From mboxrd@z Thu Jan  1 00:00:00 1970
Content-Type: multipart/mixed; boundary="===============8669254573156224431=="
MIME-Version: 1.0
From: Dragos Tatulea <dragos@endocode.com>
Subject: Re: Ublox Toby Modem
Date: Fri, 22 Apr 2016 12:23:46 +0200
Message-ID: <5719FBB2.90606@endocode.com>
In-Reply-To: <57191DE0.50601@gmx.net>
List-Id: <ofono.ofono.org>
To: ofono@ofono.org

--===============8669254573156224431==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Hi Yorn,

On 04/21/2016 08:37 PM, Yorn wrote:
> Hi Dragos
> =

> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>> Hi Yarn,
>>
>> On 04/20/2016 07:54 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> logs + comments inline
>>>
>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>> Hi Yorn,
>>>>
>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>> Hi Dragos,
>>>>>
>>>>> it is still active=3D0 :(
>>>>>
>>>>> root(a)colibri-vf:~/test# ./list-contexts
>>>>> [ /ublox_0 ]
>>>>>       [ /ublox_0/context1 ]
>>>>>           Username =3D
>>>>>           AuthenticationMethod =3D chap
>>>>>           Protocol =3D ip
>>>>>           Name =3D Internet
>>>>>           Settings =3D { }
>>>>>           IPv6.Settings =3D { }
>>>>>           Active =3D 0
>>>>>           AccessPointName =3D
>>>>>           Password =3D
>>>>>           Type =3D internet
>>>>>
>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable s=
et
>>>> and run the following scripts:
>>>>
>>>> enable-modem
>>>> online-modem
>>>> activate-context
>>>>
>>>> Then send the logs.
>>> Here they are [1]
> =

> I am actually a bit lost in the ublox AT Commands manual..
> =

> Do you have a chance to see something at the ofonod+AT logs with your exp=
ertice!?
> =

oFono was able to register on the network an activate the context. This
part is interesting for you:

ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary(=
) cid 1
ofonod[369]: Aux: > AT\r
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: Aux: Finally woke up the modem
ofonod[369]: Aux: > AT+CGDCONT=3D1,"IP","m2m.tele2.com"\r
*> context defined

ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
ofonod[369]: Aux: > AT+CGACT=3D1,1\r
*> context activated

ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
ofonod[369]: Aux: > AT+CGCONTRDP=3D1\r
ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN A=
CT 1\r\n
ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 t=
ech 4
ofonod[369]: src/gprs.c:netreg_status_changed() 5
ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
ofonod[369]: Aux: < 100.98.55.207.255.255.255.255","100.98.55.207","130.244=
.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
ofonod[369]: Aux: < \r\nOK\r\n
*> connection properties read successfully

ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property Netw=
orkInterface

> The connman cellular service is set to "a" (association) from starting
> connect cellular_240075810199181_context1
> up until timeout.
> =

Do you still run the oFono scripts? From the logs it looks like connman
is trying to activate an already active context.


As a side note, oFono and ConnMan have persistent states for services and
contexts. They are stored under /var/lib/ofono|connman. When debugging I
found it useful sometimes to start with a clean state.

Thanks
-- =

Dragos Tatulea
Software Developer @ Endocode AG
dragos(a)endocode.com

Endocode AG, Br=C3=BCckenstra=C3=9Fe 5A, 10179 Berlin
+49 30 1206 4472 | info(a)endocode.com | www.endocode.com

Vorstandsvorsitzender: Mirko Boehm
Vorst=C3=A4nde: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm

Registergericht: Amtsgericht Charlottenburg - HRB 150748 B

--===============8669254573156224431==--