[U-Boot] [PATCH v2] arm: imx: Add support for GE Bx50v3 boards

[Akshay Bhat <akshay.bhat@timesys.com>]

On 03/09/2016 06:47 AM, Stefano Babic wrote:
> On 29/01/2016 21:16, Akshay Bhat wrote:
>> Add support for GE B450v3, B650v3 and B850v3 boards. The boards
>> are based on Advantech BA16 module which has a i.MX6D processor.
>> The boards support:
>>   - FEC Ethernet
>>   - USB Ports
>>   - SDHC and MMC boot
>>   - SPI NOR
>>   - LVDS and HDMI display
>>
>> Basic information about the module:
>>   - Module manufacturer: Advantech
>>   - CPU: Freescale ARM Cortex-A9 i.MX6D
>>   - SPECS:
>>       Up to 2GB Onboard DDR3 Memory;
>>       Up to 16GB Onboard eMMC NAND Flash
>>       Supports OpenGL ES 2.0 and OpenVG 1.1
>>       HDMI, 24-bit LVDS
>>       1x UART, 2x I2C, 8x GPIO,
>>       4x Host USB 2.0 port, 1x USB OTG port,
>>       1x micro SD (SDHC),1x SDIO, 1x SATA II,
>>       1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
>>
>> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
>> ---
>
> Applied to -next, thanks !
>

Thank you very much for making -next happen. Appreciate it.