diff for duplicates of <570D0103.3080807@mentor.com> diff --git a/a/1.txt b/N1/1.txt index e5b2188..7a760a8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -7,7 +7,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > > [1] http://www.embest-tech.com/shop/star/marsboard.html > -> Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> +> Signed-off-by: Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org> > --- > > Changes v1 -> v2: @@ -38,7 +38,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > +++ b/arch/arm/boot/dts/imx6q-marsboard.dts > @@ -0,0 +1,411 @@ > +/* -> + * Copyright (C) 2016 Sergio Prado (sergio.prado at e-labworks.com) +> + * Copyright (C) 2016 Sergio Prado (sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org) > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -95,7 +95,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + reg_3p3v: regulator at 1 { +> + reg_3p3v: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "3P3V"; @@ -103,7 +103,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + regulator-max-microvolt = <3300000>; > + }; > + -> + reg_usb_otg_vbus: regulator at 2 { +> + reg_usb_otg_vbus: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "usb_otg_vbus"; @@ -118,7 +118,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led>; > + -> + led at 1 { +> + led@1 { the outcome of one recent discussion is that a unit-address component of the name is used only if there is a reg property, which is not the case @@ -130,7 +130,7 @@ here. > + linux,default-trigger = "heartbeat"; > + }; > + -> + led at 2 { +> + led@2 { Same as above. @@ -224,7 +224,7 @@ Same as above. > + fsl,spi-num-chipselects = <1>; > + status = "okay"; > + -> + m25p80 at 0 { +> + m25p80@0 { > + compatible = "microchip,sst25vf016b"; > + spi-max-frequency = <20000000>; > + reg = <0>; @@ -464,3 +464,7 @@ Copy pasted board name? -- With best wishes, Vladimir +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 64e2c45..801fcfb 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,20 @@ "ref\01460420743-30883-1-git-send-email-sergio.prado@e-labworks.com\0" - "From\0vladimir_zapolskiy@mentor.com (Vladimir Zapolskiy)\0" - "Subject\0[PATCH v2] ARM: dts: imx6: Add dts for Embest MarS Board\0" + "ref\01460420743-30883-1-git-send-email-sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org\0" + "From\0Vladimir Zapolskiy <vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: [PATCH v2] ARM: dts: imx6: Add dts for Embest MarS Board\0" "Date\0Tue, 12 Apr 2016 17:06:59 +0300\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org>" + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org + shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" "\00:1\0" "b\0" "Hi Sergio,\n" @@ -14,7 +26,7 @@ "> \n" "> [1] http://www.embest-tech.com/shop/star/marsboard.html\n" "> \n" - "> Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>\n" + "> Signed-off-by: Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org>\n" "> ---\n" "> \n" "> Changes v1 -> v2:\n" @@ -45,7 +57,7 @@ "> +++ b/arch/arm/boot/dts/imx6q-marsboard.dts\n" "> @@ -0,0 +1,411 @@\n" "> +/*\n" - "> + * Copyright (C) 2016 Sergio Prado (sergio.prado at e-labworks.com)\n" + "> + * Copyright (C) 2016 Sergio Prado (sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org)\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -102,7 +114,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\treg_3p3v: regulator at 1 {\n" + "> +\t\treg_3p3v: regulator@1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"3P3V\";\n" @@ -110,7 +122,7 @@ "> +\t\t\tregulator-max-microvolt = <3300000>;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_usb_otg_vbus: regulator at 2 {\n" + "> +\t\treg_usb_otg_vbus: regulator@2 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tregulator-name = \"usb_otg_vbus\";\n" @@ -125,7 +137,7 @@ "> +\t\tpinctrl-names = \"default\";\n" "> +\t\tpinctrl-0 = <&pinctrl_led>;\n" "> +\n" - "> +\t\tled at 1 {\n" + "> +\t\tled@1 {\n" "\n" "the outcome of one recent discussion is that a unit-address component of\n" "the name is used only if there is a reg property, which is not the case\n" @@ -137,7 +149,7 @@ "> +\t\t\tlinux,default-trigger = \"heartbeat\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tled at 2 {\n" + "> +\t\tled@2 {\n" "\n" "Same as above.\n" "\n" @@ -231,7 +243,7 @@ "> +\tfsl,spi-num-chipselects = <1>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tm25p80 at 0 {\n" + "> +\tm25p80@0 {\n" "> +\t\tcompatible = \"microchip,sst25vf016b\";\n" "> +\t\tspi-max-frequency = <20000000>;\n" "> +\t\treg = <0>;\n" @@ -470,6 +482,10 @@ "\n" "--\n" "With best wishes,\n" - Vladimir + "Vladimir\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -87d0dfecb42feb4df0df77c94024552c97c33ee679f05e9319688e5282bd2f76 +9e581acfc63192935683b793421666f195b428faa6d1b94e6e9a763969f5b761
diff --git a/a/1.txt b/N2/1.txt index e5b2188..e917292 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -38,7 +38,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > +++ b/arch/arm/boot/dts/imx6q-marsboard.dts > @@ -0,0 +1,411 @@ > +/* -> + * Copyright (C) 2016 Sergio Prado (sergio.prado at e-labworks.com) +> + * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com) > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -95,7 +95,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + reg_3p3v: regulator at 1 { +> + reg_3p3v: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "3P3V"; @@ -103,7 +103,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + regulator-max-microvolt = <3300000>; > + }; > + -> + reg_usb_otg_vbus: regulator at 2 { +> + reg_usb_otg_vbus: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "usb_otg_vbus"; @@ -118,7 +118,7 @@ On 12.04.2016 03:25, Sergio Prado wrote: > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led>; > + -> + led at 1 { +> + led@1 { the outcome of one recent discussion is that a unit-address component of the name is used only if there is a reg property, which is not the case @@ -130,7 +130,7 @@ here. > + linux,default-trigger = "heartbeat"; > + }; > + -> + led at 2 { +> + led@2 { Same as above. @@ -224,7 +224,7 @@ Same as above. > + fsl,spi-num-chipselects = <1>; > + status = "okay"; > + -> + m25p80 at 0 { +> + m25p80@0 { > + compatible = "microchip,sst25vf016b"; > + spi-max-frequency = <20000000>; > + reg = <0>; diff --git a/a/content_digest b/N2/content_digest index 64e2c45..1ca5c0c 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,8 +1,19 @@ "ref\01460420743-30883-1-git-send-email-sergio.prado@e-labworks.com\0" - "From\0vladimir_zapolskiy@mentor.com (Vladimir Zapolskiy)\0" - "Subject\0[PATCH v2] ARM: dts: imx6: Add dts for Embest MarS Board\0" + "From\0Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>\0" + "Subject\0Re: [PATCH v2] ARM: dts: imx6: Add dts for Embest MarS Board\0" "Date\0Tue, 12 Apr 2016 17:06:59 +0300\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Sergio Prado <sergio.prado@e-labworks.com>" + <robh+dt@kernel.org> + <pawel.moll@arm.com> + <mark.rutland@arm.com> + <ijc+devicetree@hellion.org.uk> + <galak@codeaurora.org> + <linux@arm.linux.org.uk> + <shawnguo@kernel.org> + <kernel@pengutronix.de> + <devicetree@vger.kernel.org> + <linux-arm-kernel@lists.infradead.org> + " <linux-kernel@vger.kernel.org>\0" "\00:1\0" "b\0" "Hi Sergio,\n" @@ -45,7 +56,7 @@ "> +++ b/arch/arm/boot/dts/imx6q-marsboard.dts\n" "> @@ -0,0 +1,411 @@\n" "> +/*\n" - "> + * Copyright (C) 2016 Sergio Prado (sergio.prado at e-labworks.com)\n" + "> + * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -102,7 +113,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\treg_3p3v: regulator at 1 {\n" + "> +\t\treg_3p3v: regulator@1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"3P3V\";\n" @@ -110,7 +121,7 @@ "> +\t\t\tregulator-max-microvolt = <3300000>;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_usb_otg_vbus: regulator at 2 {\n" + "> +\t\treg_usb_otg_vbus: regulator@2 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tregulator-name = \"usb_otg_vbus\";\n" @@ -125,7 +136,7 @@ "> +\t\tpinctrl-names = \"default\";\n" "> +\t\tpinctrl-0 = <&pinctrl_led>;\n" "> +\n" - "> +\t\tled at 1 {\n" + "> +\t\tled@1 {\n" "\n" "the outcome of one recent discussion is that a unit-address component of\n" "the name is used only if there is a reg property, which is not the case\n" @@ -137,7 +148,7 @@ "> +\t\t\tlinux,default-trigger = \"heartbeat\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tled at 2 {\n" + "> +\t\tled@2 {\n" "\n" "Same as above.\n" "\n" @@ -231,7 +242,7 @@ "> +\tfsl,spi-num-chipselects = <1>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tm25p80 at 0 {\n" + "> +\tm25p80@0 {\n" "> +\t\tcompatible = \"microchip,sst25vf016b\";\n" "> +\t\tspi-max-frequency = <20000000>;\n" "> +\t\treg = <0>;\n" @@ -472,4 +483,4 @@ "With best wishes,\n" Vladimir -87d0dfecb42feb4df0df77c94024552c97c33ee679f05e9319688e5282bd2f76 +2be04247d6ef6d1e23004f9f98a12168affb7ad8254a00775e0fd8a4ff3765f0
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.