From: Arun Siluvery <arun.siluvery@linux.intel.com>
To: tim.gore@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v4] drm/i915: implement WaClearTdlStateAckDirtyBits
Date: Mon, 11 Apr 2016 11:02:56 +0100 [thread overview]
Message-ID: <570B7650.3010304@linux.intel.com> (raw)
In-Reply-To: <1458571049-854-1-git-send-email-tim.gore@intel.com>
On 21/03/2016 14:37, tim.gore@intel.com wrote:
> From: Tim Gore <tim.gore@intel.com>
>
> This is to fix a GPU hang seen with mid thread pre-emption
> and pooled EUs.
>
> v2. Use IS_BXT_REVID instead of IS_BROXTON and INTEL_REVID
>
> v3. And use correct type for register addresses
>
> Signed-off-by: Tim Gore <tim.gore@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 12 ++++++++++++
> drivers/gpu/drm/i915/intel_lrc.c | 19 +++++++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 06fb589..c54190b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1783,6 +1783,18 @@ enum skl_disp_power_wells {
> #define GEN9_IZ_HASHING_MASK(slice) (0x3 << ((slice) * 2))
> #define GEN9_IZ_HASHING(slice, val) ((val) << ((slice) * 2))
>
> +/* WaClearTdlStateAckDirtyBits */
> +#define GEN8_STATE_ACK _MMIO(0x20F0)
> +#define GEN9_STATE_ACK_SLICE1 _MMIO(0x20F8)
> +#define GEN9_STATE_ACK_SLICE2 _MMIO(0x2100)
> +#define GEN9_STATE_ACK_TDL0 (1 << 12)
> +#define GEN9_STATE_ACK_TDL1 (1 << 13)
> +#define GEN9_STATE_ACK_TDL2 (1 << 14)
> +#define GEN9_STATE_ACK_TDL3 (1 << 15)
> +#define GEN9_SUBSLICE_TDL_ACK_BITS \
> + (GEN9_STATE_ACK_TDL3 | GEN9_STATE_ACK_TDL2 | \
> + GEN9_STATE_ACK_TDL1 | GEN9_STATE_ACK_TDL0)
> +
> #define GFX_MODE _MMIO(0x2520)
> #define GFX_MODE_GEN7 _MMIO(0x229c)
> #define RING_MODE_GEN7(ring) _MMIO((ring)->mmio_base+0x29c)
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 3a23b95..b6dcd4d 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1450,6 +1450,25 @@ static int gen9_init_perctx_bb(struct intel_engine_cs *engine,
> wa_ctx_emit(batch, index, MI_NOOP);
> }
>
> + /* WaClearTdlStateAckDirtyBits:bxt */
> + if (IS_BXT_REVID(dev, 0, BXT_REVID_B0)) {
> + wa_ctx_emit(batch, index, MI_LOAD_REGISTER_IMM(4));
> +
> + wa_ctx_emit_reg(batch, index, GEN8_STATE_ACK);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN9_STATE_ACK_SLICE1);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN9_STATE_ACK_SLICE2);
> + wa_ctx_emit(batch, index, _MASKED_BIT_DISABLE(GEN9_SUBSLICE_TDL_ACK_BITS));
> +
> + wa_ctx_emit_reg(batch, index, GEN7_ROW_CHICKEN2);
> + /* dummy write to CS, mask bits are 0 to ensure the register is not modified */
> + wa_ctx_emit(batch, index, 0x0);
> + wa_ctx_emit(batch, index, MI_NOOP);
> + }
> +
> /* WaDisableCtxRestoreArbitration:skl,bxt */
> if (IS_SKL_REVID(dev, 0, SKL_REVID_D0) ||
> IS_BXT_REVID(dev, 0, BXT_REVID_A1))
>
sorry for the delay, it looks good to me,
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
regards
Arun
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2016-04-11 10:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 14:37 [PATCH v4] drm/i915: implement WaClearTdlStateAckDirtyBits tim.gore
2016-03-22 7:32 ` ✗ Fi.CI.BAT: warning for drm/i915: implement WaClearTdlStateAckDirtyBits (rev3) Patchwork
2016-04-11 11:17 ` Tvrtko Ursulin
2016-04-11 10:02 ` Arun Siluvery [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570B7650.3010304@linux.intel.com \
--to=arun.siluvery@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tim.gore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.