diff for duplicates of <56EAC68E.4040103@de.bosch.com> diff --git a/a/1.txt b/N1/1.txt index b9e9f4f..58fdffd 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ Am 03/17/2016 um 08:59 AM schrieb Sascha Hauer: > On Tue, Mar 15, 2016 at 02:24:36PM +0100, Dirk Behme wrote: ->> > From: Knut Wohlrab <knut.wohlrab-V5te9oGctAVWk0Htik3J/w@public.gmane.org> +>> > From: Knut Wohlrab <knut.wohlrab@de.bosch.com> >> > >> > If the SPI chip select (CS) for a dedicated channel is done manually by >> > the used higher device driver, the CS may be active while writing to @@ -13,7 +13,7 @@ Am 03/17/2016 um 08:59 AM schrieb Sascha Hauer: >> > driver of this channel. This will set the clock mode to the correct state. > The patch does the right thing, so: > -> Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> +> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> > > Only the above sentence is not clear to me. By device driver you mean > the SPI slave driver (flash, PMIC), right? Isn't this what @@ -36,7 +36,3 @@ edge is destroying the data transfer. Thanks and regards Knut --- -To unsubscribe from this list: send the line "unsubscribe linux-spi" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 4bb1f53..18f11c5 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,20 +1,14 @@ "ref\01458048276-31884-1-git-send-email-dirk.behme@de.bosch.com\0" "ref\020160317075911.GV30994@pengutronix.de\0" - "ref\020160317075911.GV30994-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org\0" - "From\0Knut Wohlrab <knut.wohlrab-V5te9oGctAVWk0Htik3J/w@public.gmane.org>\0" - "Subject\0Re: [PATCH] spi: imx: only do necessary changes to ECSPIx_CONFIGREG\0" + "From\0knut.wohlrab@de.bosch.com (Knut Wohlrab)\0" + "Subject\0[PATCH] spi: imx: only do necessary changes to ECSPIx_CONFIGREG\0" "Date\0Thu, 17 Mar 2016 16:00:30 +0100\0" - "To\0Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>" - " Dirk Behme <dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org>\0" - "Cc\0<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>" - <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - Vladimir Zapolskiy <vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org> - " Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Am 03/17/2016 um 08:59 AM schrieb Sascha Hauer:\n" "> On Tue, Mar 15, 2016 at 02:24:36PM +0100, Dirk Behme wrote:\n" - ">> > From: Knut Wohlrab <knut.wohlrab-V5te9oGctAVWk0Htik3J/w@public.gmane.org>\n" + ">> > From: Knut Wohlrab <knut.wohlrab@de.bosch.com>\n" ">> > \n" ">> > If the SPI chip select (CS) for a dedicated channel is done manually by\n" ">> > the used higher device driver, the CS may be active while writing to\n" @@ -27,7 +21,7 @@ ">> > driver of this channel. This will set the clock mode to the correct state.\n" "> The patch does the right thing, so:\n" "> \n" - "> Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>\n" + "> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>\n" "> \n" "> Only the above sentence is not clear to me. By device driver you mean\n" "> the SPI slave driver (flash, PMIC), right? Isn't this what\n" @@ -49,10 +43,6 @@ "\n" "Thanks and regards\n" "\n" - "Knut\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe linux-spi\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Knut -945770e51f1e6ebd59413aff642da483bd9b1562a984bf66cf15f17592df2b15 +6c2972e4695e1d58cc36263ae4d4809434b614075a1bff287410218c12e828dd
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.