From: Dan Murphy <dmurphy@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Date: Wed, 20 Apr 2016 14:41:35 -0500 [thread overview]
Message-ID: <5717DB6F.8060005@ti.com> (raw)
In-Reply-To: <1460723242-20805-1-git-send-email-dmurphy@ti.com>
Bump?
On 04/15/2016 07:27 AM, Dan Murphy wrote:
> Add the ability to read the phy-handle node of the
> cpsw slave. Upon reading this handle the phy-id
> can be stored based on the reg node in the DT.
>
> The phy-handle also needs to be stored and passed
> to the phy to access any phy data that is available.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v6 - Fix build error when DM_ETH is not defined and updated phy_handle error handling - https://patchwork.ozlabs.org/patch/608763/
>
> drivers/net/cpsw.c | 20 ++++++++++++++++++--
> include/cpsw.h | 1 +
> 2 files changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
> index 7104754..3d6f0ce 100644
> --- a/drivers/net/cpsw.c
> +++ b/drivers/net/cpsw.c
> @@ -965,6 +965,11 @@ static int cpsw_phy_init(struct cpsw_priv *priv, struct cpsw_slave *slave)
> phydev->supported &= supported;
> phydev->advertising = phydev->supported;
>
> +#ifdef CONFIG_DM_ETH
> + if (slave->data->phy_of_handle)
> + phydev->dev->of_offset = slave->data->phy_of_handle;
> +#endif
> +
> priv->phydev = phydev;
> phy_config(phydev);
>
> @@ -1217,8 +1222,19 @@ static int cpsw_eth_ofdata_to_platdata(struct udevice *dev)
> if (phy_mode)
> priv->data.slave_data[slave_index].phy_if =
> phy_get_interface_by_name(phy_mode);
> - fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2);
> - priv->data.slave_data[slave_index].phy_addr = phy_id[1];
> +
> + priv->data.slave_data[slave_index].phy_of_handle =
> + fdtdec_lookup_phandle(fdt, subnode, "phy-handle");
> +
> + if (priv->data.slave_data[slave_index].phy_of_handle >= 0) {
> + priv->data.slave_data[slave_index].phy_addr =
> + fdtdec_get_int(gd->fdt_blob,
> + priv->data.slave_data[slave_index].phy_of_handle,
> + "reg", -1);
> + } else {
> + fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2);
> + priv->data.slave_data[slave_index].phy_addr = phy_id[1];
> + }
> slave_index++;
> }
>
> diff --git a/include/cpsw.h b/include/cpsw.h
> index cf1d30b..ff95cd8 100644
> --- a/include/cpsw.h
> +++ b/include/cpsw.h
> @@ -21,6 +21,7 @@ struct cpsw_slave_data {
> u32 sliver_reg_ofs;
> int phy_addr;
> int phy_if;
> + int phy_of_handle;
> };
>
> enum {
--
------------------
Dan Murphy
next prev parent reply other threads:[~2016-04-20 19:41 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-15 12:27 [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node Dan Murphy
2016-04-15 12:27 ` [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the " Dan Murphy
2016-04-20 19:41 ` Dan Murphy
2016-04-21 5:46 ` Michal Simek
2016-04-21 11:51 ` Tom Rini
2016-04-21 13:42 ` Michal Simek
2016-04-25 21:39 ` Joe Hershberger
2016-04-15 12:27 ` [U-Boot] [PATCH v6 3/7] net: phy: dp83867: Add device tree bindings and documentation Dan Murphy
2016-04-21 6:00 ` Mugunthan V N
2016-04-25 21:40 ` Joe Hershberger
2016-04-15 12:27 ` [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable Dan Murphy
2016-04-21 6:00 ` Mugunthan V N
2016-04-25 21:35 ` Joe Hershberger
2016-04-26 21:44 ` Joe Hershberger
2016-04-27 15:46 ` Dan Murphy
2016-04-28 4:52 ` Joe Hershberger
2016-04-28 6:26 ` Michal Simek
2016-04-28 12:26 ` Dan Murphy
2016-04-15 12:27 ` [U-Boot] [PATCH v6 5/7] net: phy: Move is_rgmii helper to phy.h Dan Murphy
2016-04-21 6:00 ` Mugunthan V N
2016-04-25 21:36 ` Joe Hershberger
2016-04-15 12:27 ` [U-Boot] [PATCH v6 6/7] net: phy: Add phy_interface_is_sgmii " Dan Murphy
2016-04-21 6:01 ` Mugunthan V N
2016-04-25 21:40 ` Joe Hershberger
2016-04-15 12:27 ` [U-Boot] [PATCH v6 7/7] net: phy: dp83867: Add SGMII helper for configuration Dan Murphy
2016-04-21 6:01 ` Mugunthan V N
2016-04-25 21:37 ` Joe Hershberger
2016-04-20 19:41 ` Dan Murphy [this message]
2016-04-21 5:59 ` [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node Mugunthan V N
2016-04-25 21:32 ` Joe Hershberger
2016-04-26 21:42 ` Joe Hershberger
2016-04-27 15:44 ` Dan Murphy
2016-04-28 4:47 ` Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5717DB6F.8060005@ti.com \
--to=dmurphy@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.