Re: [PATCH v8 21/45] powerpc/powernv: Create PEs at PCI hot plugging time

[Alexey Kardashevskiy <aik@ozlabs.ru>]

On 04/20/2016 11:12 AM, Gavin Shan wrote:
> On Tue, Apr 19, 2016 at 02:16:42PM +1000, Alexey Kardashevskiy wrote:
>> On 02/17/2016 02:44 PM, Gavin Shan wrote:
>>> Currently, the PEs and their associated resources are assigned
>>> in ppc_md.pcibios_fixup() except those used by SRIOV VFs.
>>
>> But this new code does not affect IOV and VF's PEs will still be created
>> somewhere else rather than pnv_pci_setup_bridge()?
>>
>
> Correct. VF PEs cannot be created in pnv_pci_setup_bridge() as the PF's
> IOV capability isn't enabled at that point.
>
>>
>>> The
>>> function is called for once after PCI probing and resources
>>> assignment is completed. So it isn't hotplug friendly.
>>>
>>> This creates PEs dynamically by ppc_md.pcibios_setup_bridge(), which
>>> is called on the event during system bootup and PCI hotplug: updating
>>> PCI bridge's windows after resource assignment/reassignment are done.
>>> For partial hotplug case, where not all PCI devices belonging to the
>>> PE are unplugged and plugged again, we just need unbinding/binding
>>> the affected PCI devices with the corresponding PE without creating
>>> new one.
>>>
>>> As there is no upstream bridge for root bus that needs to be covered
>>> by PE, we have to create PE for root bus in ppc_md.pcibios_setup_bridge()
>>> before any other PEs can be created, as PE for root bus is the ancestor
>>> to anyone else.
>>
>> We did not need a root bus PE before? What is the other PE reserved for?
>> Comments only say "reserved"...
>>
>
> No, A PE for root bus is needed before.

Ok. We needed a PE for the root bus and we need it now. What changed? Why 
do you reserve another PE?


>
other PEs can be for the PCI bus
> originated from root port and the subordinate domains.
>
>>>
>>> Also, the windows of root port or the upstream port of PCIe switch behind
>>> root port are extended to be PHB's apertures to accommodate the additional
>>> resources needed by newly plugged devices based on the fact: hotpluggable
>>> slot is behind root port or downstream port of the PCIe switch behind
>>> root port. The extension for those PCI brdiges' windows is done in
>>> ppc_md.pcibios_setup_bridge() as well.
>>
>>
>> This patch seems to be doing way too many things, hard to follow.
>>
>> Could you please split the patch into smaller chunks? For example (you can do
>> it totally different):
>> - move pnv_pci_ioda_setup_opal_tce_kill()
>> - move PE creation from pnv_pci_ioda_fixup() to pnv_pci_setup_bridge();
>> - add pnv_pci_fixup_bridge_resources()
>> - add an extra reserved PE for the root bus (and all this magic with
>> root_pe_idx/root_pe_populated)
>> - ...
>>
>
> I'll evaluate it later. It's always nice to have small patches. Thanks
> for the comments.
>
>>
>>
>>
>> --
>> Alexey
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Alexey