd@z Thu Jan 1 00:00:00 1970 From: Murali Karicheri Subject: Micrel Phy - Is there a way to configure the Phy not to do 802.3x flow control? Date: Thu, 3 Mar 2016 17:18:38 -0500 Message-ID: <56D8B83E.7000303@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit To: , "open list:TI NETCP ETHERNET DRIVER" , "Kwok, WingMan" Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:45439 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758556AbcCCWSn (ORCPT ); Thu, 3 Mar 2016 17:18:43 -0500 Sender: netdev-owner@vger.kernel.org List-ID: Hi, We are using Micrel Phy in one of our board and wondering if we can force the Phy to disable flow control at start. I have a 1G ethernet switch connected to Phy and the phy always enable flow control. I would like to configure the phy not to flow control. Is that possible and if yes, what should I do in the my Ethernet driver to tell the Phy not to enable flow control? -- Murali Karicheri Linux Kernel, Keystone