Re: [PATCH] usb: gadget: fsl_udc_core: Fix pullup status

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 3/25/2016 2:14 AM, Dmitry Osipenko wrote:

> udc->softconnect should be set regardless of the VBUS state, otherwise
> the USB peripheral device, connected during suspend, won't be detected
> since can_pullup() would return false the UDC controller won't be enabled.
>
> Fixes: 252455c40316 (usb: gadget: fsl driver pullup fix)
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>   drivers/usb/gadget/udc/fsl_udc_core.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
> index aab5221..118cf7a 100644
> --- a/drivers/usb/gadget/udc/fsl_udc_core.c
> +++ b/drivers/usb/gadget/udc/fsl_udc_core.c
> @@ -1220,10 +1220,11 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
>
>   	udc = container_of(gadget, struct fsl_udc, gadget);
>
> +	udc->softconnect = (is_on != 0);

    !!is_on? Parens not needed anyway though.

> +
>   	if (!udc->vbus_active)
>   		return -EOPNOTSUPP;
>
> -	udc->softconnect = (is_on != 0);
>   	if (can_pullup(udc))
>   		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
>   				&dr_regs->usbcmd);

MBR, Sergei