Re: [PATCH v1 00/23] ata: sata_dwc_460ex: make it working again

[Julian Margetson <runaway@candw.ms>]

On 4/22/2016 7:06 AM, Christian Lamparter wrote:
> On Friday, April 22, 2016 06:50:44 AM Julian Margetson wrote:
>> On 4/21/2016 4:25 PM, Christian Lamparter wrote:
>>> On Thursday, April 21, 2016 09:15:21 PM Andy Shevchenko wrote:
>>>> The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
>>>> DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
>>>> Besides that we expecting new board support coming with the same SATA IP but
>>>> with different DMA.
>>>>
>>>> The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
>>>> boards. In any case I ask Christian, Måns, and Julian to independently test and
>>>> provide Tested-by tag or error report.
>>> I did a test run on my WD MyBook Live. I applied all the patches in
>>> this series on top of the topic/dw branch of Vinod Koul:
>>> <https://git.kernel.org/cgit/linux/kernel/git/vkoul/slave-dma.git/>
>>>
>>> Tested-by: Christian Lamparter<chunkeey@googlemail.com>
>>> ---
>>> results for my old ST3808110AS HDD. filesystem is ext4.
>>>
>>> # hdparm -t /dev/sda
>>>
>>> /dev/sda:
>>>    Timing buffered disk reads: 204 MB in  3.02 seconds =  67.51 MB/sec
>>>
>>> # bonnie++ -u mbl
>>> Using uid:1000, gid:1000.
>>> Writing a byte at a time...done
>>> Writing intelligently...done
>>> Rewriting...done
>>> Reading a byte at a time...done
>>> Reading intelligently...done
>>> start 'em...done...done...done...done...done...
>>> Create files in sequential order...done.
>>> Stat files in sequential order...done.
>>> Delete files in sequential order...done.
>>> Create files in random order...done.
>>> Stat files in random order...done.
>>> Delete files in random order...done.
>>> Version  1.97       ------Sequential Output------ --Sequential Input- --Random-
>>> Concurrency   1     -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
>>> Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
>>> mbl            496M    98  99 26011  21 17589  20   538  99 80138  39 208.9   8
>>> Latency             95267us    1409ms     295ms   26947us    9644us    1787ms
>>> Version  1.97       ------Sequential Create------ --------Random Create--------
>>> mbl                 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
>>>                 files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
>>>                    16  6959  78 +++++ +++  5197  40  7250  79 +++++ +++  4718  37
>>> Latency               149ms    6742us     212ms     177ms     767us     217ms
>>> 1.97,1.97,mbl,1,1461269771,496M,,98,99,26011,21,17589,20,538,99,80138,39,208.9,8,16,,,,,6959,78,+++++,+++,5197,40,7250,79,+++++,+++,4718,37,95267us,1409ms,295ms,26947us,9644us,1787ms,149ms,6742us,212ms,177ms,767us,217ms
>>>
>> Again on copy partitions .
> Ok, here's the copy from my mail off-list.
>
> Well, a unrelated driver "m41t80" caused a crash:
> [   12.912739] Oops: Kernel access of bad area, sig: 11 [#3]
> [   12.912743] PREEMPT Canyonlands
> [   12.912753] CPU: 0 PID: 1413 Comm: irq/45-m41t80 Tainted: G      D         4.6.0-rc4-next-20160421-sam460ex-jm #1
> [   12.912757] task: ea9834e0 ti: eea6c000 task.ti: eea6c000
> [   12.912760] NIP: c0224480 LR: c0023494 CTR: c0042508
> [   12.912764] REGS: eea6daf0 TRAP: 0300   Tainted: G      D          (4.6.0-rc4-next-20160421-sam460ex-jm)
> [   12.912774] MSR: 00029000 <CE,EE,ME>  CR: 24008282  XER: 00000000
> [   12.912825] DEAR: 00000008 ESR: 00000000
> [...]
> [   12.912927] --- interrupt: 300 at mutex_lock+0x0/0x1c
> [   12.912927]     LR = m41t80_handle_irq+0x28/0xac
> [   12.912932] [eea6de40] [00000000]   (null) (unreliable)
> [   12.912938] [eea6de60] [c004ffac] irq_thread_fn+0x2c/0x48
> [   12.912944] [eea6de80] [c00501cc] irq_thread+0xc4/0x160
> [   12.912951] [eea6ded0] [c003a3f8] kthread+0xc8/0xcc
> [   12.912957] [eea6df40] [c000aee8] ret_from_kernel_thread+0x5c/0x64
> [   12.912960] Instruction dump:
> [   12.912974] 80010014 7fc3f378 bbc10008 7c0803a6 38210010 4be24ca8 9421ffd0 7c0802a6
> [   12.912987] bf210014 90010034 3b4302d8 812302ec <83890008> 812302d8 7f9a4840 419e011c
> [   12.912995] Fixing recursive fault but reboot is needed!
>                   ^^^ "reboot is needed!"
>
> Another thing that came to my mind: Have you checked if your hard drive
> and the cables are ok? Are there any pending sectors or suspicious smart
> values? Has the drive passed the extended offline test?
>   
> Otherwise, I can't reproduce the error with my MyBook system. I've tested
> your kernel and it worked on the device without crashing. (I copied/dd'ed
> 80GB from and back to the hard-drive. It was long and boring, but I didn't
> encounter any issues and the crc32 matched).
>
> Sorry, but I can't help you if I can't reproduce it... And short of sending
> your box to test, I see no efficient way to debug it. However, what I can
> do, if you are interested: I have a few "build your own" My Book Live kits.
> It just needs a 3.5" hard-drive and 12v power adapter. If you are interested
> PM me off-list, this way you can verify that the kernels you build do work,
> just in case this error is due to a hardware issue (zapped controller,
> bad ram/drive/cable?) with your sam460ex box.
>
> Regards,
> Christian
>
>
My Hardware seems ok.
I have swapped cables and drives between the SII3512 pci controller and 
the DWC controller.
No issues when connected to the SII3512 pci controller .
The DWC controller works ok under AmigaOS 4.1FE so that does not appear 
to be a problem.

Regards
Julian