Hi Nishanth,

On 03/30/2016 11:25 PM, Nishanth V wrote:
> ---
>   Makefile.am                |  3 ++-
>   test/get-serving-cell-info | 56 ++++++++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 58 insertions(+), 1 deletion(-)
>   create mode 100644 test/get-serving-cell-info
>

I went ahead and applied this one, but...

> diff --git a/Makefile.am b/Makefile.am
> index ce4c107..5cd9766 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -744,7 +744,8 @@ test_scripts = test/backtrace \
>   		test/register-auto \
>   		test/register-operator \
>   		test/set-sms-smsc \
> -		test/set-sms-bearer
> +		test/set-sms-bearer \
> +		test/get-serving-cell-info
>
>   if TEST
>   testdir = $(pkglibdir)/test
> diff --git a/test/get-serving-cell-info b/test/get-serving-cell-info
> new file mode 100644
> index 0000000..05dc9fe
> --- /dev/null
> +++ b/test/get-serving-cell-info
> @@ -0,0 +1,56 @@
> +#!/usr/bin/python3
> +
> +import dbus
> +
> +bus = dbus.SystemBus()
> +
> +manager = dbus.Interface(bus.get_object('org.ofono', '/'), 'org.ofono.Manager')
> +
> +modems = manager.GetModems()
> +path = modems[0][0]
> +

Can you please add some way to select the modem to use?  Many developers 
run multiple modems (e.g. phonesim, stktest + real hardware ones), so 
scripts assuming that the first modem is the target is inconvenient.

See test/set-sms-bearer that Anirudh did for an example. Or test/send-sms

> +monitor = dbus.Interface(bus.get_object('org.ofono', path),
> +						'org.ofono.NetworkMonitor')
> +
> +try:
> +	servingcell = monitor.GetServingCellInformation()
> +except dbus.DBusException as e:
> +	print("Unable to get serving cell information")
> +	exit()
> +
> +tech = 'Technology'
> +mcc = 'MobileCountryCode'
> +mnc = 'MobileNetworkCode'
> +lac = 'LocationAreaCode'
> +cid = 'CellId'
> +psc = 'PrimaryScramblingCode'
> +rssi = 'Strength'
> +ber = 'BitErrorRate'
> +
> +print("Current serving cell information:")
> +
> +if tech in servingcell:
> +	print("    [ Radio Access Technology = %s]" % (servingcell[tech]))
> +
> +if mcc in servingcell:
> +	print("    [ Mobile Country Code = %s]" % (servingcell[mcc]))
> +
> +if mnc in servingcell:
> +	print("    [ Mobile Network Code = %s]" % (servingcell[mnc]))
> +
> +if lac in servingcell:
> +	print("    [ Location Area Code = %d]" % (servingcell[lac]))
> +
> +if cid in servingcell:
> +	print("    [ Cell Identity = %d]" % (servingcell[cid]))
> +
> +if psc in servingcell:
> +	print("    [ Primary Scrambling Code = %d]" % (servingcell[psc]))
> +
> +if rssi in servingcell:
> +	print("    [ Signal Strength = %d]" % (servingcell[rssi]))
> +
> +if ber in servingcell:
> +	print("    [ Bit Error Rate = %d]" % (servingcell[ber]))
> +
> +print('')
>

Regards,
-Denis