All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Michal Simek <michal.simek@xilinx.com>,
	soren.brinkmann@xilinx.com, Rob Herring <robh+dt@kernel.org>,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
Date: Mon, 7 Mar 2016 15:39:59 +0200	[thread overview]
Message-ID: <56DD84AF.8040900@intel.com> (raw)
In-Reply-To: <56DD7892.3040908@rock-chips.com>

On 07/03/16 14:48, Shawn Lin wrote:
> 在 2016/3/7 20:07, Adrian Hunter 写道:
>> On 05/03/16 04:24, Shawn Lin wrote:
>>> This patch adds Generic PHY access for sdhci-of-arasan. Driver
>>> can get PHY handler from dt-binding, and power-on/init the PHY.
>>> Currently, it's just mandatory for arasan,sdhci-5.1.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>>
>>> Serise-changes: 6
>>> - rebase on Ulf's next
>>> - fix some preexisting problems of err handling suggested
>>>    by Adrian
>>>
>>> Serise-changes: 5
>>> - remove rpm support from this serise
>>> - fix some err case for handling phy
>>>
>>> Serise-changes: 4
>>> - remove suspend/resume_phy
>>> - add err handle label for system PM callback
>>> - fix comments of struct sdhci_arasan_data and system PM
>>>    callback suggested by Michal
>>>
>>> Serise-changes: 3
>>> - remove phy_init/exit for suspend/resume
>>> - adjust phy_int/power_on seq to make code more reasonable
>>>    simplify suspend/resume_phy
>>>
>>> Serise-changes: 2
>>> - Keep phy as a mandatory requirement for arasan,sdhci-5.1
>>>
>>
>>
>> It looks good, but, sorry to be a pain, the fixes to the error handling
>> really have to be separate patches.  I would make a separate patch for
>> removing clk_disable(sdhci_arasan->clk_ahb) from sdhci_arasan_resume() and
>> another for the error handling fixes in sdhci_arasan_probe().
> 
> Thanks. Does that mean you will split these two changes out of this
> single patch by youself? :)

You need to do it.  I am just Ack/Nack'ing at the moment.

> 
>>
>> By the way, those "Serise-changes" should not be in the commit msg.
> 
> My fault, sorry for forgeting to check the format after generating it by
> patman.py
> 
>>
>>> ---
>>>
>>> Changes in v6: None
>>> Changes in v2: None
>>>
>>>   drivers/mmc/host/sdhci-of-arasan.c | 71
>>> +++++++++++++++++++++++++++++++++-----
>>>   1 file changed, 63 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c
>>> b/drivers/mmc/host/sdhci-of-arasan.c
>>> index 1e4b5e0..2e482b1 100644
>>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>>> @@ -21,6 +21,7 @@
>>>
>>>   #include <linux/module.h>
>>>   #include <linux/of_device.h>
>>> +#include <linux/phy/phy.h>
>>>   #include "sdhci-pltfm.h"
>>>
>>>   #define SDHCI_ARASAN_CLK_CTRL_OFFSET    0x2c
>>> @@ -32,9 +33,11 @@
>>>   /**
>>>    * struct sdhci_arasan_data
>>>    * @clk_ahb:    Pointer to the AHB clock
>>> + * @phy: Pointer to the generic phy
>>>    */
>>>   struct sdhci_arasan_data {
>>>       struct clk    *clk_ahb;
>>> +    struct phy    *phy;
>>>   };
>>>
>>>   static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host
>>> *host)
>>> @@ -88,6 +91,15 @@ static int sdhci_arasan_suspend(struct device *dev)
>>>       if (ret)
>>>           return ret;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_off(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power off phy.\n");
>>> +            sdhci_resume_host(host);
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>       clk_disable(pltfm_host->clk);
>>>       clk_disable(sdhci_arasan->clk_ahb);
>>>
>>> @@ -118,10 +130,17 @@ static int sdhci_arasan_resume(struct device *dev)
>>>       ret = clk_enable(pltfm_host->clk);
>>>       if (ret) {
>>>           dev_err(dev, "Cannot enable SD clock.\n");
>>> -        clk_disable(sdhci_arasan->clk_ahb);
>>>           return ret;
>>>       }
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power on phy.\n");
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>       return sdhci_resume_host(host);
>>>   }
>>>   #endif /* ! CONFIG_PM_SLEEP */
>>> @@ -148,19 +167,21 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>>       sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
>>>       if (IS_ERR(sdhci_arasan->clk_ahb)) {
>>>           dev_err(&pdev->dev, "clk_ahb clock not found.\n");
>>> -        return PTR_ERR(sdhci_arasan->clk_ahb);
>>> +        ret = PTR_ERR(sdhci_arasan->clk_ahb);
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
>>>       if (IS_ERR(clk_xin)) {
>>>           dev_err(&pdev->dev, "clk_xin clock not found.\n");
>>> -        return PTR_ERR(clk_xin);
>>> +        ret = PTR_ERR(clk_xin);
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
>>>       if (ret) {
>>>           dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
>>> -        return ret;
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       ret = clk_prepare_enable(clk_xin);
>>> @@ -178,19 +199,48 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>>           goto clk_disable_all;
>>>       }
>>>
>>> +    sdhci_arasan->phy = ERR_PTR(-ENODEV);
>>> +    if (of_device_is_compatible(pdev->dev.of_node,
>>> +                    "arasan,sdhci-5.1")) {
>>> +        sdhci_arasan->phy = devm_phy_get(&pdev->dev,
>>> +                         "phy_arasan");
>>> +        if (IS_ERR(sdhci_arasan->phy)) {
>>> +            ret = PTR_ERR(sdhci_arasan->phy);
>>> +            dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_init(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_init err.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_power_on err.\n");
>>> +            goto err_phy_power;
>>> +        }
>>> +    }
>>> +
>>>       ret = sdhci_add_host(host);
>>>       if (ret)
>>> -        goto err_pltfm_free;
>>> +        goto err_add_host;
>>>
>>>       return 0;
>>>
>>> -err_pltfm_free:
>>> -    sdhci_pltfm_free(pdev);
>>> +err_add_host:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>> +        phy_power_off(sdhci_arasan->phy);
>>> +err_phy_power:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>> +        phy_exit(sdhci_arasan->phy);
>>>   clk_disable_all:
>>>       clk_disable_unprepare(clk_xin);
>>>   clk_dis_ahb:
>>>       clk_disable_unprepare(sdhci_arasan->clk_ahb);
>>> -
>>> +err_pltfm_free:
>>> +    sdhci_pltfm_free(pdev);
>>>       return ret;
>>>   }
>>>
>>> @@ -202,6 +252,11 @@ static int sdhci_arasan_remove(struct
>>> platform_device *pdev)
>>>       struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
>>>       struct clk *clk_ahb = sdhci_arasan->clk_ahb;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        phy_power_off(sdhci_arasan->phy);
>>> +        phy_exit(sdhci_arasan->phy);
>>> +    }
>>> +
>>>       ret = sdhci_pltfm_unregister(pdev);
>>>
>>>       clk_disable_unprepare(clk_ahb);
>>>
>>
>>
>>
>>
> 
> 


      reply	other threads:[~2016-03-07 13:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-05  2:23 [PATCH v6 0/2] Add phy support for arasan,sdhci-5.1 Shawn Lin
2016-03-05  2:24 ` [PATCH v6 1/2] Documentation: bindings: add description of phy for sdhci-of-arasan Shawn Lin
2016-03-05  2:24 ` [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support " Shawn Lin
2016-03-07 12:07   ` Adrian Hunter
2016-03-07 12:48     ` Shawn Lin
2016-03-07 13:39       ` Adrian Hunter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56DD84AF.8040900@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=soren.brinkmann@xilinx.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.