From mboxrd@z Thu Jan 1 00:00:00 1970 References: <56E5F4B4.9030807@googlemail.com> From: Philippe Gerum Message-ID: <56F8FD2B.6060502@xenomai.org> Date: Mon, 28 Mar 2016 11:45:15 +0200 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Xenomai-3.0.1 with raspberry pi List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Nicolas SCHURANDO , Mathieu Rondonneau Cc: xenomai@xenomai.org On 03/21/2016 04:41 PM, Nicolas SCHURANDO wrote: > Thanks Mathieu for the reminder. I had bookmarked Philippe's new year > message introducing the specific vendor branch, but in the interval I > somehow forgot it existed. > > I was able to produce a working Xenomai 3.0 image for the Raspberry Pi 1 > using the bcmrpi_defconfig as a base. It seems stable so far. > > However, when using bcm2709_defconfig, the generated kernel won't boot on a > Raspberry Pi 2, leaving me with the initial rainbow screen. > > Philippe, have you had any feedback from people testing on the Raspberry Pi > 2 yet ? > Sorry, this message was buried in a bottomless log. I received no feedback regarding this specific target. The original work was aimed at porting to the RPI Zero, which is the only target I have tested so far. Other changes are untested by-products of that work, which should be considered as a template for porting to other RPI SBCs based on the bcm270x families. -- Philippe.