From: Christian Steiner <christian.steiner@outlook.de>
To: linux-media@vger.kernel.org
Cc: olli.salonen@iki.fi
Subject: Re: [PATCH] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner
Date: Sun, 10 Apr 2016 17:23:25 +0200 [thread overview]
Message-ID: <570A6FED.4090700@outlook.de> (raw)
In-Reply-To: <1459782772-21451-1-git-send-email-olli.salonen@iki.fi>
On 04.04.2016 17:12, Olli Salonen wrote:
> Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with
> following components:
>
> USB bridge: Empia EM28274 (chip id is the same as EM28174)
> Demodulator: 2x Silicon Labs Si2168-B40
> Tuner: 2x Silicon Labs Si2157-A30
>
> This patch adds support only for the first tuner.
>
> [...]
Thank you very much!
Works fine for me:
> [ 419.413188] em28xx: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0)
> [ 419.413195] em28xx: DVB interface 0 found: isoc
> [ 419.413265] em28xx: chip ID is em28174
> [ 420.529619] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x7addc1c8
> [ 420.529626] em28174 #0: EEPROM info:
> [ 420.529630] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01
> [ 420.536077] em28174 #0: AC97 audio (5 sample rates)
> [ 420.536084] em28174 #0: 500mA max power
> [ 420.536089] em28174 #0: Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
> [ 420.536188] em28174 #0: Identified as Hauppauge WinTV-dualHD DVB (card=98)
> [ 420.537974] tveeprom 8-0050: Hauppauge model 204109, rev B2I6, serial# 11XXXXXX
> [ 420.537981] tveeprom 8-0050: tuner model is SiLabs Si2157 (idx 186, type 4)
> [ 420.537986] tveeprom 8-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
> [ 420.537989] tveeprom 8-0050: audio processor is None (idx 0)
> [ 420.537993] tveeprom 8-0050: has no radio, has IR receiver, has no IR transmitter
> [ 420.537997] em28174 #0: dvb set to isoc mode.
> [ 420.538056] usbcore: registered new interface driver em28xx
> [ 420.541087] em28174 #0: Binding DVB extension
> [ 420.544008] i2c i2c-8: Added multiplexed i2c bus 9
> [ 420.544016] si2168 8-0064: Silicon Labs Si2168 successfully attached
> [ 420.548372] si2157 9-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
> [ 420.548389] DVB: registering new adapter (em28174 #0)
> [ 420.548396] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
> [ 420.549737] em28174 #0: DVB extension successfully initialized
> [ 420.549743] em28xx: Registered (Em28xx dvb Extension) extension
> [ 435.418798] si2168 8-0064: found a 'Silicon Labs Si2168-B40'
> [ 435.418823] si2168 8-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
> [ 435.617181] si2168 8-0064: firmware version: 4.0.11
> [ 435.619791] si2157 9-0060: found a 'Silicon Labs Si2157-A30'
> [ 435.642006] si2157 9-0060: firmware version: 3.0.5
(I have replaced the last digits of the serial number with X)
Is there any chance to add support for the second tuner, too?
This would be awesome.
Best,
Christian
next prev parent reply other threads:[~2016-04-11 8:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 15:12 [PATCH] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner Olli Salonen
2016-04-10 15:23 ` Christian Steiner [this message]
[not found] ` <CAAZRmGy1=8UXe0WqpucCt0qUfZQS+NHsHYmAq3yKu_pxK38yTw@mail.gmail.com>
2016-04-11 9:14 ` Fwd: " Olli Salonen
2017-05-27 15:38 ` Christian Steiner
2017-05-31 20:01 ` Brad Love
2017-09-07 14:52 ` Mauro Carvalho Chehab
2017-09-09 2:09 ` Brad Love
2016-04-10 15:23 ` Christian Steiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570A6FED.4090700@outlook.de \
--to=christian.steiner@outlook.de \
--cc=linux-media@vger.kernel.org \
--cc=olli.salonen@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.