Re: [PATCH net-next 6/7] dsa: Rename phys_port_mask to user_port_mask

[Florian Fainelli <f.fainelli@gmail.com>]

On 11/04/16 12:50, Andrew Lunn wrote:
> The phys in phys_port_mask suggests this mask is about PHYs. In fact,
> it means physical ports. Rename to user_port_mask, indicating user
> ports of the switch, which is hopefully less confusing.

Even though the change looks fine in principle, I am more worried about
the difficulty for people to backport fixes because of the renaming
happening here. How about "enabled_ports_mask" as a name? Did not
Guenter had a helper function at some point which tested for (1 << port
& ds->phys_port_mask)?

> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
>  drivers/net/dsa/bcm_sf2.c   | 10 +++++-----
>  drivers/net/dsa/mv88e6060.c |  2 +-
>  include/net/dsa.h           |  4 ++--
>  net/dsa/dsa.c               |  8 ++++----
>  4 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
> index 50caa525cda3..e1e8070fb9f9 100644
> --- a/drivers/net/dsa/bcm_sf2.c
> +++ b/drivers/net/dsa/bcm_sf2.c
> @@ -160,7 +160,7 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
>  	 * the same VLAN.
>  	 */
>  	for (i = 0; i < priv->hw_params.num_ports; i++) {
> -		if (!((1 << i) & ds->phys_port_mask))
> +		if (!((1 << i) & ds->user_port_mask))
>  			continue;
>  
>  		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
> @@ -1009,7 +1009,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
>  	/* Enable all valid ports and disable those unused */
>  	for (port = 0; port < priv->hw_params.num_ports; port++) {
>  		/* IMP port receives special treatment */
> -		if ((1 << port) & ds->phys_port_mask)
> +		if ((1 << port) & ds->user_port_mask)
>  			bcm_sf2_port_setup(ds, port, NULL);
>  		else if (dsa_is_cpu_port(ds, port))
>  			bcm_sf2_imp_setup(ds, port);
> @@ -1022,7 +1022,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
>  	 * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such
>  	 * that we can use the regular SWITCH_MDIO master controller instead.
>  	 *
> -	 * By default, DSA initializes ds->phys_mii_mask to ds->phys_port_mask
> +	 * By default, DSA initializes ds->phys_mii_mask to ds->user_port_mask
>  	 * to have a 1:1 mapping between Port address and PHY address in order
>  	 * to utilize the slave_mii_bus instance to read from Port PHYs. This is
>  	 * not what we want here, so we initialize phys_mii_mask 0 to always
> @@ -1284,7 +1284,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
>  	 * bcm_sf2_sw_setup
>  	 */
>  	for (port = 0; port < DSA_MAX_PORTS; port++) {
> -		if ((1 << port) & ds->phys_port_mask ||
> +		if ((1 << port) & ds->user_port_mask ||
>  		    dsa_is_cpu_port(ds, port))
>  			bcm_sf2_port_disable(ds, port, NULL);
>  	}
> @@ -1308,7 +1308,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
>  		bcm_sf2_gphy_enable_set(ds, true);
>  
>  	for (port = 0; port < DSA_MAX_PORTS; port++) {
> -		if ((1 << port) & ds->phys_port_mask)
> +		if ((1 << port) & ds->user_port_mask)
>  			bcm_sf2_port_setup(ds, port, NULL);
>  		else if (dsa_is_cpu_port(ds, port))
>  			bcm_sf2_imp_setup(ds, port);
> diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
> index adb608ccd9aa..0ba0d413cf73 100644
> --- a/drivers/net/dsa/mv88e6060.c
> +++ b/drivers/net/dsa/mv88e6060.c
> @@ -170,7 +170,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
>  	REG_WRITE(addr, PORT_VLAN_MAP,
>  		  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
>  		   (dsa_is_cpu_port(ds, p) ?
> -			ds->phys_port_mask :
> +			ds->user_port_mask :
>  			BIT(ds->dst->cpu_port)));
>  
>  	/* Port Association Vector: when learning source addresses
> diff --git a/include/net/dsa.h b/include/net/dsa.h
> index 165c2e10615c..b36c2a5c206f 100644
> --- a/include/net/dsa.h
> +++ b/include/net/dsa.h
> @@ -167,7 +167,7 @@ struct dsa_switch {
>  	 * Slave mii_bus and devices for the individual ports.
>  	 */
>  	u32			dsa_port_mask;
> -	u32			phys_port_mask;
> +	u32			user_port_mask;
>  	u32			phys_mii_mask;
>  	struct mii_bus		*slave_mii_bus;
>  	struct net_device	*ports[DSA_MAX_PORTS];
> @@ -185,7 +185,7 @@ static inline bool dsa_is_dsa_port(struct dsa_switch *ds, int p)
>  
>  static inline bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
>  {
> -	return ds->phys_port_mask & (1 << p) && ds->ports[p];
> +	return ds->user_port_mask & (1 << p) && ds->ports[p];
>  }
>  
>  static inline u8 dsa_upstream_port(struct dsa_switch *ds)
> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
> index 14bf12f637d2..20293d1a5a93 100644
> --- a/net/dsa/dsa.c
> +++ b/net/dsa/dsa.c
> @@ -246,7 +246,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
>  		} else if (!strcmp(name, "dsa")) {
>  			ds->dsa_port_mask |= 1 << i;
>  		} else {
> -			ds->phys_port_mask |= 1 << i;
> +			ds->user_port_mask |= 1 << i;
>  		}
>  		valid_name_found = true;
>  	}
> @@ -259,7 +259,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
>  	/* Make the built-in MII bus mask match the number of ports,
>  	 * switch drivers can override this later
>  	 */
> -	ds->phys_mii_mask = ds->phys_port_mask;
> +	ds->phys_mii_mask = ds->user_port_mask;
>  
>  	/*
>  	 * If the CPU connects to this switch, set the switch tree
> @@ -325,7 +325,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
>  	 * Create network devices for physical switch ports.
>  	 */
>  	for (i = 0; i < DSA_MAX_PORTS; i++) {
> -		if (!(ds->phys_port_mask & (1 << i)))
> +		if (!(ds->user_port_mask & (1 << i)))
>  			continue;
>  
>  		ret = dsa_slave_create(ds, parent, i, pd->port_names[i]);
> @@ -435,7 +435,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
>  
>  	/* Destroy network devices for physical switch ports. */
>  	for (port = 0; port < DSA_MAX_PORTS; port++) {
> -		if (!(ds->phys_port_mask & (1 << port)))
> +		if (!(ds->user_port_mask & (1 << port)))
>  			continue;
>  
>  		if (!ds->ports[port])
> 


-- 
Florian