From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
To: Francois Romieu <romieu@fr.zoreil.com>, netdev@vger.kernel.org
Cc: davem@davemloft.net
Subject: Re: [PATCH net-next 1/1] pch_gbe: replace private tx ring lock with common netif_tx_lock
Date: Wed, 27 Apr 2016 10:55:38 +0200 [thread overview]
Message-ID: <57207E8A.8030004@cumulusnetworks.com> (raw)
In-Reply-To: <20160426224921.GA29558@electric-eye.fr.zoreil.com>
On 04/27/2016 12:49 AM, Francois Romieu wrote:
> pch_gbe_tx_ring.tx_lock is only used in the hard_xmit handler and
> in the transmit completion reaper called from NAPI context.
>
> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
> ---
> CONFIG_COMPILE_TESTed
>
> drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 --
> drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 10 ++--------
> 2 files changed, 2 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> index 2a55d6d..8d710a3 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
> @@ -481,7 +481,6 @@ struct pch_gbe_buffer {
>
> /**
> * struct pch_gbe_tx_ring - tx ring information
> - * @tx_lock: spinlock structs
> * @desc: pointer to the descriptor ring memory
> * @dma: physical address of the descriptor ring
> * @size: length of descriptor ring in bytes
> @@ -491,7 +490,6 @@ struct pch_gbe_buffer {
> * @buffer_info: array of buffer information structs
> */
> struct pch_gbe_tx_ring {
> - spinlock_t tx_lock;
> struct pch_gbe_tx_desc *desc;
> dma_addr_t dma;
> unsigned int size;
> diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> index ca4add7..5c8e2f1 100644
> --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
> @@ -1640,7 +1640,7 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
> cleaned_count);
> if (cleaned_count > 0) { /*skip this if nothing cleaned*/
> /* Recover from running out of Tx resources in xmit_frame */
> - spin_lock(&tx_ring->tx_lock);
> + netif_tx_lock(adapter->netdev);
> if (unlikely(cleaned && (netif_queue_stopped(adapter->netdev))))
> {
> netif_wake_queue(adapter->netdev);
> @@ -1652,7 +1652,7 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
>
> netdev_dbg(adapter->netdev, "next_to_clean : %d\n",
> tx_ring->next_to_clean);
> - spin_unlock(&tx_ring->tx_lock);
> + netif_tx_lock(adapter->netdev);
Shouldn't this be netif_tx_unlock ?
> }
> return cleaned;
> }
> @@ -1805,7 +1805,6 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter,
>
> tx_ring->next_to_use = 0;
> tx_ring->next_to_clean = 0;
> - spin_lock_init(&tx_ring->tx_lock);
>
> for (desNo = 0; desNo < tx_ring->count; desNo++) {
> tx_desc = PCH_GBE_TX_DESC(*tx_ring, desNo);
> @@ -2135,13 +2134,9 @@ static int pch_gbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
> {
> struct pch_gbe_adapter *adapter = netdev_priv(netdev);
> struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&tx_ring->tx_lock, flags);
>
> if (unlikely(!PCH_GBE_DESC_UNUSED(tx_ring))) {
> netif_stop_queue(netdev);
> - spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
> netdev_dbg(netdev,
> "Return : BUSY next_to use : 0x%08x next_to clean : 0x%08x\n",
> tx_ring->next_to_use, tx_ring->next_to_clean);
> @@ -2150,7 +2145,6 @@ static int pch_gbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
>
> /* CRC,ITAG no support */
> pch_gbe_tx_queue(adapter, tx_ring, skb);
> - spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
> return NETDEV_TX_OK;
> }
>
>
next prev parent reply other threads:[~2016-04-27 8:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 22:49 [PATCH net-next 1/1] pch_gbe: replace private tx ring lock with common netif_tx_lock Francois Romieu
2016-04-27 8:55 ` Nikolay Aleksandrov [this message]
2016-04-27 21:28 ` Francois Romieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57207E8A.8030004@cumulusnetworks.com \
--to=nikolay@cumulusnetworks.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.