All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Date: Wed, 06 Apr 2016 00:06:48 +0200	[thread overview]
Message-ID: <570436F8.5040507@denx.de> (raw)
In-Reply-To: <1459881109-25259-1-git-send-email-srae@broadcom.com>

On 04/05/2016 08:31 PM, Steve Rae wrote:
> commit 9e4b510 fastboot: OUT transaction length must be aligned to wMaxPacketSize
> breaks some boards...
> 
> Therefore add a conditional Kconfig to optionally enable this feature.

Did you drill into it to figure out why this is needed ?

> Signed-off-by: Steve Rae <srae@broadcom.com>
> ---
> 
> Changes in v2:
> - ammendment to the original patch
> 
>  drivers/usb/gadget/Kconfig      | 7 +++++++
>  drivers/usb/gadget/f_fastboot.c | 4 +++-
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index f4698f4..ab1c605 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -33,3 +33,10 @@ menuconfig USB_GADGET
>  	   a USB peripheral device.  Configure one hardware driver for your
>  	   peripheral/device side bus controller, and a "gadget driver" for
>  	   your peripheral protocol.
> +
> +config USB_GADGET_FASTBOOT_DOWNLOAD_ALIGNMENT_REQUIRED
> +	bool "fastboot download requires alignment with wMaxPacketSize"
> +	help
> +	   By default, the fastboot download OUT transactions are aligned
> +	   to "ep->maxpacket". This option causes the fastboot download OUT
> +	   transactions to be aligned with "wMaxPacketSize".
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 2e87fee..130b5d0 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -430,17 +430,19 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req)
>  static unsigned int rx_bytes_expected(unsigned int maxpacket)
>  {
>  	int rx_remain = download_size - download_bytes;
> -	int rem = 0;
> +	int __maybe_unused rem = 0;
>  	if (rx_remain < 0)
>  		return 0;
>  	if (rx_remain > EP_BUFFER_SIZE)
>  		return EP_BUFFER_SIZE;
> +#ifdef CONFIG_USB_GADGET_FASTBOOT_DOWNLOAD_ALIGNMENT_REQUIRED
>  	if (rx_remain < maxpacket) {
>  		rx_remain = maxpacket;
>  	} else if (rx_remain % maxpacket != 0) {
>  		rem = rx_remain % maxpacket;
>  		rx_remain = rx_remain + (maxpacket - rem);
>  	}
> +#endif
>  	return rx_remain;
>  }
>  
> 


-- 
Best regards,
Marek Vasut

  reply	other threads:[~2016-04-05 22:06 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-05 18:31 [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize Steve Rae
2016-04-05 22:06 ` Marek Vasut [this message]
2016-04-06  5:35   ` Steve Rae
2016-04-06  7:09     ` Lukasz Majewski
2016-04-06 10:57       ` Marek Vasut
2016-04-06 11:01     ` Marek Vasut
2016-04-06 17:18       ` Steve Rae
2016-04-06 19:53         ` Marek Vasut
2016-04-06 20:45           ` Steve Rae
2016-04-06 20:57             ` Marek Vasut
2016-04-07  8:03               ` Lukasz Majewski
2016-04-07  7:36         ` Lukasz Majewski
2016-04-07 16:46           ` Sam Protsenko
2016-04-07 17:07             ` Steve Rae
2016-04-07 21:16               ` Sam Protsenko
2016-04-07 21:39                 ` Steve Rae
2016-04-07 23:11                   ` Sam Protsenko
2016-04-07 23:15                     ` Steve Rae
2016-04-08 19:44                     ` Tom Rini
2016-04-11 12:29                       ` B, Ravi
2016-04-07 18:40             ` Marek Vasut
2016-04-11 11:34               ` Mugunthan V N
2016-04-11 15:22                 ` Tom Rini
2016-04-12 11:19                   ` Lukasz Majewski
2016-04-12 12:40                     ` Roger Quadros
2016-04-12 13:37                       ` Lukasz Majewski
2016-04-12 13:50                         ` Roger Quadros
2016-04-13  1:55                           ` Steve Rae
2016-04-14 11:15                             ` Roger Quadros
2016-04-15 19:56                               ` Steve Rae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570436F8.5040507@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.