From: Xose Vazquez Perez <xose.vazquez@gmail.com>
To: Jes Sorensen <Jes.Sorensen@redhat.com>,
linux-wireless <linux-wireless@vger.kernel.org>
Subject: rtl8xxxu 4.4.5(from f23): I get a panic adding a new device to the driver
Date: Wed, 16 Mar 2016 00:42:10 +0100 [thread overview]
Message-ID: <56E89DD2.7000000@gmail.com> (raw)
Hi,
If I do:
# echo "0bda 8176" > /sys/bus/usb/drivers/rtl8xxxu/new_id
I get:
---dmesg---
usbcore: registered new interface driver rtl8xxxu
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa054bbf0>] rtl8xxxu_probe+0x810/0x22a0 [rtl8xxxu]
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: rtl8xxxu ccm snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_pcm_oss snd_mixer_oss arc4 intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp kvm_intel kvm ath9k ath9k_common ath9k_hw
irqbypass ath crct10dif_pclmul i915 crc32_pclmul crc32c_intel iTCO_wdt iTCO_vendor_support mac80211 snd_hda_codec_realtek cfg80211 snd_hda_codec_generic snd_usb_audio i2c_i801 snd_hda_intel
snd_hda_codec snd_hda_core snd_usbmidi_lib snd_rawmidi snd_hwdep snd_seq ses video i2c_algo_bit snd_seq_device drm_kms_helper enclosure lpc_ich drm snd_pcm rfkill snd_timer mei_me snd mei soundcore
shpchp tpm_tis tpm binfmt_misc hid_logitech_hidpp hid_logitech_dj serio_raw r8169 mii fjes uas usb_storage [last unloaded: rtlwifi]
CPU: 0 PID: 1233 Comm: bash Not tainted 4.4.5-300.fc23.x86_64 #1
Hardware name: Hewlett-Packard p6-2004es/2ABF, BIOS 7.16 03/23/2012
task: ffff88022d340000 ti: ffff8800b5c10000 task.ti: ffff8800b5c10000
RIP: 0010:[<ffffffffa054bbf0>] [<ffffffffa054bbf0>] rtl8xxxu_probe+0x810/0x22a0 [rtl8xxxu]
RSP: 0018:ffff8800b5c13bc0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 000000000000006a RCX: 0000000000005a32
RDX: 0000000000005a31 RSI: 0000000000000000 RDI: ffff8802346bb4c0
RBP: ffff8800b5c13c70 R08: 000000000001a1e0 R09: ffffffff81586bbb
R10: ffffea0002d65380 R11: 0000000000000000 R12: 00000000000000bf
R13: 00000000000000ff R14: ffff8802346bb4c0 R15: 00000000000000be
FS: 00007fe567227700(0000) GS:ffff88023f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000b5d9a000 CR4: 00000000000406f0
Stack:
ffff88022d340000 ffff8800b5c13be8 ffffffff812abf5a 00000000ffffffea
0000000000000000 ffff8800b5c13c18 0000000084b2960b ffff880232cfa090
ffff8802346ba700 ffff880233631400 ffff8802346bb53e 0000006300000246
Call Trace:
[<ffffffff812abf5a>] ? kernfs_activate+0x7a/0xe0
[<ffffffff8158b03d>] usb_probe_interface+0x1bd/0x300
[<ffffffff814ef252>] driver_probe_device+0x222/0x490
[<ffffffff814ef544>] __driver_attach+0x84/0x90
[<ffffffff814ef4c0>] ? driver_probe_device+0x490/0x490
[<ffffffff814ecd2c>] bus_for_each_dev+0x6c/0xc0
[<ffffffff814eea0e>] driver_attach+0x1e/0x20
[<ffffffff8158a33b>] usb_store_new_id+0xeb/0x1c0
[<ffffffff8158a432>] new_id_store+0x22/0x30
[<ffffffff814eca85>] drv_attr_store+0x25/0x30
[<ffffffff812ada77>] sysfs_kf_write+0x37/0x40
[<ffffffff812ad03d>] kernfs_fop_write+0x11d/0x170
[<ffffffff8122dbb7>] __vfs_write+0x37/0x110
[<ffffffff8124b3b3>] ? __fd_install+0x33/0xe0
[<ffffffff810ec982>] ? percpu_down_read+0x12/0x50
[<ffffffff8122e2c9>] vfs_write+0xa9/0x1a0
[<ffffffff8122ef85>] SyS_write+0x55/0xc0
[<ffffffff817a052e>] entry_SYSCALL_64_fastpath+0x12/0x71
Code: 44 89 f0 4d 89 fe 41 89 c7 66 41 81 ff ff 01 0f 86 6f ff ff ff 31 d2 be cf 00 00 00 4c 89 f7 e8 07 a5 ff ff 49 8b 46 10 4c 89 f7 <ff> 10 85 c0 41 89 c0 0f 85 89 03 00 00 49 8b 46 08 48 c7 c1 5b
RIP [<ffffffffa054bbf0>] rtl8xxxu_probe+0x810/0x22a0 [rtl8xxxu]
RSP <ffff8800b5c13bc0>
CR2: 0000000000000000
---[ end trace 0675ed7e0a2d84ed ]---
--rtl8192cu dmesg--
rtl8192cu: Chip version 0x10
rtl8192cu: MAC address: 00:e0:4c:07:dd:45
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
usbcore: registered new interface driver rtl8192cu
--end--
--lsusb-v--
Bus 002 Device 004: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x8176 RTL8188CUS 802.11n WLAN Adapter
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
--end--
Thanks.
next reply other threads:[~2016-03-15 23:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 23:42 Xose Vazquez Perez [this message]
2016-03-16 13:58 ` rtl8xxxu 4.4.5(from f23): I get a panic adding a new device to the driver Jes Sorensen
2016-03-17 18:02 ` Jes Sorensen
2016-03-17 20:01 ` poma
2016-03-17 20:11 ` Jes Sorensen
2016-03-17 20:42 ` Greg KH
2016-03-17 21:47 ` Jes Sorensen
2016-03-17 20:50 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56E89DD2.7000000@gmail.com \
--to=xose.vazquez@gmail.com \
--cc=Jes.Sorensen@redhat.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.