Re: Ublox Toby Modem

[Yorn <yorn@gmx.net>]

[-- Attachment #1: Type: text/plain, Size: 4872 bytes --]

Hi Dragos,

it is still active=0 :(

root(a)colibri-vf:~/test# ./list-contexts
[ /ublox_0 ]
     [ /ublox_0/context1 ]
         Username =
         AuthenticationMethod = chap
         Protocol = ip
         Name = Internet
         Settings = { }
         IPv6.Settings = { }
         Active = 0
         AccessPointName =
         Password =
         Type = internet

BR- Yorn

Am 20.04.2016 um 16:18 schrieb Dragos Tatulea:
> Hi,
>
> On 04/20/2016 04:11 PM, Yorn wrote:
>> + adding ofono mailinglist as it may be of interest
>>
> Thanks.
>
>> Point is, that I am trying to run the u-blox on ofono+connman and had/have some questions regarding the setup.
>> I compiled the git version of the ofono for a freescale vf610 board with an onboard ublox usb adapter and got quite far.
>>
>> A manual setup on pppd+peer+provider+chat script gave me a clean internet connection.
>>
>> Now I want to integrate that with ofono/connman. I got ofono finding the module, advertise it as a cellular technology to connman, but no service is showing up.
>>
>> I will go on setting up the umts high throughput profile.
>>
>> So the rest of the story can be found below!
>>
>> @Dragos:
>> without any changes, I got
>> lsusb:
>> 1546:1146 U-Blox AG (which is high performance?)
>>
> Good. Now we're on stable grounds :).
>   
>> online modem runs without any complains, but without any changes
>> root(a)colibri-vf:~/test# ./online-modem
>> Setting modem /ublox_0 online...
>>
> Can you check the output of list-contexts now? You should see one active.
> And if that is so, you should also see a connman cellular service present.
>
>> BR - Yorn (Jörn)
>>
>>
>> Am 20.04.2016 um 15:16 schrieb Dragos Tatulea:
>>> Hi Jörn,
>>>
>>> Can we take this discussion to the connman/ofono ml? Other people
>>> might find this useful.
>>>
>>> On 04/20/2016 03:01 PM, Jörn wrote:
>>>> Hi Dragos,
>>>>
>>>> I got python to work for the test scripts, this is what it gave [1]. I believe I am just a minute away ..
>>>>
>>> Good.
>>>
>>>> I got the connection up and running on a manual (old fassioned) way with pppd, chat and provider script. However I am not an expert on ofono/connman yet (but trying hard ...).
>>>>
>>>> I firstly wanted to use 2g/3g with high performance mode (as I saw your effort has been put on this point, right?). I am rather not sure, how to configure that without having a connman service.
>>> The AT Commands Examples [1] documents that (USB configuration section).
>>> You should change the mode manually. A successful set will yield the
>>> following ids from lsusb:
>>>
>>> 1546:1140 U-Blox AG
>>>
>>>
>>>> BR - Jörn
>>>>
>>>> [1]
>>>> root(a)colibri-vf:~/test# ./activate-context
>>>> Error activating /ublox_0/context1: org.ofono.Error.NotAttached: GPRS is not attached
>>>> root(a)colibri-vf:~/test# ./list-contexts
>>>> [ /ublox_0 ]
>>>>       [ /ublox_0/context1 ]
>>>>           Username =
>>>>           AuthenticationMethod = chap
>>>>           Protocol = ip
>>>>           Name = Internet
>>>>           Settings = { }
>>>>           IPv6.Settings = { }
>>>>           Active = 0
>>>>           AccessPointName =
>>>>           Password =
>>>>           Type = internet
>>>>
>>>> root(a)colibri-vf:~/test# ./list-modems
>>>> [ /ublox_0 ]
>>>>       Features = net gprs sim
>>>>       Emergency = 0
>>>>       Powered = 1
>>>>       Lockdown = 0
>>>>       Interfaces = org.ofono.NetworkRegistration org.ofono.ConnectionManager org.ofono.SimManager
>>>>       Online = 1
>>>>       Model = TOBY-L210
>>>>       Revision = 09.71
>>>>       Type = hardware
>>>>       Serial = 352255060097262
>>>>       Manufacturer = u-blox
>>>>       [ org.ofono.NetworkRegistration ]
>>>>           Status = roaming
>>>>           Strength = 60
>>>>           Name = Tele2 M2M (E-Plus)
>>>>           LocationAreaCode = 0
>>>>           Mode = auto
>>>>           MobileCountryCode = 262
>>>>           Technology = hspa
>>>>           CellId = 16
>>>>           MobileNetworkCode = 03
>>>>       [ org.ofono.ConnectionManager ]
>>>>           Powered = 1
>>>>           Attached = 0
>>>>           Bearer = none
>>>>           RoamingAllowed = 0
>>>>       [ org.ofono.SimManager ]
>>>>           ServiceProviderName = Tele2 M2M
>>>>           Retries = [pin2 = 3] [puk2 = 10] [pin = 3] [puk = 10]
>>>>           MobileCountryCode = 240
>>>>           FixedDialing = 0
>>>>           SubscriberNumbers =
>>>>           PreferredLanguages = en
>>>>           BarredDialing = 0
>>>>           CardIdentifier = 89462046051001005763
>>>>           LockedPins =
>>>>           MobileNetworkCode = 07
>>>>           SubscriberIdentity = 240075810199181
>>>>           Present = 1
>>>>           PinRequired = none
>>>>
>>>>
> Thanks