From: "Iñaki Pascual" <ipascual@cttc.cat>
To: ath10k@lists.infradead.org
Subject: low TCP throughput with 80MHz channel width
Date: Fri, 22 Apr 2016 17:32:44 +0200 [thread overview]
Message-ID: <571A441C.9040307@cttc.cat> (raw)
Hi everyone,
we have configured two boxes with 802.11ac NICs to work in channel 48
(5240 MHz), ad-hoc mode, 80MHz channel width.
For UDP traffic we get 300 Mbps bandwith but for TCP we are around 30 Mbps.
We have tried other channels with similar results.
Throughput for 20 and 40 MHz channel width are ok (20MHz: TCP 21Mbps,
UDP 27Mbps, 40MHz: TCP 82Mbps, UDP 144Mbps).
Testing with iperf we have also tried different congestion windows with
no or low improvements.
Below are config details and the sequence of commands we are using to
configure the interface.
Any ideas on what we may be doing wrong?
Bests,
Iñaki
iw outputs:
root@sc227:/home/monet# iw wlan2 info
Interface wlan2
ifindex 6
wdev 0x200000001
addr 04:f0:21:18:26:a2
ssid SC226SC227
type IBSS
wiphy 2
channel 48 (5240 MHz), width: 80 MHz, center1: 5210 MHz
root@sc227:/home/monet# iw wlan2 station dump
Station 04:f0:21:18:26:a8 (on wlan2)
inactive time: 86 ms
rx bytes: 467732521
rx packets: 364249
tx bytes: 1394558
tx packets: 16200
tx retries: 0
tx failed: 0
signal: -51 dBm
signal avg: -51 dBm
tx bitrate: 351.0 MBit/s VHT-MCS 4 80MHz VHT-NSS 2
rx bitrate: 526.5 MBit/s VHT-MCS 4 80MHz VHT-NSS 3
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
connected time: 3169 seconds
config commands:
ifconfig wlan2 down
iw wlan2 set type ibss
ifconfig wlan2 up
ifconfig wlan2 10.2.1.7 netmask 255.255.255.0
iw wlan2 ibss join SC226SC227 5240 80MHz
iperf:
root@sc227:/home/monet# iperf -c 10.2.1.6
------------------------------------------------------------
Client connecting to 10.2.1.6, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.2.1.7 port 48548 connected with 10.2.1.6 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 33.1 MBytes 27.7 Mbits/sec
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2016-04-22 15:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 15:32 Iñaki Pascual [this message]
2016-04-22 15:40 ` low TCP throughput with 80MHz channel width Ben Greear
2016-04-22 16:02 ` Iñaki Pascual
2016-04-22 16:06 ` Ben Greear
2016-04-22 16:11 ` Iñaki Pascual
2016-04-22 16:16 ` Ben Greear
2016-04-22 16:44 ` Iñaki Pascual
2016-04-22 16:57 ` Ben Greear
2016-04-25 7:48 ` low TCP throughput with 80MHz channel width [SOLVED] Iñaki Pascual
2016-04-25 7:07 ` low TCP throughput with 80MHz channel width Michal Kazior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=571A441C.9040307@cttc.cat \
--to=ipascual@cttc.cat \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.