[U-Boot] [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver location

[Jagan Teki <jteki@openedev.com>]

On Thursday 10 March 2016 11:47 PM, Vikas MANOCHA wrote:
> Hi Jagan,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jteki at openedev.com]
>> Sent: Thursday, March 10, 2016 9:58 AM
>> To: Vikas MANOCHA
>> Cc: u-boot at lists.denx.de; Albert Aribaud; Antonio Borneo; Heiko Schocher;
>> Kamil Lulko; Matt Porter; rev13 at wp.pl; Scott Wood; Simon Glass; Stefan
>> Roese; Thomas Chou; Vadzim Dambrouski
>> Subject: Re: [RESEND 1/2] stm32: stm32f4: move flash driver to mtd driver
>> location
>>
>> On Thursday 10 March 2016 11:22 PM, Vikas MANOCHA wrote:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: Jagan Teki [mailto:jteki at openedev.com]
>>>> Sent: Thursday, March 10, 2016 9:46 AM
>>>> To: Vikas MANOCHA
>>>> Cc: u-boot at lists.denx.de; Albert Aribaud; Antonio Borneo; Heiko
>>>> Schocher; Kamil Lulko; Matt Porter; rev13 at wp.pl; Scott Wood; Simon
>>>> Glass; Stefan Roese; Thomas Chou; Vadzim Dambrouski
>>>> Subject: Re: [RESEND 1/2] stm32: stm32f4: move flash driver to mtd
>>>> driver location
>>>>
>>>> On Thursday 10 March 2016 11:11 PM, Vikas MANOCHA wrote:
>>>>> Hi Jagan,
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: jteki at openedev.com [mailto:jteki at openedev.com]
>>>>>> Sent: Wednesday, March 09, 2016 9:02 PM
>>>>>> To: Vikas MANOCHA
>>>>>> Cc: u-boot at lists.denx.de; Albert Aribaud; Antonio Borneo; Heiko
>>>>>> Schocher; Kamil Lulko; Matt Porter; rev13 at wp.pl; Scott Wood; Simon
>>>>>> Glass; Stefan Roese; Thomas Chou; Vadzim Dambrouski
>>>>>> Subject: Re: [RESEND 1/2] stm32: stm32f4: move flash driver to mtd
>>>>>> driver location
>>>>>>
>>>>>> On 2016-03-09 23:18, Vikas MANOCHA wrote:
>>>>>>> Hi Jagan ,
>>>>>>>
>>>>>>>> On Mar 9, 2016, at 6:53 PM, Jagan Teki <jteki@openedev.com>
>> wrote:
>>>>>>>>
>>>>>>>>> On Thursday 10 March 2016 04:48 AM, Vikas Manocha wrote:
>>>>>>>>> Same flash driver can be used by other stm32 families like stm32f7.
>>>>>>>>> Better place for this driver would be mtd driver location.
>>>>>>>>
>>>>>>>> What kind of flash is it, parallel or serial NOR?
>>>>>>>
>>>>>>> It is embedded 256 bit NOR flash.
>>>>>>
>>>>>> OK, I thought it's similar to SST25L.
>>>>>>
>>>>>> Can't we detect this through cfi_flash framework?
>>>>>
>>>>> No, it is not possible.
>>>>
>>>> Sorry, please add some details why it couldn't?
>>>
>>> The embedded flash in stm32 is not cfi flash. Cfi tables to find the flash
>> characteristics are not implemented.
>>
>> OK, all your saying that this not quite exactly a cfi, different kind wrt sst32.
>> true?
>
> Yes, flash is embedded in the stm32 micro & details like data width etc are not relevant for the user.
> Sst32  ? , sorry but I am not aware of it and sst32L.
>
>> then please convert this into MTD driver model format.
>>
>> If needed take an example of existing MTD uclass driver.
>
> Can you please point me to it ?

The board your using with this driver has fdt and dm support?

If so, it is quite straight forward, take an example of this 
drivers/mtd/altera_qspi.c

- register with MTD_UCLASS
- add your erase/write and read ops through mtd_ops