From: Martin Peres <martin.peres-GANU6spQydw@public.gmane.org>
To: Karol Herbst <nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>,
nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH v4 15/37] clk: allow boosting only when NvBoost is set
Date: Wed, 20 Apr 2016 00:06:28 +0300 [thread overview]
Message-ID: <57169DD4.3030106@free.fr> (raw)
In-Reply-To: <1461006851-5007-16-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
On 18/04/16 22:13, Karol Herbst wrote:
> 0: base clock from the vbios is max clock
> 1: boost only to boost clock from the vbios (default)
As commented upon on IRC, I would prefer us to play it super safe and
stick to the base
clock until we have power monitoring working, at which point we may make
1 the default.
Please change it to keep my R-b :)
> 2: boost to max clock available
>
> v2: moved into nvkm_cstate_valid
> v4: check the existence of the clocks before limiting
>
> Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
> Reviewed-by: Martin Peres <martin.peres@free.fr>
> ---
> drm/nouveau/include/nvkm/subdev/clk.h | 9 ++++++++-
> drm/nouveau/nvkm/subdev/clk/base.c | 33 ++++++++++++++++++++++++++++++++-
> drm/nouveau/nvkm/subdev/clk/gf100.c | 2 +-
> drm/nouveau/nvkm/subdev/clk/gk104.c | 2 +-
> 4 files changed, 42 insertions(+), 4 deletions(-)
>
> diff --git a/drm/nouveau/include/nvkm/subdev/clk.h b/drm/nouveau/include/nvkm/subdev/clk.h
> index 6226f0d..99ee05c 100644
> --- a/drm/nouveau/include/nvkm/subdev/clk.h
> +++ b/drm/nouveau/include/nvkm/subdev/clk.h
> @@ -68,7 +68,8 @@ struct nvkm_pstate {
> struct nvkm_domain {
> enum nv_clk_src name;
> u8 bios; /* 0xff for none */
> -#define NVKM_CLK_DOM_FLAG_CORE 0x01
> +#define NVKM_CLK_DOM_FLAG_CORE 0x01
> +#define NVKM_CLK_DOM_FLAG_BASECLK 0x02
> u8 flags;
> const char *mname;
> int mdiv;
> @@ -98,6 +99,12 @@ struct nvkm_clk {
> int dstate; /* display adjustment (min+) */
>
> bool allow_reclock;
> +#define NVKM_CLK_BOOST_NONE 0x0
> +#define NVKM_CLK_BOOST_AVG 0x1
> +#define NVKM_CLK_BOOST_FULL 0x2
> + u8 boost_mode;
> + u32 base_khz;
> + u32 boost_khz;
>
> /*XXX: die, these are here *only* to support the completely
> * bat-shit insane what-was-nouveau_hw.c code
> diff --git a/drm/nouveau/nvkm/subdev/clk/base.c b/drm/nouveau/nvkm/subdev/clk/base.c
> index 21f6369..a9a3666 100644
> --- a/drm/nouveau/nvkm/subdev/clk/base.c
> +++ b/drm/nouveau/nvkm/subdev/clk/base.c
> @@ -24,6 +24,7 @@
> #include "priv.h"
>
> #include <subdev/bios.h>
> +#include <subdev/bios/baseclock.h>
> #include <subdev/bios/boost.h>
> #include <subdev/bios/cstep.h>
> #include <subdev/bios/perf.h>
> @@ -77,9 +78,25 @@ nvkm_clk_adjust(struct nvkm_clk *clk, bool adjust,
> static bool
> nvkm_cstate_valid(struct nvkm_clk *clk, struct nvkm_cstate *cstate, u32 max_volt, int temp)
> {
> + const struct nvkm_domain *domain = clk->domains;
> struct nvkm_volt *volt = clk->subdev.device->volt;
> int voltage;
>
> + while (domain && domain->name != nv_clk_src_max) {
> + if (domain->flags & NVKM_CLK_DOM_FLAG_BASECLK) {
> + u32 freq = cstate->domain[domain->name];
> + switch (clk->boost_mode) {
> + case NVKM_CLK_BOOST_NONE:
> + if (clk->base_khz && freq > clk->base_khz)
> + return false;
> + case NVKM_CLK_BOOST_AVG:
> + if (clk->boost_khz && freq > clk->boost_khz)
> + return false;
> + }
> + }
> + domain++;
> + }
> +
> if (!volt)
> return true;
>
> @@ -641,10 +658,24 @@ int
> nvkm_clk_ctor(const struct nvkm_clk_func *func, struct nvkm_device *device,
> int index, bool allow_reclock, struct nvkm_clk *clk)
> {
> + struct nvkm_subdev *subdev = &clk->subdev;
> + struct nvkm_bios *bios = device->bios;
> int ret, idx, arglen;
> const char *mode;
> + struct nvbios_baseclk_header h;
> +
> + nvkm_subdev_ctor(&nvkm_clk, device, index, subdev);
> +
> + clk->boost_mode = nvkm_longopt(device->cfgopt, "NvBoost",
> + NVKM_CLK_BOOST_AVG);
> + if (bios && !nvbios_baseclock_parse(bios, &h)) {
> + struct nvbios_baseclk_entry base, boost;
> + if (!nvbios_baseclock_entry(bios, &h, h.boost_id, &boost))
> + clk->boost_khz = boost.clock_mhz * 1000;
> + if (!nvbios_baseclock_entry(bios, &h, h.base_id, &base))
> + clk->base_khz = base.clock_mhz * 1000;
> + }
>
> - nvkm_subdev_ctor(&nvkm_clk, device, index, &clk->subdev);
> clk->func = func;
> INIT_LIST_HEAD(&clk->states);
> clk->domains = func->domains;
> diff --git a/drm/nouveau/nvkm/subdev/clk/gf100.c b/drm/nouveau/nvkm/subdev/clk/gf100.c
> index 78c449b..71b7c9f 100644
> --- a/drm/nouveau/nvkm/subdev/clk/gf100.c
> +++ b/drm/nouveau/nvkm/subdev/clk/gf100.c
> @@ -443,7 +443,7 @@ gf100_clk = {
> { nv_clk_src_hubk06 , 0x00 },
> { nv_clk_src_hubk01 , 0x01 },
> { nv_clk_src_copy , 0x02 },
> - { nv_clk_src_gpc , 0x03, 0, "core", 2000 },
> + { nv_clk_src_gpc , 0x03, NVKM_CLK_DOM_FLAG_BASECLK, "core", 2000 },
> { nv_clk_src_rop , 0x04 },
> { nv_clk_src_mem , 0x05, 0, "memory", 1000 },
> { nv_clk_src_vdec , 0x06 },
> diff --git a/drm/nouveau/nvkm/subdev/clk/gk104.c b/drm/nouveau/nvkm/subdev/clk/gk104.c
> index 975c401..639234f 100644
> --- a/drm/nouveau/nvkm/subdev/clk/gk104.c
> +++ b/drm/nouveau/nvkm/subdev/clk/gk104.c
> @@ -485,7 +485,7 @@ gk104_clk = {
> .domains = {
> { nv_clk_src_crystal, 0xff },
> { nv_clk_src_href , 0xff },
> - { nv_clk_src_gpc , 0x00, NVKM_CLK_DOM_FLAG_CORE, "core", 2000 },
> + { nv_clk_src_gpc , 0x00, NVKM_CLK_DOM_FLAG_CORE | NVKM_CLK_DOM_FLAG_BASECLK, "core", 2000 },
> { nv_clk_src_hubk07 , 0x01, NVKM_CLK_DOM_FLAG_CORE },
> { nv_clk_src_rop , 0x02, NVKM_CLK_DOM_FLAG_CORE },
> { nv_clk_src_mem , 0x03, 0, "memory", 500 },
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2016-04-19 21:06 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-18 19:13 [PATCH v4 00/37] Volting/Clocking improvements for Fermi and newer Karol Herbst
[not found] ` <1461006851-5007-1-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-18 19:13 ` [PATCH v4 01/37] bios/volt: handle voltage table version 0x50 with 0ed header Karol Herbst
2016-04-18 19:13 ` [PATCH v4 02/37] volt: properly detect entry based voltage tables Karol Herbst
2016-04-18 19:13 ` [PATCH v4 03/37] volt: save the voltage range we are able to set Karol Herbst
2016-04-18 19:13 ` [PATCH v4 04/37] volt: add nvkm_volt_map_min function Karol Herbst
2016-04-18 19:13 ` [PATCH v4 05/37] clk: don't create cstates whit voltages higher than what the gpu can do Karol Herbst
2016-04-18 19:13 ` [PATCH v4 06/37] volt: parse the max voltage map entries Karol Herbst
[not found] ` <1461006851-5007-7-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 19:46 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 07/37] volt: add min_id parameter to nvkm_volt_set_id Karol Herbst
2016-04-18 19:13 ` [PATCH v4 08/37] clk: export nvkm_volt_map Karol Herbst
[not found] ` <1461006851-5007-9-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 19:54 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 09/37] clk: add index field to nvkm_cstate Karol Herbst
2016-04-18 19:13 ` [PATCH v4 10/37] add daemon to compare nouveau with blob voltage Karol Herbst
[not found] ` <1461006851-5007-11-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 20:26 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 11/37] volt: add temperature parameter to nvkm_volt_map Karol Herbst
[not found] ` <1461006851-5007-12-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 20:06 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 12/37] clk: fixup cstate selection Karol Herbst
2016-04-18 19:13 ` [PATCH v4 13/37] clk: respect voltage limits in nvkm_cstate_prog Karol Herbst
[not found] ` <1461006851-5007-14-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:04 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 14/37] bios: add parsing of BASE CLOCK table Karol Herbst
2016-04-18 19:13 ` [PATCH v4 15/37] clk: allow boosting only when NvBoost is set Karol Herbst
[not found] ` <1461006851-5007-16-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:06 ` Martin Peres [this message]
2016-04-18 19:13 ` [PATCH v4 16/37] volt: don't require perfect fit Karol Herbst
[not found] ` <1461006851-5007-17-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:10 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 17/37] bios/vmap: unk0 field is the mode Karol Herbst
[not found] ` <1461006851-5007-18-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:11 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 18/37] volt: add speedo Karol Herbst
[not found] ` <1461006851-5007-19-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:17 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 19/37] volt: add gf100 subdev with speedo Karol Herbst
[not found] ` <1461006851-5007-20-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:43 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 20/37] volt: add coefficients Karol Herbst
[not found] ` <1461006851-5007-21-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 21:52 ` Martin Peres
[not found] ` <5716A8B4.6020208-GANU6spQydw@public.gmane.org>
2016-04-19 21:54 ` Ilia Mirkin
[not found] ` <CAKb7UvhkH732AfCDRtkWG7GMzgXQYmf0XLzc0w7vfR7R9VuQ9A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-19 22:06 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 21/37] clk: save the max clock we can set Karol Herbst
[not found] ` <1461006851-5007-22-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-19 22:07 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 22/37] clk: rename nvkm_pstate_calc to nvkm_clk_update Karol Herbst
[not found] ` <1461006851-5007-23-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 20:12 ` Martin Peres
2016-04-18 19:13 ` [PATCH v4 23/37] nvif: add boost info and set operations Karol Herbst
2016-04-18 19:13 ` [PATCH v4 24/37] debugfs: add boost interface to change the boost_mode Karol Herbst
2016-04-18 19:13 ` [PATCH v4 25/37] clk: remove dstate and tstate Karol Herbst
[not found] ` <1461006851-5007-26-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 20:45 ` Martin Peres
[not found] ` <5717EA51.8040605-GANU6spQydw@public.gmane.org>
2016-04-20 20:45 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 26/37] therm: don't cancel the timer Karol Herbst
[not found] ` <1461006851-5007-27-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 20:47 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 27/37] clk: make pstate a pointer to nvkm_pstate Karol Herbst
[not found] ` <1461006851-5007-28-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 20:53 ` Martin Peres
[not found] ` <5717EC47.4040605-GANU6spQydw@public.gmane.org>
2016-04-20 21:46 ` karol herbst
[not found] ` <CAEXux-b+kaXYRt4BiOLbPWHY+jjpac2EXxuhetxR4-NER_DNsA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-04-20 22:56 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 28/37] clk: hold information about the current cstate status Karol Herbst
[not found] ` <1461006851-5007-29-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 21:38 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 29/37] clk: we should pass the pstate id around not the index in the list Karol Herbst
[not found] ` <1461006851-5007-30-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 21:59 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 30/37] clk: seperate the locking from the implementation in nvkm_clk_update Karol Herbst
[not found] ` <1461006851-5007-31-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:00 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 31/37] clk: split out update code to nv40 Karol Herbst
[not found] ` <1461006851-5007-32-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:08 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 32/37] clk: only do partial reclocks as required Karol Herbst
[not found] ` <1461006851-5007-33-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:17 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 33/37] therm: trigger reclock in temperature daemon Karol Herbst
[not found] ` <1461006851-5007-34-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:18 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 34/37] mc: fix NULL pointer access in libnouveau Karol Herbst
[not found] ` <1461006851-5007-35-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:21 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 35/37] clk: set clocks to pre suspend state after suspend Karol Herbst
[not found] ` <1461006851-5007-36-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:23 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 36/37] WIP volt/gk104: readout speedo Karol Herbst
[not found] ` <1461006851-5007-37-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:39 ` Martin Peres
2016-04-18 19:14 ` [PATCH v4 37/37] volt: add NvVoltOffsetmV option Karol Herbst
[not found] ` <1461006851-5007-38-git-send-email-nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org>
2016-04-20 22:55 ` Martin Peres
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57169DD4.3030106@free.fr \
--to=martin.peres-ganu6spqydw@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=nouveau-lIBOoy2+GI7scQ4cX5LuPg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.