All of lore.kernel.org
 help / color / mirror / Atom feed
From: gianluca <gianlucarenzi@eurek.it>
To: barebox@lists.infradead.org
Subject: Linux does not boot, unrecognized/unsupported machine ID (r1 = 0x00000000).
Date: Tue, 8 Mar 2016 10:18:07 +0100	[thread overview]
Message-ID: <56DE98CF.80104@eurek.it> (raw)

[-- Attachment #1: Type: text/plain, Size: 2413 bytes --]

Hello list,
here I am (again!) ;-)

Now I have downloaded the linux 4.5-rc6 (because I would like to use 
etnaviv gpu driver), configured as imx_v6_v7_defconfig, added the 
DEBUG_LL stuff for uart3 and added in the Makefile for dts my dts (more 
or less like Barebox one [in attachment] ), but here is what I get 
(compiling the kernel with DEBUG_LL for uart3):

> barebox 2016.02.0 #1 Mon Mar 7 13:15:11 CET 2016
>
>
> Board: EK360 Eurek i.MX6 Quad
> detected i.MX6 Quad revision 1.5
> mdio_bus: miibus0: probed
> imx-usb 2184200.usb: USB EHCI 1.00
> imx-esdhc 2194000.usdhc: registered as 2194000.usdhc
> imx-esdhc 2198000.usdhc: registered as 2198000.usdhc
> imx-esdhc 219c000.usdhc: registered as 219c000.usdhc
> imx-ipuv3 2400000.ipu: IPUv3H probed
> imx-ipuv3 2800000.ipu: IPUv3H probed
> netconsole: registered as netconsole-1
> malloc space: 0x2ff7c160 -> 0x4fef82bf (size 511.5 MiB)
> environment load /dev/env0: No such file or directory
> Maybe you have to create the partition.
> running /env/bin/init...
> mmc2: detected SD card version 2.0
> mmc2: registered mmc2
> ext4 ext40: EXT2 rev 1, inode_size 128
> Hit CTRL-C key to stop autoboot: 1
> Running boot from uSD/MMC or USB...
> Booting...
>     Image Name:   Linux-4.5.0-rc6-EK20160302
>     Created:      2016-03-07 12:30:32 UTC
>     OS:           Linux
>     Architecture: ARM
>     Type:         Kernel Image
>     Compression:  uncompressed
>     Data Size:    6636352 Bytes = 6.3 MiB
>     Load Address: 10008000
>     Entry Point:  10008000
>
> Loading U-Boot uImage '/mnt/uImage'
> Loading devicetree from '/mnt/dtb'
> commandline: console=ttymxc2,115200 rootwait noswap ip=none noinitrd rootfstype=nilfs2 root=/dev/mmcblk2p3 fec.macaddr=0x7a,0x3f,0x03,0xe3,0xa2,0xff
> Uncompressing Linux... done, booting the kernel.
>
> Error: unrecognized/unsupported machine ID (r1 = 0x00000000).
>
> Available machine support:
>
> ID (hex) NAME
> ffffffff Generic DT based system
> ffffffff Freescale i.MX6 Quad/DualLite (Device Tree)
>
> Please check your kernel config and/or bootloader.

It looks like something were wrong with devicetree or other machine 
identifier stuff...


Where is the issue???

Regards,
-- 
Eurek s.r.l.                          |
Electronic Engineering                | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy  | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377  | Fax:   +39-(0)542-609212

[-- Attachment #2: imx6q-eurek-ek360.dts --]
[-- Type: text/plain, Size: 7720 bytes --]

/*
 * $Id: imx6q-eurek-ek360.dts,v 1.5 2016/03/04 16:22:24 gianluca Exp $
 *
 * Copyright 2016 Gianluca Renzi, Eurek Elettronica S.R.L.
 * Copyright 2014 Raphaël Poggi
 * Copyright 2012 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "imx6q.dtsi"

/ {
	model = "EK360 Eurek i.MX6 Quad";
	compatible = "eurek,ek360", "fsl,imx6q";

	chosen {
		linux,stdout-path = &uart3;
	};

	memory {
		reg = <0x10000000 0x40000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_2p5v: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "2P5V";
			regulator-min-microvolt = <2500000>;
			regulator-max-microvolt = <2500000>;
			regulator-always-on;
		};

		reg_3p3v: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_otg_vbus: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
			enable-active-low;
		};

		reg_usb_h1_vbus: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
			enable-active-low;
		};
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	imx6q-ek380 {
		pinctrl_uart1: uart1grp {
			/* RS232 port */
			fsl,pins = <
				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			/* RS485 port */
			fsl,pins = <
				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
				/* UART2_DIR */
				MX6QDL_PAD_EIM_D18__GPIO3_IO18		0x80000000
			>;
		};

		pinctrl_uart3: uart3grp {
			/* debug port, serial console */
			fsl,pins = <
				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			/* SDIO / WiFi Module */
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD			0x17059
				MX6QDL_PAD_SD2_CLK__SD2_CLK			0x10059
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
				/* SD2_EN */
				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f071
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			/* uSD/MMC */
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
				/* SD3_CD */
				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1f071
				/* SD3_WP */
				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f071
			>;
		};

		pinctrl_usdhc4: usdhc4grp {
			/* eMMC */
			fsl,pins = <
				MX6QDL_PAD_SD4_CMD__SD4_CMD			0x17059
				MX6QDL_PAD_SD4_CLK__SD4_CLK			0x10059
				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
				MX6QDL_PAD_GPIO_3__I2C3_SCL			0x4001b8b1
			>;
		};

		pinctrl_usbotg_id: usbotggrp_id {
			fsl,pins = <
				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b0b0
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b0b0
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b0b0
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b0b0
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b0b0
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x1b0b0
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x1b0b0
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x1b0b0
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x1b0b0
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x1b0b0
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
				MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
				MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* KSZ9031 PHY Reset */
			>;
		};

		pinctrl_usbh1_oc: usbh1_oc {
			fsl,pins = <
				MX6QDL_PAD_EIM_D30__USB_H1_OC		0x00000000 /* USB_H1_OC Daisy = 0 default */
			>;
		};

		pinctrl_usbotg_oc: usbotg_oc {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x00000004 /* USB_OTG_OC ALT4 — Select signal USB_OTG_OC. */
			>;
		};

		pinctrl_hog: hog {
			fsl,pins = <
				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x80000000 /* USB OTG PWR EN */
				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x80000000 /* USB H1 PWR EN */
			>;
		};

	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii";
	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
	phy-reset-duration = <100>;
	status = "okay";
};

&uart1 {
	/* RS-232C Port */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	/* RS-485 Port */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	/* Debug port / console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
};

&usdhc2 {
	/* WiFi SDIO */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2>;
	status = "okay";
};

&usdhc3 {
	/* uSD / MMC */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc3>;
	cd-gpios = <&gpio2 0 0>;
	wp-gpios = <&gpio2 1 0>;
	status = "okay";
};

&usdhc4 {
	/* eMMC */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc4>;
	non-removable;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks 201>;
		VDDA-supply = <&reg_3p3v>;
		VDDIO-supply = <&reg_3p3v>;
	};

	at24@50 {
		compatible = "at24,24c64";
		pagesize = <64>;
		reg = <0x50>;
	};

	pcf8563: rtc@51 {
		compatible = "phg,pcf8563";
		reg = <0x51>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbh1_oc>;
	dr_mode = "host";
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg_oc
				&pinctrl_usbotg_id>;
	dr_mode = "otg";
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c2>;
	status = "okay";
};

[-- Attachment #3: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2016-03-08  9:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-08  9:18 gianluca [this message]
2016-03-09  7:42 ` Linux does not boot, unrecognized/unsupported machine ID (r1 = 0x00000000) Sascha Hauer
2016-03-10  8:57   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56DE98CF.80104@eurek.it \
    --to=gianlucarenzi@eurek.it \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.