From: Christian Ege <k4230r6@gmail.com>
To: Yocto list discussion <yocto@yoctoproject.org>
Subject: Re: [master] ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot:
Date: Thu, 17 Mar 2016 05:44:11 +0100 [thread overview]
Message-ID: <56EA361B.9030600@gmail.com> (raw)
In-Reply-To: <CA+chaQeG5B_i1W7Z4--x9K71ctacSbjw-x7M35PeDThqkq+CKQ@mail.gmail.com>
Hi,
On 16.03.2016 20:44, Martin Jansa wrote:
> Delete your TMPDIR and start again.
thx, this did the trick
Best,
Christian
>
> On Wed, Mar 16, 2016 at 8:29 PM, Christian Ege <k4230r6@gmail.com
> <mailto:k4230r6@gmail.com>> wrote:
>
> Hi,
>
> with the latest master from today I ran in some trouble:
>
> Build Configuration:
> BB_VERSION = "1.29.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "universal"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "udooneo"
> DISTRO = "poky"
> DISTRO_VERSION = "2.0+snapshot-20160316"
> TUNE_FEATURES = "arm armv7a vfp thumb neon
> callconvention-hard cortexa9"
> TARGET_FPU = "hard"
> meta
> meta-poky = "HEAD:8debfea81e69d038bd2d56314b272cb74f5582ed"
> meta-oe
> meta-multimedia
> meta-python
> meta-networking = "HEAD:35d91f32c462ad5889cb3229766d6d4ed2c80a4c"
> meta-qt5 =
> "master-5.6:b2d5376b41625521b9a081fe800345fff33d8dd6"
> meta-ruby = "HEAD:35d91f32c462ad5889cb3229766d6d4ed2c80a4c"
> meta-fsl-arm = "HEAD:37564e6801ce82fad979b4f57151c676d80e8a6c"
> meta-fsl-arm-extra = "HEAD:36a638abe1238bdc8e0ef1242dd7bfab59cc48d7"
> meta-fsl-demos = "HEAD:6b779b2cb0d231063fc035a9a0871d722366c329"
> meta-udoo = "master:1b38bcec5057b93017a00f107e0738ce64ade66f"
> meta-swupdate = "master:44516e81a494afef3be7e3f249713fdec6e6e32a"
>
> NOTE: Preparing RunQueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: The recipe
> gobject-introspection is trying to install files into a shared area
> when those files already exist. Those files and their manifest
> location are:
>
> /data/FSL/fsl-community-bsp-master/build/tmp/sysroots/udooneo/usr/share/gobject-introspection-1.0/Makefile.introspection
> Matched in manifest-udooneo-gtk-doc-stub.populate_sysroot
> /data/FSL/fsl-community-bsp-master/build/tmp/sysroots/udooneo/usr/share/aclocal/introspection.m4
> Matched in manifest-udooneo-gtk-doc-stub.populate_sysroot
> Please verify which recipe should provide the above files.
> The build has stopped as continuing in this scenario WILL break
> things, if not now, possibly in the future (we've seen builds fail
> several months later). If the system knew how to recover from this
> automatically it would however there are several different scenarios
> which can result in this and we don't know which one this is. It may
> be you have switched providers of something like virtual/kernel (e.g.
> from linux-yocto to linux-yocto-dev), in that case you need to execute
> the clean task for both recipes and it will resolve this error. It may
> be you changed DISTRO_FEATURES from systemd to udev or vice versa.
> Cleaning those recipes should again resolve this error however
> switching DISTRO_FEATURES on an existing build directory is not
> supported, you should really clean out tmp and rebuild (reusing sstate
> should be safe). It could be the overlapping files detected are
> harmless in which case adding them to SSTATE_DUPWHITELIST may be the
> correct solution. It could also be your build is including two
> different conflicting versions of things (e.g. bluez 4 and bluez 5 and
> the correct solution for that would be to resolve the conflict. If in
> doubt, please ask on the mailing list, sharing the error and filelist
> above.
> ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: If the
> above message is too much, the simpler version is you're advised to
> wipe out tmp and rebuild (reusing sstate is fine). That will likely
> fix things in most (but not all) cases.
> ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: Function
> failed: sstate_task_postfunc
> ERROR: Logfile of failure stored in:
> /data/FSL/fsl-community-bsp-master/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/gobject-introspection/1.46.0-r0/temp/log.do_populate_sysroot.16494
> ERROR: Task 1802
> (/data/FSL/fsl-community-bsp-master/sources/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.46.0.bb
> <http://gobject-introspection_1.46.0.bb>,
> do_populate_sysroot) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 4772 tasks of which 4742 didn't need to
> be rerun and 1 failed.
> No currently running tasks (4772 of 5254)
>
>
> Any help is appreciated.
>
> Best,
> Christian
>
> --
> http://ch.ege.io/
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/yocto
>
>
prev parent reply other threads:[~2016-03-17 4:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-16 19:29 [master] ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: Christian Ege
2016-03-16 19:44 ` Martin Jansa
2016-03-17 4:44 ` Christian Ege [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56EA361B.9030600@gmail.com \
--to=k4230r6@gmail.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.