[U-Boot] [U-BOOT.V2] usb: xhci: Fix vendor command error if the request

[Marek Vasut <marex@denx.de>]

On 03/13/2016 10:53 AM, Anand Moon wrote:
> Hi Marek

Hi!

> Sorry for late replay.
> 
> On 6 March 2016 at 13:14, Marek Vasut <marex@denx.de> wrote:
>> On 03/05/2016 06:53 PM, Anand Moon wrote:
>>> Hi Marek,
>>
>> Hi!
>>
>>> On 5 March 2016 at 18:00, Marek Vasut <marex@denx.de> wrote:
>>>> On 03/05/2016 09:43 AM, Anand Moon wrote:
>>>>> From: Ted Chen <tedchen@realtek.com>
>>>>>
>>>>> From: Ted Chen <tedchen@realtek.com>
>>>>>
>>>>> type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION.
>>>>> To: marex at denx.de, swarren at nvidia.com, u-boot at lists.denx.de
>>>>> Cc: linux.amoon at gmail.com, Ted Chen <tedchen@realtek.com>
>>>>>
>>>>> Add a condition of set_address and set_configuration to check
>>>>> if the request is standardized.
>>>>
>>>> Can you please rephrase the commit message ? It's really hard to
>>>> understand. I believe such a patch will be needed for ehci as well,
>>>> can you prepare one ?
>>>
>>> I could not find any need for such check in ehci-hcd driver.
>>
>> Please explain why this is not needed.
> 
> I had give this a try but it failed to detect device connected to usb
> device connected to USB 2.0 port.
> But I will work on this and send a different patch.

So USB 2.0 code does need similar fix ?

>>> Sorry for this mess in commit message, I completely missed formatting
>>> the statement
>>> because of it got warped up in the message
>>> Will send this message again with proper commit message.
>>
>> Yes, the message is complete chaos.
>>
>>>>
>>>>> Signed-off-by: Ted Chen <tedchen@realtek.com>
>>>>> ---
>>>>> Resend this patch it some how got missed
>>>>> Changes since v1: None.
>>>>>
>>>>> Tested on Odroid XU4: with Ethernet USB3.0 RT8153-VB
>>>>> ---
>>>>>  drivers/usb/host/xhci.c | 6 ++++--
>>>>>  1 file changed, 4 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>>>>> index ca598aa..cb8a04b 100644
>>>>> --- a/drivers/usb/host/xhci.c
>>>>> +++ b/drivers/usb/host/xhci.c
>>>>> @@ -941,10 +941,12 @@ static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe,
>>>>>       if (usb_pipedevice(pipe) == ctrl->rootdev)
>>>>>               return xhci_submit_root(udev, pipe, buffer, setup);
>>>>>
>>>>> -     if (setup->request == USB_REQ_SET_ADDRESS)
>>>>> +     if (setup->request == USB_REQ_SET_ADDRESS &&
>>>>> +        (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD)
>>>>>               return xhci_address_device(udev, root_portnr);
>>>>>
>>>>> -     if (setup->request == USB_REQ_SET_CONFIGURATION) {
>>>>> +     if (setup->request == USB_REQ_SET_CONFIGURATION &&
>>>>> +        (setup->requesttype & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
>>>>>               ret = xhci_set_configuration(udev);
>>>>>               if (ret) {
>>>>>                       puts("Failed to configure xHCI endpoint\n");
>>>>>
>>>>
>>>> What happens to the non-standard requests ?
>>>>
>>> Device will not able to detect leaving message
>>> "scanning usb for ethernet devices... Non standard request in USB
>>> vendor command"
>>
>> Let me re-phrase, how are the non-standard requests handled ?
> 
> Note: With this patch such request are ignored.

This should be stated in the commit message for sure, thanks!

> I have tried various way to handle this situation but nothing work perfectly.

Got it.

Can you just update the commit message, send a V3 and let me pick it up?
Thanks!

>>>> --
>>>> Best regards,
>>>> Marek Vasut
>>>
>>> Here is the modified commit message
>>>
>>> "Add a condition of set_address and set_configuration to check
>>> if the requesttype is of standardized in the USB vendor request
>>> so that usb device is detected"
>>
>> Add test into xhci_submit_control_message for usb requesttype in USB
>> vendor request being of standardized type. This fixes detection of
>> certain USB fixes, for example <fill here>.
>>
> I will update the commit message.
>>> Do you agree with this modified commit statement.
>>>
>>> Best regards,
>>> -Anand Moon
>>>
>>
>>
>> --
>> Best regards,
>> Marek Vasut
> 
> OdroidXU4 development board 2 USB 3 port, 1 usb port and RTL8153
> Ethernet connected to USB 3.0.
> --------------------------------------------------------------------------------------------------------------------------------------------------
> 
> U-Boot 2016.03-rc3-01571-g76aab9e-dirty (Mar 13 2016 - 19:43:54 +1030)
> for ODROID-XU3
> 
> CPU:   Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type:  xu4
> DRAM:  2 GiB
> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> ODROID-XU3 #
> ODROID-XU3 #
> ODROID-XU3 #
> ODROID-XU3 # usb start
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> USB2:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... 2 USB Device(s) found
> scanning bus 2 for devices... 2 USB Device(s) found
>        scanning usb for ethernet devices... 1 Ethernet Device(s) found
> ODROID-XU3 # usb info
> 1: Hub,  USB Revision 2.0
>  - u-boot EHCI Host Controller
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> 
> 1: Hub,  USB Revision 3.0
>  - U-Boot XHCI Host Controller
>  - Class: Hub
>  - PacketSize: 9  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> 
> 2: Hub,  USB Revision 2.10
>  - GenesysLogic USB2.0 Hub
>  - Class: Hub
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x05e3  Product 0x0610 Version 146.34
>    Configuration: 1
>    - Interfaces: 1 Self Powered Remote Wakeup 100mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
>      - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
> 
> 1: Hub,  USB Revision 3.0
>  - U-Boot XHCI Host Controller
>  - Class: Hub
>  - PacketSize: 9  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Self Powered 0mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 1
>      - Class Hub
>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
> 
> 2: Vendor specific,  USB Revision 2.10
>  - Realtek USB 10/100/1000 LAN 000001000000
>  - Class: (from Interface) Vendor specific
>  - PacketSize: 64  Configurations: 2
>  - Vendor: 0x0bda  Product 0x8153 Version 48.0
>    Configuration: 1
>    - Interfaces: 1 Bus Powered Remote Wakeup 180mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 3
>      - Class Vendor specific
>      - Endpoint 1 In Bulk MaxPacket 512
>      - Endpoint 2 Out Bulk MaxPacket 512
>      - Endpoint 3 In Interrupt MaxPacket 2 Interval 8ms
> 
> ODROID-XU3 #
> 
> Best Regards
> -Anand Moon
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 


-- 
Best regards,
Marek Vasut