[PATCH] arm64: mm: Enhance Virtual kernel memory layout

[james.morse@arm.com (James Morse)]

Hi,

On 13/04/16 08:49, Kefeng Wang wrote:
> 1) Show kernel excetion vector region and bss segment information.

Nit: exception


> 2) Only show modules and PCI I/O with corresponding config enabled.
> 3) Each line with single pr_cont, or lead to anomalous print in dmesg.

This commit message is a little confusing, it doesn't mention that this is to do
with the dump of the kernel memory layout during boot. I presume the motivation
is the missing time stamps when built with CONFIG_PRINTK_TIME.

Why add an entry for the vectors? They live in the text section, so this memory
is already covered. Adding it like this means the list is out of order.

It is probably better to put the splitting of pr_cont() into one per line in a
separate patch to adding new rows.


> ---
> With this patch,
> 
> [    0.000000] Virtual kernel memory layout:
> [    0.000000]      vector : 0xffffff8008084800 - 0xffffff8008084f80   (     1 KB)
> [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
> [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
> [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008753000   (  6988 KB)
> [    0.000000]     .rodata : 0xffffff8008753000 - 0xffffff8008a3a000   (  2972 KB)
> [    0.000000]       .init : 0xffffff8008a3a000 - 0xffffff8008b06000   (   816 KB)
> [    0.000000]       .data : 0xffffff8008b06000 - 0xffffff8008ba2400   (   625 KB)
> [    0.000000]        .bss : 0xffffff8008ba2400 - 0xffffff8008bdf738   (   245 KB)
> [    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
> [    0.000000]               0xffffffbdc0000000 - 0xffffffbdc8000000   (   128 MB actual)
> [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
> [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
> [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc200000000   (  8192 MB)
> 
> Before,
> 
> [    0.000000] Virtual kernel memory layout:
> [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
> [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
> [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008753000   (  6988 KB)
>     .rodata : 0xffffff8008753000 - 0xffffff8008a3a000   (  2972 KB)
>       .init : 0xffffff8008a3a000 - 0xffffff8008b06000   (   816 KB)
>       .data : 0xffffff8008b06000 - 0xffffff8008ba2400   (   625 KB)
> [    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
>               0xffffffbdc0000000 - 0xffffffbdc8000000   (   128 MB actual)
> [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
> [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
> [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc200000000   (  8192 MB)
> 
>  arch/arm64/mm/init.c | 32 +++++++++++++++++++++-----------
>  1 file changed, 21 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index ea989d8..c6bcaa7 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -345,6 +345,9 @@ static void __init free_unused_memmap(void)
>   */
>  void __init mem_init(void)
>  {
> +	/* kernel exception vectors, 16 entries and each one with 128bytes */
> +	extern char vectors[];
> +
>  	swiotlb_init(1);
>  
>  	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
> @@ -363,34 +366,41 @@ void __init mem_init(void)
>  #define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
>  
>  	pr_notice("Virtual kernel memory layout:\n");
> +	pr_cont("     vector : 0x%p - 0x%p   (%6ld KB)\n",
> +		MLK(vectors, vectors + 0x780));

0x780? Shouldn't this be 0x800, or better SZ_2K?


>  #ifdef CONFIG_KASAN
>  	pr_cont("    kasan   : 0x%16lx - 0x%16lx   (%6ld GB)\n",
>  		MLG(KASAN_SHADOW_START, KASAN_SHADOW_END));
>  #endif
> +#ifdef CONFIG_MODULES
>  	pr_cont("    modules : 0x%16lx - 0x%16lx   (%6ld MB)\n",
>  		MLM(MODULES_VADDR, MODULES_END));
> +#endif
>  	pr_cont("    vmalloc : 0x%16lx - 0x%16lx   (%6ld GB)\n",
>  		MLG(VMALLOC_START, VMALLOC_END));
> -	pr_cont("      .text : 0x%p" " - 0x%p" "   (%6ld KB)\n"
> -		"    .rodata : 0x%p" " - 0x%p" "   (%6ld KB)\n"
> -		"      .init : 0x%p" " - 0x%p" "   (%6ld KB)\n"
> -		"      .data : 0x%p" " - 0x%p" "   (%6ld KB)\n",
> -		MLK_ROUNDUP(_text, __start_rodata),
> -		MLK_ROUNDUP(__start_rodata, _etext),
> -		MLK_ROUNDUP(__init_begin, __init_end),
> +	pr_cont("      .text : 0x%p" " - 0x%p" "   (%6ld KB)\n",
> +		MLK_ROUNDUP(_text, __start_rodata));
> +	pr_cont("    .rodata : 0x%p" " - 0x%p" "   (%6ld KB)\n",
> +		MLK_ROUNDUP(__start_rodata, _etext));
> +	pr_cont("      .init : 0x%p" " - 0x%p" "   (%6ld KB)\n",
> +		MLK_ROUNDUP(__init_begin, __init_end));
> +	pr_cont("      .data : 0x%p" " - 0x%p" "   (%6ld KB)\n",
>  		MLK_ROUNDUP(_sdata, _edata));
> +	pr_cont("       .bss : 0x%p" " - 0x%p" "   (%6ld KB)\n",
> +		MLK_ROUNDUP(__bss_start, __bss_stop));
>  #ifdef CONFIG_SPARSEMEM_VMEMMAP
> -	pr_cont("    vmemmap : 0x%16lx - 0x%16lx   (%6ld GB maximum)\n"
> -		"              0x%16lx - 0x%16lx   (%6ld MB actual)\n",
> -		MLG(VMEMMAP_START,
> -		    VMEMMAP_START + VMEMMAP_SIZE),
> +	pr_cont("    vmemmap : 0x%16lx - 0x%16lx   (%6ld GB maximum)\n",
> +		MLG(VMEMMAP_START, VMEMMAP_START + VMEMMAP_SIZE));
> +	pr_cont("              0x%16lx - 0x%16lx   (%6ld MB actual)\n",
>  		MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()),
>  		    (unsigned long)virt_to_page(high_memory)));
>  #endif
>  	pr_cont("    fixed   : 0x%16lx - 0x%16lx   (%6ld KB)\n",
>  		MLK(FIXADDR_START, FIXADDR_TOP));
> +#ifdef CONFIG_PCI
>  	pr_cont("    PCI I/O : 0x%16lx - 0x%16lx   (%6ld MB)\n",
>  		MLM(PCI_IO_START, PCI_IO_END));
> +#endif
>  	pr_cont("    memory  : 0x%16lx - 0x%16lx   (%6ld MB)\n",
>  		MLM(__phys_to_virt(memblock_start_of_DRAM()),
>  		    (unsigned long)high_memory));
> 


Thanks,

James