From: Thomas Hellstrom <thellstrom@vmware.com>
To: Sebastian Herbszt <herbszt@gmx.de>, dri-devel@lists.freedesktop.org
Subject: Re: boot hang with vmwgfx on 4.5-rc6
Date: Fri, 4 Mar 2016 23:39:59 +0100 [thread overview]
Message-ID: <56DA0EBF.8070609@vmware.com> (raw)
In-Reply-To: <20160229223824.000026b0@localhost>
Hi!
Thanks for reporting. It appears that on hardware version 9, we get a
NULL pointer dereference
on kernel 4.5.
[ 15.298499] BUG: unable to handle kernel NULL pointer dereference
at (null)
[ 15.301027] IP: [< (null)>] (null)
[ 15.302590] PGD 0
[ 15.303276] Oops: 0010 [#1] SMP
[ 15.304385] Modules linked in: xt_conntrack ebtable_filter
ebtable_nat ebtable_broute bridge stp llc ebtables ip6table_security
ip6table_raw ip6table_mangle ip6table_nat nf_conntrack_ipv6
nf_defrag_ipv6 nf_nat_ipv6 ip6table_filter ip6_tables iptable_security
iptable_raw iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 nf_nat nf_conntrack vmw_vsock_vmci_transport vsock
snd_seq_midi bnep snd_seq_midi_event btusb btrtl snd_ens1371 gameport
btbcm snd_ac97_codec btintel ppdev ac97_bus snd_seq coretemp
crct10dif_pclmul crc32_pclmul bluetooth snd_pcm crc32c_intel vmw_balloon
ghash_clmulni_intel snd_rawmidi snd_timer snd_seq_device snd rfkill
soundcore vmw_vmci shpchp i2c_piix4 nfit parport_pc parport acpi_cpufreq
nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx serio_raw
drm_kms_helper vmw_pvscsi vmxnet3 ttm drm ata_generic pata_acpi
[ 15.330004] CPU: 1 PID: 1075 Comm: gnome-shell Not tainted 4.5.0-rc6 #1
[ 15.332000] Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 07/02/2015
[ 15.335179] task: ffff880077394b00 ti: ffff8800773a8000 task.ti:
ffff8800773a8000
[ 15.337411] RIP: 0010:[<0000000000000000>] [<
(null)>] (null)
[ 15.339729] RSP: 0018:ffff8800773abc50 EFLAGS: 00010246
[ 15.341335] RAX: ffffffffa00ed640 RBX: ffff880036171000 RCX:
ffff880036173770
[ 15.343470] RDX: 0000000000002000 RSI: 0000000000002000 RDI:
ffff8800361734b8
[ 15.345605] RBP: ffff8800773abd18 R08: 0000000000000000 R09:
0000000000000000
[ 15.347798] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff8800361734e0
[ 15.349929] R13: ffff880036171000 R14: ffff8800773abd60 R15:
00000000fffffffe
[ 15.352096] FS: 00007fb347faca80(0000) GS:ffff88007c640000(0000)
knlGS:0000000000000000
[ 15.354513] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.356230] CR2: 0000000000000000 CR3: 000000007739f000 CR4:
00000000001406e0
[ 15.358427] Stack:
[ 15.359092] ffffffffa0024535 ffff8800773abc68 ffffffff811196cd
ffff880036173764
[ 15.361477] ffff880036173770 0000000000000001 ffff880036171410
ffff880000000001
[ 15.364091] ffff880079f38000 0000000000000000 00000000812059bd
0000000000000000
[ 15.366488] Call Trace:
[ 15.367278] [<ffffffffa0024535>] ? drm_mode_getconnector+0x375/0x400
[drm]
[ 15.369515] [<ffffffff811196cd>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 15.371537] [<ffffffffa0015c72>] drm_ioctl+0x152/0x560 [drm]
[ 15.373295] [<ffffffffa00241c0>] ? drm_mode_getcrtc+0x150/0x150 [drm]
[ 15.375268] [<ffffffffa00cf56d>] vmw_generic_ioctl+0x17d/0x280 [vmwgfx]
[ 15.377277] [<ffffffffa0015b20>] ? drm_getmap+0xe0/0xe0 [drm]
[ 15.379044] [<ffffffffa00cf6a5>] vmw_unlocked_ioctl+0x15/0x20 [vmwgfx]
[ 15.381043] [<ffffffff8126e5a2>] do_vfs_ioctl+0xa2/0x690
[ 15.382684] [<ffffffff8127acbf>] ? __fget+0x11f/0x200
[ 15.384249] [<ffffffff8127aba5>] ? __fget+0x5/0x200
[ 15.385760] [<ffffffff8126ec09>] SyS_ioctl+0x79/0x90
[ 15.387296] [<ffffffff8182daf2>] entry_SYSCALL_64_fastpath+0x12/0x76
[ 15.389246] Code: Bad RIP value.
[ 15.390375] RIP [< (null)>] (null)
[ 15.391992] RSP <ffff8800773abc50>
[ 15.393081] CR2: 0000000000000000
[ 15.394174] ---[ end trace f9f3f138ca13da13 ]---
On 02/29/2016 10:38 PM, Sebastian Herbszt wrote:
> Hello,
>
> I get a boot hang with vmwgfx on 4.5-rc6 (4.5.0-rc6-1.gb239884-default from
> openSUSE). This happens on VMware Player 5.0.2.
> Same VM works fine with kernel 4.4 but on 4.5-rc6 it hangs with
>
> [drm] Initialized vmwgfx 2.9.0 20150810 for 0000:00:0f.0 on minor 0
>
> I am able to boot the system with "nomodeset".
>
> Sebastian
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-03-04 22:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 21:38 boot hang with vmwgfx on 4.5-rc6 Sebastian Herbszt
2016-03-04 22:39 ` Thomas Hellstrom [this message]
2016-03-07 13:51 ` Thomas Hellstrom
2016-03-07 16:26 ` Thierry Reding
2016-03-07 22:33 ` Sebastian Herbszt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56DA0EBF.8070609@vmware.com \
--to=thellstrom@vmware.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=herbszt@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.