From: Pan Xinhui <xinhui@linux.vnet.ibm.com>
To: Waiman Long <Waiman.Long@hpe.com>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Scott J Norton <scott.norton@hpe.com>,
Douglas Hatch <doug.hatch@hpe.com>
Subject: Re: [PATCH] locking/pvqspinlock: Add lock holder CPU argument to pv_wait()
Date: Thu, 14 Apr 2016 22:34:26 +0800 [thread overview]
Message-ID: <570FAA72.5090302@linux.vnet.ibm.com> (raw)
In-Reply-To: <570F6487.8070706@linux.vnet.ibm.com>
hello, Waiman
I try your patch, thanks!
also I do some improvement.
below code diff has been tested, it works for me. :)
diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
index ce2f75e..99f31e4 100644
--- a/kernel/locking/qspinlock.c
+++ b/kernel/locking/qspinlock.c
@@ -248,7 +248,8 @@ static __always_inline void set_locked(struct qspinlock *lock)
*/
static __always_inline void __pv_init_node(struct mcs_spinlock *node) { }
-static __always_inline void __pv_wait_node(struct mcs_spinlock *node,
+static __always_inline void __pv_wait_node(struct qspinlock *lock,
+ struct mcs_spinlock *node,
struct mcs_spinlock *prev) { }
static __always_inline void __pv_kick_node(struct qspinlock *lock,
struct mcs_spinlock *node) { }
@@ -407,7 +408,7 @@ queue:
prev = decode_tail(old);
WRITE_ONCE(prev->next, node);
- pv_wait_node(node, prev);
+ pv_wait_node(lock, node, prev);
arch_mcs_spin_lock_contended(&node->locked);
/*
diff --git a/kernel/locking/qspinlock_paravirt.h b/kernel/locking/qspinlock_paravirt.h
index 01a6d16..75ccfd3 100644
--- a/kernel/locking/qspinlock_paravirt.h
+++ b/kernel/locking/qspinlock_paravirt.h
@@ -255,6 +257,19 @@ static struct pv_node *pv_unhash(struct qspinlock *lock)
BUG();
}
+static struct pv_node *pv_hash_lookup(struct qspinlock *lock)
+{
+ unsigned long offset, hash = hash_ptr(lock, pv_lock_hash_bits);
+ struct pv_hash_entry *he;
+
+ for_each_hash_entry(he, offset, hash) {
+ if (READ_ONCE(he->lock) == lock) {
+ return he->node;
+ }
+ }
+ return NULL;
+}
+
/*
* Return true if when it is time to check the previous node which is not
* in a running state.
@@ -287,14 +303,17 @@ static void pv_init_node(struct mcs_spinlock *node)
* pv_kick_node() is used to set _Q_SLOW_VAL and fill in hash table on its
* behalf.
*/
-static void pv_wait_node(struct mcs_spinlock *node, struct mcs_spinlock *prev)
+static void pv_wait_node(struct qspinlock *lock, struct mcs_spinlock *node,
+ struct mcs_spinlock *prev)
{
struct pv_node *pn = (struct pv_node *)node;
struct pv_node *pp = (struct pv_node *)prev;
+ struct pv_node *ph;
int waitcnt = 0;
int loop;
bool wait_early;
+ pn->prev_cpu = pp->cpu;
/* waitcnt processing will be compiled out if !QUEUED_LOCK_STAT */
for (;; waitcnt++) {
for (wait_early = false, loop = SPIN_THRESHOLD; loop; loop--) {
@@ -322,7 +341,10 @@ static void pv_wait_node(struct mcs_spinlock *node, struct mcs_spinlock *prev)
qstat_inc(qstat_pv_wait_node, true);
qstat_inc(qstat_pv_wait_again, waitcnt);
qstat_inc(qstat_pv_wait_early, wait_early);
- pv_wait(&pn->state, vcpu_halted);
+ ph = pv_hash_lookup(lock);
+ if (!ph)
+ ph = pp;
+ pv_wait(&pn->state, vcpu_halted, ph->prev_cpu);
}
/*
any comments are welcome. I put my patch here just for simplicity, or need I send it out in a new thread?
thanks
xinhui
On 2016年04月14日 17:36, Pan Xinhui wrote:
>
>
> On 2016年04月14日 04:59, Waiman Long wrote:
>> Pan Xinhui was asking for a lock holder cpu argument in pv_wait()
>> to help the porting of pvqspinlock to PPC. The new argument will can
>> potentially help hypervisor expediate the execution of the critical
>> section so that the lock holder vCPU can release the lock sooner.
>>
>> This patch does just that by storing the previous node vCPU number.
>> In pv_wait_head_or_lock(), pv_wait() will be called with that vCPU
>> number as it is likely to be the lock holder. In pv_wait_node(),
>> -1 will be passed to pv_wait() instead to indicate that it doesn't
>> know what the current lock holder is.
>>
>> This patch introduces negligible overhead to the current pvqspinlock
>> code. The extra lockcpu argument isn't currently used in x86
>> architecture.
>>
>> Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
>> ---
>> arch/x86/include/asm/paravirt.h | 4 ++--
>> arch/x86/include/asm/paravirt_types.h | 2 +-
>> arch/x86/kernel/kvm.c | 2 +-
>> arch/x86/xen/spinlock.c | 2 +-
>> kernel/locking/qspinlock_paravirt.h | 19 +++++++++++++++----
>> kernel/locking/qspinlock_stat.h | 8 ++++----
>> 6 files changed, 24 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
>> index 601f1b8..b89eccf 100644
>> --- a/arch/x86/include/asm/paravirt.h
>> +++ b/arch/x86/include/asm/paravirt.h
>> @@ -676,9 +676,9 @@ static __always_inline void pv_queued_spin_unlock(struct qspinlock *lock)
>> PVOP_VCALLEE1(pv_lock_ops.queued_spin_unlock, lock);
>> }
>>
>> -static __always_inline void pv_wait(u8 *ptr, u8 val)
>> +static __always_inline void pv_wait(u8 *ptr, u8 val, int lockcpu)
>> {
>> - PVOP_VCALL2(pv_lock_ops.wait, ptr, val);
>> + PVOP_VCALL3(pv_lock_ops.wait, ptr, val, lockcpu);
>> }
>>
>> static __always_inline void pv_kick(int cpu)
>> diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
>> index e8c2326..2fc26c1 100644
>> --- a/arch/x86/include/asm/paravirt_types.h
>> +++ b/arch/x86/include/asm/paravirt_types.h
>> @@ -312,7 +312,7 @@ struct pv_lock_ops {
>> void (*queued_spin_lock_slowpath)(struct qspinlock *lock, u32 val);
>> struct paravirt_callee_save queued_spin_unlock;
>>
>> - void (*wait)(u8 *ptr, u8 val);
>> + void (*wait)(u8 *ptr, u8 val, int lockcpu);
>> void (*kick)(int cpu);
>> #else /* !CONFIG_QUEUED_SPINLOCKS */
>> struct paravirt_callee_save lock_spinning;
>> diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
>> index dc1207e..47ab4e1 100644
>> --- a/arch/x86/kernel/kvm.c
>> +++ b/arch/x86/kernel/kvm.c
>> @@ -590,7 +590,7 @@ static void kvm_kick_cpu(int cpu)
>>
>> #include <asm/qspinlock.h>
>>
>> -static void kvm_wait(u8 *ptr, u8 val)
>> +static void kvm_wait(u8 *ptr, u8 val, int lockcpu)
>> {
>> unsigned long flags;
>>
>> diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
>> index 9e2ba5c..6f78c41 100644
>> --- a/arch/x86/xen/spinlock.c
>> +++ b/arch/x86/xen/spinlock.c
>> @@ -33,7 +33,7 @@ static void xen_qlock_kick(int cpu)
>> /*
>> * Halt the current CPU & release it back to the host
>> */
>> -static void xen_qlock_wait(u8 *byte, u8 val)
>> +static void xen_qlock_wait(u8 *byte, u8 val, int lockcpu)
>> {
>> int irq = __this_cpu_read(lock_kicker_irq);
>>
>> diff --git a/kernel/locking/qspinlock_paravirt.h b/kernel/locking/qspinlock_paravirt.h
>> index 21ede57..4bec98b 100644
>> --- a/kernel/locking/qspinlock_paravirt.h
>> +++ b/kernel/locking/qspinlock_paravirt.h
>> @@ -51,6 +51,7 @@ struct pv_node {
>> struct mcs_spinlock __res[3];
>>
>> int cpu;
>> + int prev_cpu; /* Previous node cpu */
>> u8 state;
>> };
>>
>> @@ -156,8 +157,7 @@ static __always_inline int trylock_clear_pending(struct qspinlock *lock)
>> * 256 (64-bit) or 512 (32-bit) to fully utilize a 4k page.
>> *
>> * Since we should not be holding locks from NMI context (very rare indeed) the
>> - * max load factor is 0.75, which is around the point where open addressing
>> - * breaks down.
>> + * max load factor is 0.75.
>> *
>> */
>> struct pv_hash_entry {
>> @@ -275,6 +275,7 @@ static void pv_init_node(struct mcs_spinlock *node)
>>
>> pn->cpu = smp_processor_id();
>> pn->state = vcpu_running;
>> + pn->prev_cpu = -1;
>> }
>>
>> /*
>> @@ -290,6 +291,8 @@ static void pv_wait_node(struct mcs_spinlock *node, struct mcs_spinlock *prev)
>> int loop;
>> bool wait_early;
>>
>> + pn->prev_cpu = pp->cpu; /* Save previous node vCPU */
>> +
>> /* waitcnt processing will be compiled out if !QUEUED_LOCK_STAT */
>> for (;; waitcnt++) {
>> for (wait_early = false, loop = SPIN_THRESHOLD; loop; loop--) {
>> @@ -317,7 +320,7 @@ static void pv_wait_node(struct mcs_spinlock *node, struct mcs_spinlock *prev)
>> qstat_inc(qstat_pv_wait_node, true);
>> qstat_inc(qstat_pv_wait_again, waitcnt);
>> qstat_inc(qstat_pv_wait_early, wait_early);
>> - pv_wait(&pn->state, vcpu_halted);
>> + pv_wait(&pn->state, vcpu_halted, -1);
> If the contention is high, we might run here. And we indeed need the lock holder on such scenario.
> how about that, we store the lock into pv_node, then search the lock in hashtable,
> code might look like,
> node = pv_hash_lookup(pn->lock);
> pv_wait(...,node->holder);
> thanks
> xinhui
>> }
>>
>> /*
>> @@ -453,7 +456,15 @@ pv_wait_head_or_lock(struct qspinlock *lock, struct mcs_spinlock *node)
>> WRITE_ONCE(pn->state, vcpu_halted);
>> qstat_inc(qstat_pv_wait_head, true);
>> qstat_inc(qstat_pv_wait_again, waitcnt);
>> - pv_wait(&l->locked, _Q_SLOW_VAL);
>> +
>> + /*
>> + * Pass in the previous node vCPU nmber which is likely to be
>> + * the lock holder vCPU. This additional information may help
>> + * the hypervisor to give more resource to that vCPU so that
>> + * it can release the lock faster. With lock stealing,
>> + * however, that vCPU may not be the actual lock holder.
>> + */
>> + pv_wait(&l->locked, _Q_SLOW_VAL, pn->prev_cpu);
>>
>> /*
>> * The unlocker should have freed the lock before kicking the
>> diff --git a/kernel/locking/qspinlock_stat.h b/kernel/locking/qspinlock_stat.h
>> index eb2a2c9..8728348 100644
>> --- a/kernel/locking/qspinlock_stat.h
>> +++ b/kernel/locking/qspinlock_stat.h
>> @@ -266,12 +266,12 @@ static inline void __pv_kick(int cpu)
>> /*
>> * Replacement function for pv_wait()
>> */
>> -static inline void __pv_wait(u8 *ptr, u8 val)
>> +static inline void __pv_wait(u8 *ptr, u8 val, int lockcpu)
>> {
>> u64 *pkick_time = this_cpu_ptr(&pv_kick_time);
>>
>> *pkick_time = 0;
>> - pv_wait(ptr, val);
>> + pv_wait(ptr, val, lockcpu);
>> if (*pkick_time) {
>> this_cpu_add(qstats[qstat_pv_latency_wake],
>> sched_clock() - *pkick_time);
>> @@ -279,8 +279,8 @@ static inline void __pv_wait(u8 *ptr, u8 val)
>> }
>> }
>>
>> -#define pv_kick(c) __pv_kick(c)
>> -#define pv_wait(p, v) __pv_wait(p, v)
>> +#define pv_kick(c) __pv_kick(c)
>> +#define pv_wait(p, v, c) __pv_wait(p, v, c)
>>
>> #else /* CONFIG_QUEUED_LOCK_STAT */
>>
>
next prev parent reply other threads:[~2016-04-14 14:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-13 20:59 [PATCH] locking/pvqspinlock: Add lock holder CPU argument to pv_wait() Waiman Long
2016-04-14 0:21 ` Peter Zijlstra
2016-04-14 1:59 ` Waiman Long
2016-04-14 8:39 ` Pan Xinhui
2016-04-14 9:36 ` Pan Xinhui
2016-04-14 14:34 ` Pan Xinhui [this message]
2016-04-14 18:47 ` Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570FAA72.5090302@linux.vnet.ibm.com \
--to=xinhui@linux.vnet.ibm.com \
--cc=Waiman.Long@hpe.com \
--cc=doug.hatch@hpe.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=scott.norton@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.