All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Youn <John.Youn@synopsys.com>
To: Przemek Rudy <prudy1@o2.pl>,
	"John.Youn@synopsys.com" <John.Youn@synopsys.com>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb: dwc2: do not override forced dr_mode in gadget setup
Date: Thu, 24 Mar 2016 14:21:37 -0700	[thread overview]
Message-ID: <56F45A61.3060006@synopsys.com> (raw)
In-Reply-To: <1458166226-14983-1-git-send-email-prudy1@o2.pl>

On 3/16/2016 3:10 PM, Przemek Rudy wrote:
> The host/device mode set with dr_mode should be kept all the time,
> not being changed to OTG in gadget setup (by overriding CFGUSB_FORCEDEVMODE
> and CFGUSB_FORCEHOSTMODE bits).
> 
> Signed-off-by: Przemek Rudy <prudy1@o2.pl>
> ---
>  drivers/usb/dwc2/gadget.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index e9940dd..818f158 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -2254,6 +2254,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
>  {
>  	u32 intmsk;
>  	u32 val;
> +	u32 usbcfg;
>  
>  	/* Kill any ep0 requests as controller will be reinitialized */
>  	kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
> @@ -2267,10 +2268,16 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
>  	 * set configuration.
>  	 */
>  
> +	/* keep other bits untouched (so e.g. forced modes are not lost) */
> +	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> +	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> +		GUSBCFG_HNPCAP);
> +
>  	/* set the PLL on, remove the HNP/SRP and set the PHY */
>  	val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> -	dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> -	       (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
> +	usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> +		(val << GUSBCFG_USBTRDTIM_SHIFT);
> +	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>  
>  	dwc2_hsotg_init_fifo(hsotg);
>  
> @@ -3031,6 +3038,7 @@ static struct usb_ep_ops dwc2_hsotg_ep_ops = {
>  static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
>  {
>  	u32 trdtim;
> +	u32 usbcfg;
>  	/* unmask subset of endpoint interrupts */
>  
>  	dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
> @@ -3054,11 +3062,16 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
>  
>  	dwc2_hsotg_init_fifo(hsotg);
>  
> +	/* keep other bits untouched (so e.g. forced modes are not lost) */
> +	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
> +	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
> +		GUSBCFG_HNPCAP);
> +
>  	/* set the PLL on, remove the HNP/SRP and set the PHY */
>  	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
> -	dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> -		(trdtim << GUSBCFG_USBTRDTIM_SHIFT),
> -		hsotg->regs + GUSBCFG);
> +	usbcfg |= hsotg->phyif | GUSBCFG_TOUTCAL(7) |
> +		(trdtim << GUSBCFG_USBTRDTIM_SHIFT);
> +	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
>  
>  	if (using_dma(hsotg))
>  		__orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
> 


Acked-by: John Youn <johnyoun@synopsys.com>
Tested-by: John Youn <johnyoun@synopsys.com>

Regards,
John
 

  reply	other threads:[~2016-03-24 21:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-16 22:10 [PATCH] usb: dwc2: do not override forced dr_mode in gadget setup Przemek Rudy
2016-03-24 21:21 ` John Youn [this message]
2016-03-30 10:15   ` Felipe Balbi
2016-03-30 15:08     ` Przemek Rudy
2016-03-30 22:47       ` John Youn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56F45A61.3060006@synopsys.com \
    --to=john.youn@synopsys.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=prudy1@o2.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.